催化裂化钠碱脱硫液中钙镁离子的去除

研究了化学沉淀法和氨基膦酸型螯合树脂吸附法对催化裂化钠碱脱硫液中Ca~(2+)和Mg~(2+)的去除效果。实验结果表明:NaOH沉淀法可有效去除钠碱脱硫液中的Mg~(2+),当溶液pH为12、反应时间为15 min时,Mg~(2+)去除率达91.6%;NaOH-Na_2CO_3联合沉淀法无法去除钠碱脱硫液中的Ca~(2+);经过NaOH溶液有效除Mg~(2+)后的脱硫液再采用氨基膦酸型螯合树脂吸附柱去除其中的Ca~(2+)和Mg~(2+),可使出水硬度小于2 mg/L。提高进水pH、降低进水流量、降低进水硬度均可提高单位体积树脂的处理水量。     

改性壳聚糖处理微生物浸矿废水

为解决采矿行业微生物浸矿酸性废水中和处理沉渣多、固液分离困难的问题,采用柠檬酸钠和环氧氯丙烷改性处理的壳聚糖在pH=2.2条件下吸附模拟废水中的Cu²⁺和Fe³⁺,用正交实验优化了壳聚糖改性工艺条件。实验结果表明,最适宜的工艺条件为：处理100 mL壳聚糖质量分数为2%的壳聚糖-冰醋酸溶液,柠檬酸钠缓冲溶液加入量200 mL,环氧氯丙烷加入量300 mL,反应时间6 h。改性壳聚糖对Fe³⁺的最大吸附容量为6.703 7 mg/g,对Cu²⁺的最大吸附容量为4.378 7 mg/g,Fe³⁺和Cu²⁺在改性壳聚糖上的吸附是单分子层形式。     

土壤中全氮分析方法的研究进展

土壤中的氮是衡量土壤肥力的主要指标之一。基于对国内外文献的调研,系统地归纳了现阶段土壤中全氮分析方法(凯氏法、红外光谱技术、杜马斯燃烧法)的原理和应用。对不同的测定方法进行比较,总结不同分析方法的优缺点。提出自动化分析、高灵敏度、高准确度、低成本、便捷的检测技术是土壤中全氮分析的重要发展方向。     

Dynamic simulation and performance prediction of free displacer Stirling engines

ABSTRACT

In this study, a Stirling engine with a free-displacer and a kinematically controlled power piston was proposed and analyzed from thermodynamic and dynamic points of view. The analysis intended to reveal the dynamic behaviors of moving components of the engine as well as predicting global thermal performance of it. A dynamic-thermodynamic mathematical model of the engine involving the isothermal gas pressure equation and motion equations of the displacer, power piston and crankshaft was developed. For the solution of the dynamic-thermodynamic model equations, and simulation of the engine’s running, a computer program was prepared in FORTRAN language. By considering a hot-end temperature of 1,000 K and a cold-end temperature of 350 K, dimensions of mechanic, volumetric and thermal components of the engine were quantified interactively. Variations of engine speed, engine power, displacer stroke, and engine torque were examined with respect to the spring constant, displacer mass, displacer damping constant and external load and, results were graphically presented. In comparison with engines having free-piston and kinematically driven displacer, the thermodynamic performance of the free-displacer engine was found to be lower. The engine was found to be able to work at constant speed and power. The values of the displacer mass and spring constant were optimized as 1,500 g and 1,30,000 N/s, respectively and the global speed of the engine was determined to be 47.75 Hz for these values. The effective and the indicated work of the engine were determined to be 113 and 126 J, respectively.     

A two-dimensional analytical model of PEMFC with dead-ended anode

ABSTRACT

When the proton exchange membrane fuel cell (PEMFC) works in the mode of dead-ended anode (DA), the water and the nitrogen in the cathode flow channel will diffuse, and accumulate, to the anode flow channel resulting in fuel starvation on the anode side as well as the performance degradation of PEMFC, which has an important impact on the durability and working state of PEMFC. Because the PEMFC performance is closely related to the cathode working parameters, in order to study the influence of the cathode working parameters on the performance of the PEMFC with DA, a two-dimensional analytical model of PEMFC with DA is established in this article, and the parameters in the model are corrected by experiments. The effects of humidity, stoichiometric ratio and working pressure of cathode gas on the performance of PEMFC with DA are studied by model and experiment, as well as the effects of these working parameters on the accumulation process and distribution of water vapor and nitrogen on the anode side, and the relative performance of PEMFC with DA under different cathode working parameters is obtained. This model is of great significance to guide the practical work of the PEMFC with DA.     

基于环境监测的矿井通风三维仿真辅助决策系统设计

为优化金属矿山矿井通风系统及辅助决策设计,弥补常用矿井通风仿真解算软件在环境监测、实时解算和辅助决策方面的不足,基于矿井通风理论、环境监测、计算机与通信技术开发矿井通风三维仿真辅助决策系统。提出通过利用实时监测到的井下通风环境参数（风量、风速等）和已存储在系统数据库里的巷道参数,实现对矿井通风网络实时解算,并将其应用到山金阿尔哈达矿井通风系统中。结果表明:矿井通风三维仿真辅助决策系统同步实现了山金阿尔哈达矿井通风系统的环境监测、风网实时解算和三维仿真模拟,提高了其矿井通风管理水平,为矿井通风系统改造优化设计和矿井向深部中段延伸时的通风系统设计提供辅助决策依据。     

Incorporating inherent safety during the conceptual process design stage: A literature review

This paper reviews principal concepts, tools, and metrics for risk management and Inherently Safer Design (ISD) during the conceptual stage of process design. Even though there has been a profusion of papers regarding ISD, the targeted audience has typically been safety engineers, not process engineers. Thus, the goal of this paper is to enable process engineers to use all the available design degrees of freedom to mitigate risk early enough in the design process. Mainly, this paper analyzes ISD and inherent safety assessment tools (ISATs) from the perspective of inclusion in conceptual process design. The paper also highlights the need to consider safety as a major component of process sustainability. In this paper, 73 ISATs were selected, and these tools were categorized into three groups: hazard-based inherent safety assessment tools (H-ISATs) for 22 tools, risk-based inherent safety assessment tools (R-ISATs) for 33 tools, and cost-optimal inherent safety assessment tools (CO-ISATs) for 18 tools. This paper also introduces an integrated framework for coordinating the conventional process design workflow with safety analysis at various levels of detail.     

MAP法处理饲料级磷酸氢钙母液的研究

运用 MAP(磷酸铵镁)法处理高浓度饲料级磷酸氢钙母液,研究了处理的最优反应条件并分析了最优条件下所得产物成分.结果表明,母液处理的最优反应条件为pH=9.5,n(NH4 ):n(PO43-)=1:1,反应时间 10 min,反应温度40℃以下.该条件下,当温度为40℃时,PO43-、Mg2 和Ca2 的去除率分别达到 98.46%、92.54%和98.48%,残留浓度分别为 15.91、70.25 和2.94 me/L.生成的沉淀产物中 P2O5、NH4 -N、CaO 和MgO 所占重量百分比分别为29.08%、6.07%、2.83%和 15.91%,所含 MAP 可作为肥料回收利用.     

有机/无机缓蚀剂在模拟混凝土孔隙液中对钢筋缓蚀作用对比研究

目的 检测和评价五种有机/无机缓蚀剂在含3.5％NaCl的模拟混凝土孔隙液(SCP)中对Q235碳钢的缓蚀效果.方法 采用动电位极化曲线和电化学交流阻抗谱(EIS)测试方法 .结果 综合评价后可知,0.0015 mol/L的D-葡萄糖酸钠具有最好的缓蚀效果,浸泡30 d后的Rct可达到282.74×104?·cm2,此...     

过硫酸钾溶液对测定总氮的影响

通过对过硫酸钾的配制方法,加热时的水浴温度,反应介质条件及其纯度等因素对总氮测定结果影响的讨论,提出了过硫酸钾有效的配制方法及其纯度要求,以进一步提高总氮测定的准确度.