膜生物反应器处理印染废水技术研究

采用小试规模(148L/d)的厌氧-好氧膜生物反应器处理印染废水.当水力停留时间为14小时,进水COD、色度分别为208.54～2592.00mg/l、32～256倍,通过水解酸化-体式膜生物反应器试验,系统对COD、色度的去除率分别达到了80%～90%、87.5%.出水水质浓度或指标分别为21.80～363.20mg/l、8倍,具有良好的处理效果.厌氧-好氧膜生物反应器工艺处理印染废水技术可行、操作简单、易于管理、可为工业规模应用提供技术参考.     

Climate Change and Energy Technologies

The long time scale of the climate change problem and the inherent nature of the carbon cycle bring important implications for present technology development efforts. Even if major technology improvements are achieved for non-carbon-emitting technologies such as energy-intensity improvements, wind, solar, biomass, and nuclear over the course of the 21^st century, most examinations of potential future greenhouse emissions conclude that additional technology development will be required to stabilize greenhouse gas concentrations. The evelopment of an expanded suite of technologies including carbon capture and disposal, hydrogen systems and biotechnology hold the potential to dramatically reduce the cost of stabilizing greenhouse gas concentrations. This paper examines these technologies in the context of a global integrated assessment model of energy, agriculture, land-use, economics, and carbon cycle processes.     

推行清洁生产实现可持续发展

对集团公司全面开展清洁生产的情况做了综述和总结，几年来的清洁生产实践表明，清洁生产促进了石化企业的发展，同时降低了废物排放，取得了明显的成果。清洁生产是保护环境的有力手段，也是实施可持续发展战略的重要措施     

湿法稀土清洁生产工艺研究

对某稀土湿法冶炼工艺进行了清洁生产主案研究，结果表明，精矿ＲＥＯ浸取率由９０％提高到９７％，从酸浸废液中年回收硫酸亚铁３０００ｔ；从碱转废液中年回收硫酸钠３０００ｔ；废吕中氟回收率８６％；生产废话水排放量削减５８％，废水污泥量削减９０％；经济效益年２００万元以上。     

超深厌氧塘的技术特性

超深厌氧塘是一种稳定塘新工艺。与常规厌氧塘相比，具有ＢＯＤ５容积负荷大、占地面积小，受温度影响小的优点。探讨了它的工作机理，本研究确定了负荷、水深和去除率之间的定量关系以供实际应用。     

降解五氯酚厌氧生物反应器微生物种群结构的分子特性研究

采用PCR—DGGE技术，对降解PCP厌氧生物反应器污泥颗粒化过程微生物种群结构的时空分布变化特性进行了初步研究．结果表明，随着PCP负荷增加与污泥的颗粒化，污泥真细菌、古细菌组成均发生明显变化．当反应器稳定运行时，反应器内上下层污泥微生物种群结构组成相似，真细菌相似性Cs在71．4～77．6之间，古细菌Cs在70．4～76．7之间．反应器一旦受污染物负荷冲击干扰，反应器上下层污泥真细菌组成相似性Cs降至43．3，古细菌降至35．2．测序表明，颗粒污泥中存在不可培养的脱氯细菌，优势产甲烷细菌为Methanosaeta concilii、Methanobacterium sp．、Methanobrevibacter sp．和Methanothfix soehngenii．     

厌氧--好氧--硅藻土处理屠宰废水工程实例

采用厌氧—好氧—硅藻土法处理屠宰废水 ,经过一段时间运行表明 ,处理效果稳定 ,进水CODcrll0 0 0mg/L左右 ,出水在 12 0mg/L以下。本文总结了设计施工过程中一些经验教训     

Analysis of the hydrocyclone stock cleaning process for wasted fibre in a paper mill

The main objective of this project was to evaluate the possibility of reducing the quantity of fibre wasted at one of many hydrocyclone (centrifugal) cleaning processes in a paper mill. It was found that the application of elutriation water to both the tertiary and quaternary cleaners was essential to minimise the fibre discharged to the sewer, and the pressure of this elutriation water had a dramatic effect of reducing the fibre wastage. Accordingly, it has been shown that 150–160 kPa as the optimum pressure range to apply elutriation water to minimise the product grade fibre wasted whilst sending undesired shive fibre to the sewer. Also, monitoring of the press uhle box wastewater revealed that the paper mill has the potential to make substantial cost savings by reducing the waste stream. Further investigation is necessary to determine the types of fibre that are being wasted, and the viability of a screen to recycle the wasted fibre to the process. However, these fibres may be unsuitable to reuse in the process and alternative uses must be found.     

厌氧-好氧处理羊绒印染废水

采用厌氧 -好氧联合工艺处理羊绒印染废水 ,经实际运行表明 ,在进水 CODcr浓度为 80 0～ 2 0 0 0 m g/L情况下 ,厌氧去除效率稳定在 5 0 %左右 ,好氧去除效率大于 80 % ;该工艺管理方便 ,处理出水稳定 ,运行费用低     

造纸行业的清洁生产示范

文章概述了我国造纸行业清洁生产示范项目审计的成果，从环境、经济及清洁生产方案类型等角度对企业推行清洁生产进行了初步分析，提出了存在的主要问题，并就进一步推动造纸行业的清洁生产提出了建议。