优势微生物菌群消减有机污泥作用效果分析

本文阐述用优势微生物菌群消解有机污泥的作用效果及原因,指出了优势菌群的构成类别和消解特点。实验结果表明,污泥消解率可达到55%,且过程对出水水质不产生负面影响,水质指标均符合GB18918-2002要求。     

周期性的温度扰动对藻类群落结构演替的影响

为了研究水库生境扰动对藻类水华的作用机制,以中度扰动理论为基础,结合藻类群落生境选择学说和藻类生态功能组,开展了不同温度扰动周期、相同扰动幅度下藻类多样性变化特性和群落结构演替特征的室内控制实验.结果表明:1适度的扰动会促进藻类的生长且增加其多样性.中度扰动组Δ22℃/48 h藻类生物量最大,但多样性最高,不存在绝对占优藻种,而高频次扰动组Δ22℃/24 h生物多样性较小,但可降低藻类生物量.2温度的周期性变化对浮游藻类群落的演替有明显的影响,优势种也呈现一定的差异性.藻类优势功能组演替基本规律为:X_1(小球藻)→J(栅藻)→S_1(席藻)或X_2(衣藻),群落结构呈现出C/CR型藻类先行占优向R型演替的趋势.高温扰动频繁时,R型藻类(S_1)明显占优;无扰动或低扰动时,群落结构组成特点以C/R策略为主.适度的扰动组Δ22℃/48 h形成了多种生长策略的藻类共存的格局,且耐受高温胁迫的S策略藻类(L_0)开始出现.     

改性沸石湿地脱氮除磷效能及机制

为明确改性沸石湿地对分散性农村生活污水中氮磷的去除效能,并探索其脱氮除磷机制,将改性沸石作为折流湿地填料层填料,应用于厌氧折流板反应器(ABR)+折流湿地(BFCW)组合工艺,为苏州市农村生活污水处理提供新途径.结果表明,改性沸石湿地对氮磷去除良好且稳定,脱氮量和除磷量较沸石湿地分别增大1.8%和1倍多.湿地主要通过填料的吸附截留作用脱氮除磷,以Ca-P和Al-P为主要沉淀磷素形式,植物的泌氧和吸收作用有助于稳定出水水质.湿地前端和后端分别以填料的吸附截留作用和微生物的硝化反硝化作用为主要脱氮途径.改性过程对沸石磷素吸附沉淀性能的大幅提升是在多重途径的协同作用下实现的,湿地构型和植物根系的影响是造成相同区域填料氮磷截留量差异的主要原因.硝化作用强度的高低是改性沸石湿地脱氮效果及稳定性季节性波动的主因.     

改性生物炭负载纳米零价铁去除水体中头孢噻肟

抗生素对环境的危害已经引起了人们的广泛重视.本实验以改性生物炭(MB)为载体制备了负载纳米零价铁的功能生物炭(Fe/MB).以头孢噻肟(CFX)为目标抗生素,研究了该材料对头孢噻肟的降解特性及影响因素,并探讨了去除机理.实验结果表明,50 min内头孢噻肟的去除率为92%(Fe/MB用量为0.4 g·L~(-1),溶液p H=5.0,头孢噻肟浓度为20 mg·L~(-1),振荡速率为200 r·min~(-1),柠檬酸浓度为1.47 mmol·L~(-1)).头孢噻肟的去除过程存在改性生物炭的吸附和纳米零价铁还原降解的协同作用,数据符合伪二级反应动力学方程(R20.99).采用紫外可见光谱结合质谱分析了降解产物的结构并提出头孢噻肟的降解途径.     

HDTMA改性粘土吸附固定沉积物间隙水中多环芳烃的模拟研究

选用经过十六烷三甲基溴化铵(HDTMA-Br)改性的粘土矿物为吸附剂,探讨其对水中多环芳烃类有机污染物的吸附性能。结果表明,HDTMA改性土吸附固定水中多环芳烃的能力比天然沉积物要高得多且吸附稳定。本文还讨论了环境温度、pH值、盐度、振荡时间、污染物初始浓度以及投土量对吸附性能的影响以确定吸附的适宜条件。根据实验结论,将HDTMA改性土投到实际间隙水样品中,经过充分的吸附,结果显示,经HDTMA改性粘土吸附后的间隙水中多环芳烃的含量均在检出线以下,说明HDTMA改性土可以有效地吸附固定沉积物间隙水中的多环芳烃,降低其迁移性,防止其释放产生二次污染。     

Investigation on Fe, Mn, Zn, Cu, Pb and Cd fractions in the natural surface coating samples and surficial sediments in the Songhua River, China

Natural surface coating samples （NSCSs） from the surface of shingles and surficial sediments （SSs） in the Songhua River, China were employed to investigate the relationship between NSCSs and SSs in fractions of heavy metals （Fe, Mn, Zn, Cu, Pb, and Cd） using the modified sequential extraction procedure （MSEP）. The results show that the differences between NSCSs and SSs in Fe fi＇actions were insignificant and Fe was dominantly present as residual phase （76.22% for NSCSs and 80.88% for SSs） and Fe-oxides phase （20.33% for NSCSs and 16.15% for SSs）. Significant variation of Mn distribution patterns between NSCSs and SSs was observed with Mn in NSCSs mainly present in Mn-oxides phase （48.27%） and that in SSs present as residual phase （45.44%）. Zn, Cu, Pb and Cd were found dominantly in residual fractions （〉48%）, and next in solid oxides/hydroxides for Zn, Pb and Cd and in easily oxidizable solids/compounds form for Cu, respectively. The heavy metal distribution patterns implied that Fe/Mn oxides both in NSCSs and SSs were more important sinks for binding and adsorption of Zn, Pb and Cd than organic matter （OM）, and inversely, higher affinity of Cu to OM than Fe/Mn oxides in NSCSs and SSs was obtained. Meanwhile, it was found that the distributions of heavy metals in NSCSs and SSs were similar to each other and the pseudo-total concentrations of Zn, Cu, Pb and Cd in NSCSs were greater than those in SSs, highlighting the more importance for NSCSs than SSs in controlling behaviours of heavy metals in aquatic environments.     

Selecting Species for Marine Assessment of Radionuclides Around Amchitka: Planning for Diverse Goals and Interests

Considerable attention has been devoted to selecting bioindicator species as part of monitoring programs for exposure and effects from contaminants in the environment. Yet the rationale for selection of bioindicators is often literature-based, rather than developed with a firm site-specific base of data on contaminant levels in a diverse range of organisms at different trophic levels in the same ecosystem. We suggest that this latter step is an important phase in the environmental assessment process that is often missing. In this paper we address the problem of how to select a wide range of species representing different trophic levels that serve as a basis for selecting a few species suitable as bioindicators. We illustrate this with our assessment of radionuclides on Amchitka Island, Alaska. We propose a multi-stage process for arriving at the list of available species that includes review of literature, review by experts experienced in the area, review by interested and affected parties, selection of trophic levels or groups for analysis, arraying of possible species, and selection of species within each trophic level group for sample collection. We first had to identify all likely species, then narrow our focus to those we could collect and analyze. In all cases, review includes suggestions for possible target species with justifications. While this method increases the up-front costs of developing bioindicators for an ecosystem, it has the advantage of providing information for selection of species that will be most informative in the long run, including those that are the best bioaccumulators, thus providing the earliest warning of any potential environmental consequences. Further, the recognition that a range of stakeholder's needs and interests should be included increases the utility for public-policy makers, and the potential for continued usage to establish long-term trends.     

改性生物炭负载纳米零价铁活化过硫酸盐降解活性蓝19的机理及老化研究

采用磷酸改性的黍糠基生物炭作为纳米零价铁(Nanoscale zero-valent iron,nZVI)载体,成功制备出一种高效非均相活化材料一磷酸改性生物炭负载纳米零价铁(nZVI@PBC),用来活化过硫酸盐(Persulfate,PS)降解印染废水中的典型染料—活性蓝(Reactive Blue 19,RB19)...     

生态位理论及其在城市竞争研究中的作用——以中原城市群为例

城市生态位作为生态学重要理论之一,可用于分析城市群内部不同城市间竞争、演化等现象。以中原城市群9个省辖市为基本单元,运用生态位理论模型,进行多指标的综合加权和聚类分析,得出如下结论:(1)就中原城市群整体而言,城市生态位偏低且呈现明显的层次分异;(2)中原城市群城市生态位空间分异表现复杂。综合城市生态位、自然生态位及人口生态位空间分异并不明显,而经济生态位和社会生态位空间分异却十分显著,其中经济生态位最为显著;(3)中原城市群缺少4个子系统都具有优势特征的城市,只有郑州独具2项优势特征,但其自然生态位较低,自然生态位是郑州城市生态位的限制性因子。     

聚合氯化铝-腐殖酸(PACl-HA)絮体的物理与分形特征研究

采用低温急速冷冻-真空干燥技术制备了PACl-HA絮体的粉末样品,研究了这些样品的物理与分形特征.结果表明,PACl-HA絮体具有无定形结构,主要组成元素为C、O、Al,所含特征官能团保留了絮体组成原料的一些特征;絮体的BET比表面积为130～161 m²·g^-1,BJH累积吸附孔体积为0.38～0.52 cm³·g^-1,BJH脱附平均孔径为7.7～9.6nm,PSD峰值对应孔径8.4～11.2nm.PACl-HA絮体具有自相似性的粗糙表面,呈现多尺度分形特征;图象法和N₂吸附/脱附等温线法确定的表面分形维数Ds分别为2.03～2.26、2.24～2.37,前者的分形尺度大约处于23～390nm之间,主要属于絮体外表面尺度,而后者的分形特征尺度区间的下限大约为0.2nm,属于孔表面尺度;另外,对同一絮体,N₂吸附法和脱附法确定的孔表面分形维数不同.热力学模型计算出的D_s远大于3,与Sahouli等的研究不符.