Pulse cleaning flow models and numerical computation of candle ceramic filters

ＩｎｔｒｏｄｕｃｔｉｏｎＣｌｅａｎｉｎｇｔｈｅｆｉｎｅｐａｒｔｉｃｌｅｓｉｎｈｉｇｈｔｅｍｐｅｒａｔｕｒｅ (450℃ -950℃ )ａｎｄｈｉｇｈｐｒｅｓｓｕｒｅｃｏｎｄｉｔｉｏｎｃａｎｅｎｈａｎｃｅｔｈｅｔｈｅｒｍａｌｅｆｆｉｃｉｅｎｃｙｏｆｃｌｅａｎｃｏａｌｔｅｃｈｎｏｌｏｇｉｅｓｓｕｃｈａｓＩＧＣＣｏｒＰＦＢＣ .Ｒｉｇｉｄｃｅｒａｍｉｃｆｉｌｔｅｒｓｏｆａｖａｒｉｅｔｙｏｆｓｔｒｕｃｔｕｒｅｓａｒｅｕｎｄｅｒｄｅｖｅｌｏｐｍｅｎｔｉｎｐｒｏｇｒａｍｓａｒｏｕｎｄｔｈｅｗｏｒｌｄ ,ｗｈｉｃｈｃａｎｆｉ…     

以最经济输水为原则 调整高压输水泵及工艺

简这了炼油厂更新高压输水泵，调整输水工艺、降低输水成本的方法。     

Intrauterine manometry: Technique and application to fetal pathology

A technique is described for measuring pressure within the amniotic cavity and within fetal vessels and/or body compartments. Two saline-filled catheters were connected at one end to needles inserted during indicated invasive procedures and at the other to silicon strain gauge transducers. In 36 pregnancies with normal liquor volume, stable intra-amniotic pressure (IAP, range 1–14 mmHg) increased with gestation (r=0·48, p<0·01). In pregnancies complicated by severe oligohydramnios, IAP was ≤ 1 mm Hg and rose to normal levels with saline amnioinfusion. Raised IAP (range 17–26 mm Hg), found in pregnancies with gross polyhydramnios, fell with drainage of amniotic fluid. Subtraction manometry was used to determine supra-amniotic pressure within the intervillus space, umbilical vein, umbilical artery, abdominal and thoracic cavities, and the urinary tract in normal and/or pathological fetuses. Low intravesical and intrapelvicalyceal pressures (median 6·5, range 2–10 mmHg) were noted in fetuses with obstructive uropathies. Intrauterine subtraction manometry appears to be a useful tool in the understanding of fetal pathophysiology and may be of clinical benefit in the therapeutic drainage and infusion of amniotic fluid and in the assessment of certain fetal disease states.     

基于风险的检验在高温高压管廊蒸汽管道的应用

高含硫天然气净化装置高温高压管廊蒸汽管道由于不能停车,在现有技术条件下无法开展全面检验,存在安全运行的风险。简述了基于风险的检验技术的基本理念。讨论了蒸汽管道开展基于风险的检验的合规性、损伤模式及机理、风险评估方法和程序。通过综合考虑失效可能性和失效后果,制定最优检验策略并实施,解决了高温高压管廊蒸汽管道到期不能检验的问题,及时发现隐患并整改,确保管道合法合规安全运行。研究结果表明,采用基于风险的检验技术,既能节约大量的停车和检验维修费用,又能有效地提高重点设备管线的安全性和管理水平。     

喷射溶气回流浮选工艺处理含油废水

采用喷射溶气回流浮选工艺处理含油废水，替代原来的全加压溶气浮选工艺，提高了浮选过程的处理效果，增强了系统的抗负荷冲击能力，浮选出水油含量由原来的〈４０ｍｇ／Ｌ降至〈２０ｍｇ／Ｌ，ＣＯＤ由原来的〈１５０ｍｇ／Ｌ降至〈１１０ｍｇ／Ｌ。     

王甫洲工程泄水闸围堰基础高喷防渗墙施工

王甫洲水利枢纽工程泄水闸施工围堰基础主要为砂卵石层，结构中密～密实，属较强～极强透水层。使用改制的ＢＺＫ—３Ａ 型喷灌机，大水量、大浆量、不分序连续施工，高压定喷构筑围堰基础防渗板墙。经围井开挖检查，钻孔及围井挖后抽水试验、泄水闸基坑开挖后的防渗效果分析表明，高喷防渗板墙厚度、墙体强度及墙体渗透系数均满足设计要求     

矿井井筒提升设备绕流的数值模拟

基于经典的流体力学理论,建立罐笼绕流的二维RNGκ-ε湍流模型,分析其初始边界条件,并结合工程实际应用FLUENT计算流体动力学软件模拟罐笼运行时井筒内流场及压力场,得出井筒内流场及压力场的变化规律。研究结果表明:在罐笼运行期间,由于空间受限而引发活塞效应,井筒内压力发生瞬态变化,造成通风系统的压力波动,导致气流运动的动态改变,对通风系统稳定性有一定的影响。     

特种胶塑复合管抗张强度计算

通过对特种胶塑复合管的抗张强度计算和生产实践，证明了矿用充填管路采用胶塑复合管是可行的。为矿用充填管以胶塑复合管替代铁管提供了依据。     

流体动力系统噪声控制研究

以泵为例分析了液压动力系统中噪声产生的机理和危害，结合多年来的生产经验，给出降低和控制液压动力系统噪声的思路和几种基本方法。     

长袋低压脉冲除尘器的创新与发展

依靠科技进步，应用多项专利技术，研制与开发的LFDM型长袋低压脉冲除尘器，成功应用于冶金、有色、建材、电力、机械和矿业等行业的工业气体除尘与净化；具有明显的达标排放和占地小、阻力低、投资省、运行费用少等特点。