苏南地区农村河塘底泥中重金属污染调查与评价

对苏南地区农村河塘底泥中重金属的污染物状况及分布特征进行了调查,分别在镇江、宜兴和常州采集了农村居民生活区、农田附近和养殖厂周围13个底泥样品,对底泥中的5种重金属Zn、Cu、Cd、Pb、Cr质量比进行了分析研究,并利用Hakason生态风险指数法评价了底泥中5种重金属对其所在水域的污染程度,对水域和周围环境造成的潜在风险影响.结果表明,苏南地区部分农村河塘底泥已受到轻度的重金属污染,部分采样点Cd、Cu和Zn已达到中度污染;不同类型底泥的重金属的污染程度趋势为:居民生活区＞养殖厂周围＞农田附近.     

徐州城市表层土壤中重金属的富积、分布特征与环境风险

研究了徐州城市表层土壤的21个样品中30种元素的富集与分布特征。结果表明,与我国土壤元素的背景值(算术平均值)相比,表层土壤中Zn、Cd、As、Hg、Sb、Sn、Ag等元素富集大;Fe、Se、Sc、Ba、Bi、Pb、Cu、Ni、Cr、Mn、Mo、Be、Ti、Al、Ga、Li、Co等元素的富集较小。污染元素的空间分布特征显示了Zn、Cu、Pb、Cd等元素主要与交通运输等扩散污染源相关,而元素As、Sb的空间分布主要与工业污染源(点源)有关。环境风险指数的计算结果表明,表层土壤中重金属污染具有较大的环境风险,其中属于中等环境风险级别以上的样品占近40%,而且高风险区域主要集中在钢铁厂和化机厂等工业区范围内。     

Multipoint source method in air pollution modelling of cold start emission

The paper presents a new method of air pollution modelling on a micro scale. For estimation of concentration of car exhaust pollutants, each car is treated as an instantaneous moving emission source. This approach enables us to model time and spatial changes of emission, especially during cold and cool start of an engine. These stages of engine work are a source of significant pollution concentration in urban areas. In this work, two models are proposed: one for the estimation of emission after cold start of the engine and another for the prediction of pollutant concentration. The first model (defined for individual exhaust gas pollutants) enables us to calculate the emission as a function of time after the cold or cool start, ambient temperature and average speed of motion. This model uses the HBEFA database. The second mathematical model is developed in order to calculate the pollutant dispersion and concentrations. The finite volume method is applied to discretise the set of partial differential equations describing wind flow and pollutant dispersion in the domain considered. Models presented in this paper can be called short-term models on a small spatial scale. The results of numerical simulation of pollutant emission and dispersion are also presented.     

CHLORINATED HYDROCARBON (HCB, DDTs AND PCBs LEVELS IN CETACEANS STRANDED ALONG THE ITALIAN COASTS: AN OVERVIEW

Concentrations of HCB, DDTs and PCBs in the tissues andorgans of cetaceans ( Stenella coeruleoalba, Tursiops truncatus, Balaenoptera physalus, Steno bredanensis}, Grampus griseus} and Globicephala melaena) strandedalong the Italian coasts in the period 1987–1993 are reported. The values are compared between speciesand between specimens of the samespecies. Chlorinated hydrocarbon (CH) levels were found toincrease in relation to the quantity andtype of lipids in each tissue and organ. Differences inaccumulation encountered in the differentspecies are principally due to different feeding habitats.Remarkable differences found between malesand females of each species confirm that during gestation andlactation, females undergo disintoxication by passing much of their total burden of CHs to their young.     

农业土壤危险废物污染的风险管理

从环境风险管理出发,探讨危险废物对农业土壤污染的途径,提出土壤危险废物污染的风险管理内容和方法,初步建立辽宁省农业土壤危险废物污染的预警指标体系。     

第三产业风机、冷却塔噪声污染防治浅谈

随着社会的发展，尤其是第三产业的不断兴起，其噪声污染问题日益突出。本文从对噪声扰民案件入手、分析，发现风机和冷却塔噪声污染最为严重。针对主要污染源，从技术方面提出了解决噪声污染的方法，为环境管理，治理提供科学依据。     

汽车尾气污染及其净化处理技术

本文详细阐述了汽车尾气的有害成份及其对人类健康的危害。为此 ,应该采取净化处理措施 ,减少或者消除有害气体的产生 ,为大气环境洁净而创造条件。     

含钒石煤烧渣的稳定化试验研究

研究了含钒石煤烧渣稳定化处理的一种有效方法。利用石灰为稳定剂与烧渣相混合进行稳定化处理，渣中的水溶态钒转化为钒酸钙沉淀而降低毒性。浸出试验表明，水中钒浓度〈5mg／h，并且具有长期的稳定性，无二次污染。     

我国城市降雨径流污染控制模式探讨

随着城市的发展与点源污染控制的不断完善,城市降雨径流污染日益突出,对城市水体构成严重威胁,必须得到有效的控制。对国内外城市降雨径流污染控制模式进行了比较,并结合我国的实际情况,首次提出了双重控制模式,以期为我国城市降雨径流污染的控制与决策提供参考和借鉴。     

Ecoprofit-Styria-prepare Thirteen pollution prevention case studies in the Styrian industry

The paper focuses upon the organization of a federal state-funded pollution prevention project in the Styrian industry. The project includes 13 companies from the textile, pulp and paper, machine building, wood working and printed circuit board manufacturing industries, covering most of the sectors and sizes in the Styrian industry. It started in January 1994 and will last for one year. It will demonstrate the possibilities of pollution prevention and the need for further research work. This project will make use of the methods and tools that were refined in the Austrian Prepare project. As a first step, a systematic balance of all the inputs and outputs of a company is made, after which the weak points and inefficiencies of material and energy use are identified and the options for improvements, both economical and ecological, are defined. Consequently, modifications in products and production lead to a situation with less waste and emissions. The preliminary lessons from these projects are presented: as a rule, the utilities (consumption of process materials and water, cleaning, energy, preparatory and finishing steps) are treated as black boxes and usually represent a considerable optimization potential. In these areas especially there is usually a lack of information and coordination as well as a need for a systematic and comprehensive approach. Leadership in the company and creative consultants are needed for starting lasting successful pollution prevention projects.