进口与国产COD消解测定仪测定废水COD的比对研究

应用消解分光光度法,比对了一款进口仪器和一款国产仪器应用于实际水样中COD含量测定的差异性。通过精密度、回收率、方法比对等实验分析得出,2款仪器应用电热消解分光光度法测定COD,实验结果与国标回流滴定法的实验结果基本一致,无显著性差异,具有可比性,可广泛用于水质评价和环境监测。与国产仪器相比,进口测定仪具有较小的偏差,较高的回收率。国产测定仪偏差较大的原因主要在于其比色装置,而不是用于前处理的消解装置。比较分析了2款仪器的购买和使用经济成本,为广大企事业及科研单位选用COD消解测定仪提供了有价值的基础数据和参考建议。     

黄河甘宁蒙段表层沉积物中总磷3种提取方法的比较

通过微波消解法、标准测试方法(SMT)和碱熔法分别测定了水系沉积物成分分析标准物质GBW07307a(GSD-7a)中的总磷(TP)含量,并分别采用3种方法对采集于黄河流域甘宁蒙段表层沉积物样品进行TP含量和样品加标回收率的测定。结果表明:测定标准物质的相对误差绝对值:微波消解法碱熔法SMT法;变异系数:微波消解法碱熔法SMT法。同时,微波消解法提取的表层沉积物TP含量的范围为634.3~909.2μg/g;SMT法TP含量的范围为627.1~889.5μg/g;碱熔法TP含量的范围为559.1~784.8μg/g。微波消解法的测定结果相对偏高,SMT法的测定结果相对偏低。样品加标回收率平均值:微波消解法SMT法碱熔法;变异系数:微波消解法碱熔法SMT法。综合测定标准物质中TP含量以及样品加标回收率实验结果的准确度和精密度,对于黄河甘宁蒙段表层沉积物,使用SMT法提取TP较优于微波消解法和碱熔法。     

过氯乙烯滤膜采样-酸消解-钼蓝光度法测定磷酸雾

建立了过氯乙烯滤膜采样 -酸消解 -钼蓝分光光度法测定磷化车间磷酸雾的监测方法。实验室模拟采样的捕集效率为 95 7%～ 99 1 %。单个实验室对含 5μg和 1 5μg样品进行多次测定 ,其相对标准差小于 5% ,样品加标回收率为 98 2 %～ 1 0 0 5% ,方法检测限为 0 0 0 7mg/m3。对标样测定 ,结果均在给定值范围内。用该法与等离子发射光谱法(ICP)对 5个样品进行比对测定 ,结果均令人满意。     

Treatment of digestate from a co-digestion biogas plant by means of vacuum evaporation: Tests for process optimization and environmental sustainability

Vacuum evaporation consists in the boiling of a liquid substrate at negative pressure, at a temperature lower than typical boiling temperature at atmospheric conditions. Condensed vapor represents the so called condensate, while the remaining substrate represents the concentrate.This technology is derived from other sectors and is mainly dedicated to the recovery of chemicals from industrial by-products, while it has not been widely implemented yet in the field of agricultural digestate treatment. The present paper relates on experimental tests performed in pilot-scale vacuum evaporation plants (0.100 and 0.025 m³), treating filtered digestate (liquid fraction of digestate filtered by a screw-press separator). Digestate was produced by a 1 MW_e anaerobic digestion plant fed with swine manure, corn silage and other biomasses. Different system and process configurations were tested (single-stage and two-stage, with and without acidification) with the main objectives of assessing the technical feasibility and of optimizing process parameters for an eventual technology transfer to full scale systems.The inputs and outputs of the process were subject to characterization and mass and nutrients balances were determined.The vacuum evaporation process determined a relevant mass reduction of digestate.The single stage configuration determined the production of a concentrate, still in liquid phase, with a total solid (TS) mean concentration of 15.0%, representing, in terms of mass, 20.2% of the input; the remaining 79.8% was represented by condensate. The introduction of the second stage allowed to obtain a solid concentrate, characterized by a content of TS of 59.0% and representing 5.6% of initial mass.Nitrogen balance was influenced by digestate pH: in order to limit the stripping of ammonia and its transfer to condensate it was necessary to reduce the pH. At pH 5, 97.5% of total nitrogen remained in the concentrate. This product was characterized by very high concentrations of total Kjeldhal nitrogen (TKN), 55,000 mg/kg as average.Condensate, instead, represented 94.4% of input mass, containing 2.5% of TKN. This fraction could be discharged into surface water, after purification to meet the criteria imposed by Italian regulation. Most likely, condensate could be used as dilution water for digestion input, for cleaning floor and surfaces of animal housings or for crop irrigation.The research showed the great effectiveness of the vacuum evaporation process, especially in the two stage configuration with acidification. In fact, the concentration of nutrients in a small volume determines easier transportation and reduction of related management costs. In full scale plants energy consumption is estimated to be 5–8 kWh_e/m³ of digestate and 350 kWh_t/m³ of evaporated water.     

环境生物样品预处理中的微波溶样技术

微波溶样是近年产生的一种崭新的有前途的样品预处理技术，本文评述这一技术在环境、生物样品消解方面的近期应用。     

微波消解法测定农药废水中的总磷

介绍了一种测定农药废水中总磷的新的预处理方法－微波消解法。其消解时间从传统法的40min缩短到8min，精确度和准确度与传统的消解法相比无显著性差异。     

微波消解法快速测定渗滤液化学需氧量

针对国标回流法测定化学需氧量消耗时间长,分析费用高等不足,研究了微波消解法测定垃圾渗滤液的试验方法.通过微波消解功率、消解时间、催化剂用量等试验,确定了微波消解测定渗滤液CODCr的最佳条件.该方法具有省时间、省试剂、准确度高等优点.     

低温短时水热预处理混合及初沉污泥的高温厌氧消化特性研究

以低温短时(90℃、30 min)水热预处理后的混合及初沉污泥为研究对象,分别进行了高温((55±1)℃)厌氧消化连续性试验.研究了该预处理条件下这两类污泥在水力停留时间(HRT)为20 d时的产气量、有机物分解率及物料平衡等,探讨了低温短时水热预处理对提高污泥厌氧消化性能的效果.结果表明:TS约为35 g·L-1的预处理混合污泥与初沉污泥经高温厌氧消化后,投加单位VS的产气量分别为(343.00±9.86)m L·g-1和(365.00±7.61)m L·g-1,VS去除率分别为38.9%和45.8%.COD物料平衡计算结果表明,混合和初沉污泥中分别有33.6%和43.9%的固体有机物被分解转化,生物气中CH4含量均在70%左右.     

麦秆酸预处理后与猪粪混合发酵提高产气量的效应研究

为了研究不同水平的酸处理对麦秆混合发酵过程中各指标变化的影响,本试验通过测定不同醋酸浓度、时间处理后的麦秆与猪粪混合厌氧发酵进程中还原糖、挥发性脂肪酸(VFA)含量,以及p H值变化和甲烷产量,探究各指标的关系并优化得出最佳醋酸处理组合,以期为酸预处理混合发酵实现高甲烷产量提供可靠的理论依据.结果表明,醋酸处理后的麦秆通过与猪粪混合发酵可明显提高甲烷单位产量,增幅为124.28%~207.40%.发酵过程中还原糖、VFA、p H值间相互影响.通过响应面法建立模型,得到醋酸处理的最优组合为浓度3.35%、时间6.75d,最大甲烷单位产量751.97 m L·g-1(以VS计).     

四环素类抗生素和铜复合污染对猪粪厌氧消化的影响

兽用抗生素和矿物元素添加剂可起到预防动物疾病、促进动物生长、提高饲料转化率等作用,因此被广泛应用于畜禽养殖业。本研究以猪粪中温厌氧消化为研究目标,采用全自动甲烷潜势测试系统,考察了一定浓度的四环素(TC:30 mg·kg~(-1)dry weight,DW)、土霉素(OTC:50 mg·kg~(-1)DW)和金霉素(CTC:15 mg·kg~(-1)DW)对厌氧累积产甲烷量和日产甲烷速率的影响。结果表明,TC、OTC和CTC对猪粪中温厌氧消化累积产甲烷量和日产甲烷速率均有促进作用(累积产甲烷总量提高比例分别为7.9%、0.4%和5.4%)。另外,采用超高效液相色谱-四极杆串联质谱对猪粪厌氧消化前后样品中四环素类抗生素及其代谢产物进行了分析。结果表明,液相中的四环素类抗生素在猪粪厌氧消化过程中得到了明显的去除,去除率达到90%~100%;而固相中只有金霉素和差向异构金霉素有明显的去除效果,去除率分别为41.69%和41.58%。采用Tessier连续提取法对猪粪厌氧消化前后样品中5种形态的铜包括可交换态、碳酸盐结合态、铁锰氧化结合态、有机物结合态、残渣态进行了分析,结果表明,猪粪厌氧消化后,可交换态、碳酸盐结合态和铁锰结合态的铜浓度比厌氧消化前分别降低了1%~9%、0.1%~3%、12%~19%,而有机态和残渣态的铜浓度却在厌氧消化后分别增加了15%~35%、1%~2%。厌氧消化后,70%~80%的铜都是以有机铜的形态存在。铜逐渐从不稳定态转化为相对稳定的有机态和残渣态铜,因此,厌氧消化过程使铜从可生物利用态转变为不可生物利用态,趋于稳定化。