The main anammox-based processes,the involved microbes and the novel process concept from the application perspective

• The PNA, denitratation/anammox, and DAMO/anammox process are reviewed together. • Denitratation/anammox-based process is promising in mainstream treatment. • DAMO and denitratation processes realize the higher nitrogen removal efficiency. • The utilization of metabolism diversity of functional microbe is worth exploring. • An effective waste treatment system concept is proposed. Anammox technology has been widely researched over the past 40-year from the laboratory-scale to full-scale. It is well-known that in actual applications, the solo application of anammox is not feasible. Since both ammonium and nitrite are prerequisites based on the reaction mechanism, the pre-treatment of wastewater is necessary. With the combination of anammox process and other pre-treatment processes to treat the actual wastewater, many types of anammox-based processes have been developed with distinct nitrogen removal performance. Thus, in order to heighten the awareness of researchers to the developments and accelerate the application of these processes to the treatment of actual wastewater, the main anammox-based processes are reviewed in this paper. It includes the partial nitritation/anammox process, the denitratation/anammox (PD/A) process, the denitrifying anaerobic methane oxidation/anammox (DAMO/A) process, and more complex deuterogenic processes. These processes have made the breakthroughs in the application of the anammox technology, such as the combination of nitrification and PD/A process can achieve stability and reliability of nitrogen removal in the treatment of mainstream wastewater, the PD/A process and the DAMO/A have brought about further improvements in the total nitrogen removal efficiency of wastewater. The diversity of functional microbe characteristics under the specific condition indicate the wide application potential of anammox-based processes, and further exploration is necessary. A whole waste treatment system concept is proposed through the effective allocation of above mentioned processes, with the maximum recovery of energy and resources, and minimal environmental impact.     

低浓度下冲击负荷对厌氧折流板反应器的影响

采用一个9.9L的厌氧折流板反应器处理低浓度废水(500mgCOD/L左右),研究了有机冲击负荷、水力冲击负荷对反应器运行性能的影响。结果表明,ABR具有极好的抗冲击负荷的能力,在350%的水力冲击负荷、持续时间2.5h下仅需4h即可恢复原状。ABR受有机冲击负荷的影响较复杂,在50%和100%浓度的有机冲击负荷下,反应器约经8h恢复原来的水平。在低浓度废水的定义范围之内(COD<1000mg/L),进水COD浓度突然上升等有机冲击负荷不会损害ABR反应器的处理性能,相反可有一定的改善作用。ABR反应器的多隔室结构使之存在缓冲区等分区现象,从而提供了良好的抗冲击负荷的能力。     

复合式厌氧污泥床反应器处理城市生活污水的研究

复合式厌氧污泥床反应器是一种改进的厌氧处理工艺，可有效去除城市生活污水中的污染物，并提高了污水的可生化性，是一种较为理想的城市污水强化一级处理工艺。本文对该工艺，装置的特点和效果进行分析,并展望其应用前景。     

上流式厌氧污泥床反应器处理3-硝基酚废水研究

利用实验室规模的UASB反应器,研究了颗粒污泥驯化前后的特性,3-硝基酚(3-NP)的降解效果和UASB处理3-NP废水的工艺参数.结果表明,驯化过程中颗粒污泥很快适应3-NP废水;扫描电镜观察显示,颗粒污泥表面丝状菌占优势.在3-NP废水厌氧降解性实验中,保持HRT和进水COD浓度不变,分别为26 h和2 500 mg/L左右,当3-NP浓度由20 mg/L逐渐提高到250 mg/L时,COD去除率由95.2%下降到85.1%;3-NP的去除率保持在99%以上;3-AP是3-NP降解过程中的主要中间产物,3-NP转化为3-AP的转化率由58.7%上升到111.9%;产气量变化较小,甲烷占总产气量百分数最小为65%,最大为74%.     

Decolorization of triphenylmethane dye-bath effluent in an integrated two-stage anaerobic reactor

In the present study, decolorization of a simulated dye waste containing three different triphenylmethane (TPM) dyes--Magenta, Malachite Green and Crystal Violet, was investigated in a laboratory scale, two-stage anaerobic high-rate reactor. The effect of various parameters (influent dye concentration, hydraulic and co-substrate loading rates) on color and COD removal efficiency of the reactor has been studied. It has been shown that the influent dye concentration had little effect on overall COD and color removal efficiency. More than 99% color removal and 96% COD removal efficiency were maintained even at a dye concentration of 500 mg/l and a dye loading rate of 1000 mg/l day. However, a minimum level of glucose as supplementary carbon source is required to maintain the maximum color removal efficiency and it drops appreciably when no glucose is added to the influent. The study also showed that the acidogenic phase of the reaction plays an important role in decolorization of the TPM dyes. In addition, the two-stage anaerobic reactor was observed to have distinct advantages over the single-stage system, as the drop in color and COD removal efficiency of stage 1 are adequately compensated by stage 2 of the reactor especially under high dye loading rates accompanied by low co-substrate loading and under reduced HRTs.     

Effects of nature organic matters and hydrated metal oxides on the anaerobic degradation of lindane,p,p''''-DDT and HCB in sediments

IntroductionLindane ,p,p’ DDTandHCBaresemivolatileandlipophilic ,andtheyfallintotheclassofcompoundsdescribedaspersistentorganicpollutants.Moreover,thesecompoundshavebeenidentifiedaspotentendocrinedisrupters(Smith ,2 0 0 2 ;Willett,1 998;Robert,2 0 0 1 ) .Ithasbeenreportedchlorinatedorganiccompoundscanbedecomposedveryslowlyinsedimentsthroughvariousreactions(Niesl,1 990 ) .Factorsinfluencingthebiodegradationofcompoundsarevarious.Amongthem ,itwasreportedthattheeffectsofnaturalorganicmatters…     

水力停留时间对复合式厌氧折流板反应器乙醇型发酵制氢系统的影响

水力停留时间(HRT)是厌氧生物制氢工艺的重要工程参数.以红糖废水为底物,研究了HRT对复合式厌氧折流板反应器(HABR)作为乙醇型发酵制氢系统产氢效能的影响.结果表明,在设定的8~36 h范围内的5个HRT中,当HRT为12 h时,HABR制氢系统的效果最佳,产氢速率为13.86 mmol·(h·L)-1,COD去除率为51.51%,五格室的pH值在4.22~4.47之间,液相主要产物为乙醇和乙酸,第1~5格室乙醇和乙酸的比值分别为1.90、1.94、1.80、1.77、1.91,最佳能量生产为11.11 kJ·(h·L)-1.     

高温厌氧消化中底物浓度对病原指示微生物杀灭的影响

剩余污泥中含有大量病原微生物,土地利用之前必须进行适当的处理,降低病原微生物的数量,以降低环境风险.通过研究在不同的底物浓度条件下,剩余污泥高温厌氧消化(55℃)过程对病原指示微生物的杀灭效果,分析厌氧消化前后污泥中病原指示微生物数量变化的原因.结果表明,随着底物浓度的增加,VFAs浓度和累积产甲烷量增加.在底物浓度为28~84 g·L-1、温度为55℃、持续28 d的高温厌氧消化过程中,上清液中总大肠杆菌下降2.0~3.0个数量级、粪大肠杆菌下降1.8~3.3个数量级;消化后污泥中总大肠杆菌和粪大肠杆菌杀灭率均达到99%以上;且上清液中和消化污泥中均未检测到沙门氏菌的存在.在研究底物浓度范围内,当底物浓度大于45 g·L-1时,消化液和污泥中总大肠杆菌和粪大肠杆菌的杀灭效果下降.     

针铁矿对城市生活垃圾有机组分厌氧发酵的影响

利用PVC管构建厌氧发酵反应器,研究了铁氧化物对有机垃圾厌氧发酵过程中产气及垃圾渗滤液特性的影响.结果表明,添加针铁矿能够促进垃圾的水解酸化效率和产气速率,提高产气量至163.4 L,较空白提高了20%.通过对厌氧消化中间产物Fe2+、NH+4-N、NO-3-N、COD以及有机酸的分析表明,铁氧化物的存在有利于降低系统氧化还原电位,有助于提高厌氧微生物的水解酸化效率;铁氧化物的加入能够促进有机酸的转化,从而降低有机酸对厌氧微生物的抑制作用.     

“热水解-高温厌氧消化”工艺处理高含固率剩余污泥的中试研究

采取热水解(70℃)-高温厌氧消化工艺处理高固含率(8%~9%)的剩余污泥(中试).该工艺利用SRT为3 d的热水解促进细胞溶解以及高温厌氧消化加快污泥消化速率,有机物去除能力较强,并获得了较好的污泥稳定化效果.当厌氧消化的SRT在20 d以上时,总VSS去除率达到42.22%以上,且VSS去除率与厌氧消化的SRT呈线性正相关,相关系数达到0.915 3.在实际应用中,推荐高温厌氧消化的SRT为25 d.当停留时间接近时,本工艺与运行良好的传统污泥厌氧消化工程(含固率3%~5%)以及采用德国技术的高固消化工程的有机物去除率和甲烷产率相当.