Postfire Seeding for Erosion Control: Effectiveness and Impacts on Native Plant Communities

Abstract:  Large, high-severity wildfires remove vegetation cover and expose mineral soil, ofen causing erosion and runoff during postfire rain events to increase dramatically. Land-management agencies in the United States are required to assess site conditions after wildfire and, where necessary, implement emergency watershed rehabilitation measures to help stabilize soil; control movement of water, sediment, and debris; prevent permanent impairment of ecosystem structure and function; and mitigate significant threats to human health, safety, life, property, or downstream values. One of the most common postfire treatments is broadcast seeding of grasses, usually from aircraft. Non-native annual or perennial grasses typically are used to provide quick, temporary ground cover to hold soil in place until native plants are reestablished. Critics argue that seeded grasses compete with native vegetation and do not effectively reduce erosion. Few data exist on the effectiveness of erosion control; less than half of the studies I reviewed showed reduced sediment movement with seeding. In all vegetation types, successful growth of seeded grasses—enough to affect erosion—appears to displace native or naturalized species, including shrub and tree seedlings. Due to the competitiveness of seeded grasses, they are used to attempt suppression of noxious weeds in some postfire seeding operations. In burned sagebrush range, postfire seeding is frequently used to replace non-native cheatgrass (  Bromus tectorum ) with native or introduced bunchgrasses, with at least short-term success. In recent years, native species and sterile cereal grains have increasingly been used for seeding. Use of aerially applied straw mulch has increased as well, with the risk of weed introduction from contaminated bales. More research on the effectiveness and ecosystem impacts of these alternatives is needed.     

Mass balance modeling of arsenic processes in cropland soils

This study delineated the mathematical forms for the reactions involved in the mass balance of As in cropland soils. Even mathematically simplified, many model parameters are required to define the reactive processes involved. Example simulations were conducted based on the range of parameter values and initial conditions derived from published literature. The outcomes showed that the As inputs due to fertilizers and irrigation water caused total As content of the root zone to gradually increase over time. The plant uptake and leaching were equally important as pathways for removal of the added As. In turn, the dissolution kinetics of the mineral phase and the distribution coefficient of the adsorbed phase affected the availability of the As for plant uptake and leaching. Parameters based on laboratory-derived data on the dissolution of As mineral phase, mineralization and oxidation of As(III), and the As plant uptake however appeared to overestimate the As transformations in soils. While the development of mathematical model was a straightforward process, its application to realistic situations was hindered by difficulties of defining model parameter values with confidence. Current knowledge on the processes and reactions of As transformation in the soil–plant system is inadequate to calibrate or validate the model. Studies are needed to understand the kinetics of soil As mineral dissolution and precipitation and the dynamics of root growth and As uptake by plant in soils.     

丽水小盆地型城市酸雨现状及成因分析

根据浙江省丽水市 1 986— 2 0 0 2年酸雨监测数据 ,对该市酸雨污染的现状特征及成因进行了分析。结果表明 ,丽水市酸雨污染严重 ,并呈逐年加重的趋势。冬、春季酸雨率高 ,降水 pH值低 ;降水的主要离子SO42 -与NO-3比值逐年下降 ,说明大气污染有从煤烟型转为煤烟型与机动车尾气混合型的趋势 ;煤耗量、地型地貌特点、低空逆温层频率、地面弱风频率对酸雨率和降水 pH值有明显的影响。     

Bayesian analysis under ordered functions of parameters

Ordered parameter problems arise in a wide variety of real world situations and are dealt with extensively in the literature. Traditional frequentist methods for dealing with these problems are rather complicated theoretically, especially when sample sizes are small. Bayesian methods are not widely used because high dimensional numerical integration is often required. However, Markov chain Monte Carlo methods provide alternatives to such numerical integration and also deal with ordered parameter problems in a straightforward manner. Little is known about the situation where functions of parameters are ordered. Such problems may seem to be of little practical concern initially, but one can readily see their importance in situations where ordering is placed on the means and variances of several normal or Gamma populations. For the Gamma distribution we will present real examples where we will analyze monthly precipitation data from San Francisco, California and Oakland Mills, Iowa. For the San Francisco data we will simultaneously order both monthly precipitation means and variances. For the Iowa data we will place ordering on seasonal average while still estimating monthly means. Our results show that we would obtain sharper, more accurate inference when order restrictions are employed.     

冲天炉烟气除尘

采用湿法除尘,在烟气管道内设置喷嘴,使烟气充分加湿和降温后再进入立式文丘里,旋流析除尘器,消除了ＣＯ爆炸危险,在冲天炉上部烟囟顶端设安全２盖板,以保证生产的正常进行;烟气经湿式除尘后达到排放标准。     

VERIFICATION OF THE RHEA-OROGRAPHIC-PRECIPITATION MODEL1

ABSTRACT: Observed April 1 snowpack accumulations within and near the Gunnison River basin in southwestern Colorado are compared with simulations from the Rhea-orographic-precipitation model to determine if the model simulates reliable magnitudes and temporal and spatial variability in winter precipitation for the basin. Twenty simulations of the Rhea model were performed using‘optimal’parameter sets determined for 10-kilometer (km) grids (10-km by 10-km grid cells) through stochastic calibration. Comparisons of Rhea-model simulations of winter precipitation with April 1 snowpack accumulations at 32 snowcourse stations were performed for the years 1972–1990. For most stations and most years the Rhea model reliably simulates the temporal and spatial variability in April 1 snowpack accumulations. However, in general, the Rhea-model underestimates April 1 snowpack accumulations in the Gunnison River basin area, and the underestimation is greatest for locations that receive the largest amount of snow. A significant portion of the error in Rhea-model simulations is due to the calibration of the Rhea model using gauge-catch precipitation measurements which can be as much as 50 percent below actual snowfall accumulations. Additional error in the Rhea-model simulations is a result of the comparison of gridded precipitation values to observed values measured at points.     

Laboratory scale studies on removal of chromium from industrial wastes

Chromium being one of the major toxic pollutants is discharged from electroplating and chrome tanning processes and is also found in the effluents of dyes,paint pigments,manufacturing units etc.Chromium exists in aqueous systems in both trivalent(Cr^3 )and hexavalent (Cr^6 )forms.The hexavalent form is carcinogenic and toxic to aquatic life,whereas Cr^3 is however comparatively less toxic.This study was undertaken to investigate the total chromium removal from industial effluents by chemical means in order to achieve the Pakistan NEQS level of 1 mg/L by the methods of reduction and precipitation.The study was conducted in four phase Ⅰ,the optimum pH and cost effective reducing agent among the four popular commercial chemicals was selected.As a result,pH of 2 was found to be most suitable and sodium meta bisulfate was found to be the most cost effective reducing agent respectively.Phase Ⅱ showed that lower dose of sodium meta hisulfate was sufficient to obtain 100% efficiency in reducing Cr^6 to Cr^3 ,and it was noted that reaction time had no significance in the whole process.A design curve for reduction process was established which can act as a tool for treatment of industrial effluents.Phase Ⅲ studies indicated the best pH was 8.5 for precipitation of Cr^3 to chromium hydroxide by using lime.An efficiency of 100% was achievable and a settling time of 30 minutes produced clear effluent.Finally in Phase Ⅳ actual waste samples from chrome tanning and electroplating industries,when precipitated at pH of 12 gave 100% efficiency at a settling time of 30 minutes and confirmed that chemical means of reduction and precipitation is a feasible and viable solution for treating chromium wastes from industries.     

离心脉冲静电除尘模型的除尘性能实验研究

介绍了一种直筒式离心脉冲静电除尘器，研究了其除尘效率与入口风速，直流基础电压，入口粉尘浓度等操作因素的关系；测定了在不同入口风速，不同供电情况下除尘器的分级效率，结果表明，离心脉冲静电除尘器具有结构简单，阻力损失低，除尘效率高等优点；脉冲供电能显著提高除尘器的分级效率。对粒径小于2μm的粉尘的捕集，入口风速为6.97m/s至12.79m/s时，脉并非中供电与直流供电相比，其分级效率提高10%-23%；与旋风相比，其分级效率提高37%-66%。     

Influence of hydrogeochemical processes on zero-valent iron reactive barrier performance: a field investigation

Geochemical and mineralogical changes were evaluated at a field Fe0-PRB at the Oak Ridge Y-12 site concerning operation performance during the treatment of U in high NO3- groundwater. In the 5-year study period, the Fe0 remained reactive as shown in pore-water monitoring data, where increases in pH and the removal of certain ionic species persisted. However, coring revealed varying degrees of cementation. After 3.8-year treatment, porosity reduction of up to 41.7% was obtained from mineralogical analysis on core samples collected at the upgradient gravel-Fe0 interface. Elsewhere, Fe0 filings were loose with some cementation. Fe0 corrosion and pore volume reduction at this site are more severe due to the presence of NO3- at a high level. Tracer tests indicate that hydraulic performance deteriorated: the flow distribution was heterogeneous and under the influence of interfacial cementation a large portion of water was diverted around the Fe0 and transported outside the PRB. Based on the equilibrium reductions of NO3- and SO4(2-) by Fe0 and mineral precipitation, geochemical modeling predicted a maximum of 49% porosity loss for 5 years of operation. Additionally, modeling showed a spatial distribution of mineral precipitate volumes, with the maximum advancing from the interface toward downgradient with time. This study suggests that water quality monitoring, coupled with hydraulic monitoring and geochemical modeling, can provide a low-cost method for assessing PRB performance.     

废水除磷技术的研究与发展

目前 ,人们越来越重视污水除磷技术。本文介绍与评述了化学和生物两种除磷方式及其除磷机理和工艺 ,并着重介绍了生物除磷的现状、发展和研究动向