Investigation of titanium liquid/gas diffusion layers in proton exchange membrane electrolyzer cells

In a proton exchange membrane electrolyzer cell (PEMEC), liquid/gas diffusion layer (LGDL) is expected to transport electrons, heat, and reactants/products to and from the catalyst layer with minimum voltage, current, thermal, interfacial, and fluidic losses. In addition, carbon materials, which are typically used in PEM fuel cells (PEMFCs), are unsuitable in PEMECs due to the high ohmic potential and highly oxidative environment of the oxygen electrode. In this study, a set of titanium gas diffusion layers with different thicknesses and porosities are designed and examined coupled with the development of a robust titanium bipolar plate. It has been found that the performance of electrolyzer improves along with a decrease in thickness or porosity of the anode LGDL of titanium woven meshes. The ohmic resistance of anode LGDL and contact resistance between anode LGDL and the anode catalyst play dominant roles in electrolyzer performance, and better performance can be obtained by reducing ohmic resistance. Thin titanium LGDLs with straight-through pores and optimal pore morphologies are recommended for the future developments of low-cost LGDLs with minimum ohmic/transport losses.     

餐厨垃圾高温厌氧消化产沼气的试验研究

探究了温度、含固率、pH及接种率对餐厨垃圾厌氧消化产沼量的影响,并设计L9(34)正交试验进行厌氧发酵工艺优化研究。结果表明,在温度为55℃、含固率为8%(质量分数)、pH为7.00、接种率为90%(质量分数)时,厌氧发酵累积产沼量为809.0mL/g(以挥发性固体计);各影响因素对产沼量的影响大小为温度pH接种率含固率。     

Composting of waste algae: A review

Although composting has been successfully used at pilot scale to manage waste algae removed from eutrophied water environments and the compost product applied as a fertiliser, clear guidelines are not available for full scale algae composting. The review reports on the application of composting to stabilize waste algae, which to date has mainly been macro-algae, and identifies the peculiarities of algae as a composting feedstock, these being: relatively low carbon to nitrogen (C/N) ratio, which can result in nitrogen loss as NH₃ and even N₂O; high moisture content and low porosity, which together make aeration challenging; potentially high salinity, which can have adverse consequence for composting; and potentially have high metals and toxin content, which can affect application of the product as a fertiliser. To overcome the challenges that these peculiarities impose co-compost materials can be employed.     

5种植物材料的水解释碳性能及反硝化效率

碳源在硝酸盐去除过程中起电子供体的作用,是生物反硝化反应的关键物质之一。为解决污水处理脱氮时碳源不足抑制反硝化反应造成脱氮效率低的问题,本研究选取风车草、甘蔗渣、芦竹、美人蕉和稻草秆5种植物材料作为反硝化碳源,探讨不同植物材料的水解释碳能力和释放规律;并进一步以其水解液作为外加碳源,探讨其对反硝化脱氮效率的影响。研究结果表明,植物材料水解释碳过程符合二级动力学反应规律,不同植物材料的释碳能力具有显著性差异,以甘蔗渣在固液比1∶80时COD释放当量最大,为45.45 mg/L;添加植物水解液可显著提高反硝化脱氮效率,以芦竹水解液脱氮效果最好,达到71.9%。此外,碳氮比是影响脱氮效率的重要因素之一,以碳氮比为9时反硝化脱氮效果最佳。     

Fate of azadirachtin A and related azadirachtoids on tomatoes after greenhouse treatment

The degradation of the main azadirachtoids on tomatoes was studied after greenhouse treatment. These experiments were carried out at 1 and 5× the concentration recommended by the manufacturer. In all experiments the deposition of azadirachtin A (AZA-A) was below the maximum residue level (MRL). Even if at the highest dose, AZA-A half-life time calculated as pseudo first order kinetic was 1.2 days in agreement with the recommended preharvest interval (PHI) of 3 days. Experiments with a model system showed that sunlight photodegradation is the main factor influencing the rate of disappearance of AZA-A after greenhouse treatment while tomato epicuticular waxes doubled the photodegradation rate of AZA-A in a commercial formulation.     

Treating solid dairy manure using microwave-enhanced advanced oxidation process

The microwave enhanced advanced oxidation process (MW/H₂O₂-AOP) was used to treat separated solid dairy manure for nutrient release and solids reduction. The MW/H₂O₂-AOP was conducted at a microwave temperature of 120°C for 10 minutes, and at three pH conditions of 3.5, 7.3 and 12. The hydrogen peroxide dosage at approximately 2 mL per 1% TS for a 30 mL sample was used in this study, reflecting a range of 0.53–0.75 g H₂O₂/g dry sludge. The results indicated that substantial quantities of nutrients could be released into the solution at pH of 3.5. However, at neutral and basic conditions only volatile fatty acids and soluble chemical oxygen demand could be released. The analyses on orthophosphate, soluble chemical oxygen demands and volatile fatty acids were re-examined for dairy manure. It was found that the orthophosphate concentration for untreated samples at a higher % total solids (TS) was suppressed and lesser than actual. To overcome this difficulty, the initial orthophosphate concentration had to be measured at 0.5% TS.     

The electron density distribution in pyridinium and bipyridylium compounds and its relevance to their adsorption by expanding lattice clays

Abstract

Charge distributions in 1, 1'‐ethylene‐2, 2'‐bipyridylium (diquat), 1,1'‐dimethyl‐4,4'‐bipyridylium (paraquat) and 1‐methylpyridinium organocations were calculated by a Complete Neglect of Differential Overlap semi‐empirical quantum mechanical procedure. The data show that the positive charges in the organocations are distributed around the molecules and are greatest in the positions ortho and para to the heterocyclic nitrogen atoms. Earlier interpretations of the mechanisms of adsorption of paraquat and diquat by soils and clays assumed that the charges were located in the heterocyclic nitrogen atoms. Here some consideration is given to the influence of the charge delocalizations on the processes of adsorption by montmorillonite and vermiculite clay preparations.     

基于排队论的城市垃圾箱最佳间距研究

针对城市垃圾箱最佳间距的研究不够精细的现状,本文通过建立排队论模型得到了可供不同城市参考的城市垃圾箱最佳间距参数表。通过对部分城市街道的垃圾箱摆放间距情况进行实地调查,运用层次分析法将影响垃圾箱间距分布的多重因素转化为单因素;建立了基于指数分布的数学模型,利用排队论分析单因素状态下的垃圾箱间距分布,得到了求解城市垃圾箱最佳间距的一般方法。     

Is Urban Stream Restoration Worth It?1

Kenney, Melissa A., Peter R. Wilcock, Benjamin F. Hobbs, Nicholas E. Flores, and Daniela C. Martínez, 2012. Is Urban Stream Restoration Worth It? Journal of the American Water Resources Association (JAWRA) 48(3): 603-615. DOI: 10.1111/j.1752-1688.2011.00635.x Abstract: Public investment in urban stream restoration is growing, yet little has been done to quantify whether its benefits outweigh its cost. The most common drivers of urban stream projects are water quality improvement and infrastructure protection, although recreational and aesthetic benefits are often important community goals. We use standard economic methods to show that these contributions of restoration can be quantified and compared to costs. The approach is demonstrated with a case study in Baltimore, Maryland, a city with a legal mandate to reduce its pollutant load. Typical urban stream restoration costs of US$500-1,200 per foot are larger than the cost of the least expensive alternatives for management of nitrogen loads from stormwater (here, detention ponds, equivalent to $30-120 per foot of restored stream) and for protecting infrastructure (rip-rap armoring of streambanks, at $0-120 per foot). However, the higher costs of stream restoration can in some cases be justified by its aesthetic and recreational benefits, valued using a contingent valuation survey at $560-1,100 per foot. We do not intend to provide a definitive answer regarding the worth of stream restoration, but demonstrate that questions of worth can be asked and answered. Broader application of economic analysis would provide a defensible basis for understanding restoration benefits and for making restoration decisions.     

Laboratory studies on formation and minimisation of polychlorinated dibenzodioxins and -furans (PCDD/F) in secondary aluminium process

The objectives of this work were to study the formation mechanisms of polychlorinated dibenzo-p-dioxins/polychlorinated dibenzofurans (PCDD/F) in thermal aluminium recycling processes by use of laboratory experiments. The pattern of isomers of PCDD/F indicates that de novo synthesis is important in aluminium smeltery. The mechanisms of PCDD/F formation in aluminium smelting are similar to that of various incineration processes of waste material. The results of bioanalysis (EROD-test) confirms the existence of de novo synthesis of PCDD/F, but points out to the existence to some additional, toxic compounds of unknown structure. To reduce the amount of PCDD/F the input of carbon at the metal should be reduced; in addition the metal smeltery plants should be cleaned from fly ash particles. It is suggested to use good primary methods in the technical plants like constant feeding of the metal into the oven will minimise PCDD/F concentration. The biological EROD-bioassay is a good tool to estimate PCDD/F-TEQ values also for this technical process simulated in the laboratory.