铁炭复配修复地下水中NO_3~--N的条件研究

采用了铁炭复配修复地下水中NO3--N,探讨了实验条件对修复效果的影响。结果表明,在pH值近中性条件(初始pH 6.42)下,反应时间为1 h时NO3--N修复率达到60.85%;Fe/C=1∶1时介质最佳用量分别为4~5 g;Fe/C=1/1.5时修复率为72.80%;反应速率在高振荡强度下大于低振荡强度;氧化铜的催化效果最好,可使修复率提高7.5个百分点。铁炭复配介质修复地下水中NO3--N是有效可行的,修复率随反应时间的增加而提高,在Fe/C=1∶1时修复率与介质用量呈正相关,无限减小Fe/C比并不能无限提高修复率,振荡强度对修复具有显著影响,低振荡强度下的修复过程较高强度存在滞后现象,并非所有金属氧化物催化剂对铁炭修复NO3--N均有促进作用。     

烟草下脚料发酵制取乙醇

通过单因素实验考察了硫酸浓度、固液比和水解时间对硫酸水解的影响。结果显示最优条件为:硫酸浓度为50%(w/w),固液比为10%(w/v),时间为100 min。烟草下脚料在最佳硫酸水解条件下,经5倍稀释,中和pH值至5～6。取经过滤后的水解液(FH)用酿酒酵母(Sacchharomyces cerevisiae)发酵产生乙醇,最大的乙醇浓度和乙醇产量分别为1.09g/L和54.5 g/kg。未过滤水解液(UFH,包括水解残渣)加入纤维素酶(70 U/100 mL)和酿酒酵母(Sacchharomyces cerevisiae)进行发酵,最大的乙醇浓度和乙醇产量分别为1.23 g/L和61.5 g/kg。     

拜耳法赤泥粒径分级预处理的研究

赤泥是从铝土矿中提取氧化铝的过程中产生的工业废渣.分析了拜耳法赤泥的粒径分布,以及主要化学组成和矿物组成在不同粒径赤泥中的变化规律.在此基础上,提出先将赤泥粒径分级预处理,然后根据粗细粒径赤泥的差异分别进行回收利用的思路.研究结果表明,赤泥中粒径大于0.075 mm的粗颗粒以铁、硅、钙为主,实践证明可以通过磁选或重选工...     

纳米氧化物对钙基材料在高温燃煤中除砷脱硫的促进机理研究

将纳米MgO、Al2O3和ZnO分别添加于CaCO3中制备出钙基纳米氧化物复合吸附剂,进行了燃煤过程中除砷脱硫的实验研究;对燃煤灰渣进行了比表面积及孔隙度分析、X-射线衍射分析和扫描电镜观察,探讨了纳米MgO对CaCO3除砷脱硫的促进机理。结果表明,添加了纳米MgO的复合吸附剂除砷脱硫性能最好,比单一的CaCO3除砷率和脱硫率分别高出了28．73％和37．21％,表现出同时除砷脱硫的良好性能;其促进机理是纳米MgO的加入改变了灰样的微观结构促进了气相间的流动使得灰渣孔隙明显扩大,提高了CaO与As2O3和SO2反应的能力;在除砷的反应中生成了新的物质Ca3Mg2（AsO4）2,在一定程度上抑制了除砷产物的分解。     

Recycling of organic materials and solder from waste printed circuit boards by vacuum pyrolysis-centrifugation coupling technology

Here, we focused on the recycling of waste printed circuit boards (WPCBs) using vacuum pyrolysis-centrifugation coupling technology (VPCT) aiming to obtain valuable feedstock and resolve environmental pollution. The two types of WPCBs were pyrolysed at 600°C for 30 min under vacuum condition. During the pyrolysis process, the solder of WPCBs was separated and recovered when the temperature range was 400-600°C, and the rotating drum was rotated at 1000 rpm for 10 min. The type-A of WPCBs pyrolysed to form an average of 67.91 wt.% residue, 27.84 wt.% oil, and 4.25 wt.% gas; and pyrolysis of the type-B of WPCBs led to an average mass balance of 72.22 wt.% residue, 21.57 wt.% oil, and 6.21 wt.% gas. The GC-MS and FT-IR analyses showed that the two pyrolysis oils consisted mainly of phenols and substituted phenols. The pyrolysis oil can be used for fuel or chemical feedstock for further processing. The recovered solder can be recycled directly and it can also be a good resource of lead and tin for refining. The pyrolysis residues contained various metals, glass fibers and other inorganic materials, which could be recovered after further treatment. The pyrolysis gases consisted mainly of CO, CO(2), CH(4), and H(2), which could be collected and recycled.     

有机化纳米粘土基絮凝吸附材料对马铃薯淀粉加工废水的资源化处理

采用物理化学提纯方法制备了有机化纳米粘土基絮凝吸附材料,经过以聚乙二醇2000(PEG-2000)、十六烷基三甲基溴化氨(CTAB)、四丁基氢氧化铵(TBAOH,质量分数25％)和溴化四苯基磷(TPPB)4种表面活性剂对絮凝吸附材料进行有机化修饰,并将其应用于马铃薯淀粉加工废水的资源化处理.实验结果表明,有机化纳米粘土...     

小口径弹用密封材料贮存寿命预测

采用美国军用手册，ASTM的方法和数据，以最少的试验和费用，快速地预测硅橡胶贮存寿命。预测结果可以作为评估该弹用密封材料自然长贮寿命的依据。     

Biomethanation of plant materials and agricultural residues using dung samples as wild population of microbes and also with isolated methanogens

Recycling of plant materials and agricultural residues for biomethanation was attempted in vials. The methanogenic activities of certain sewage samples have also been tested. Both sterilized and non-sterilized biomasses were used. Biomethanation was carried out with dung samples (cow, goat, buffalo, piggery wastes and poultry wash) as wild populations of microbes and in combination with other microbial isolates (isolated in the laboratory).Biomethanation had been observed to be good in most cases and particularly with the sterilized biomass. Mixed inoculum (dung samples and poultry wash) was found to be best for biomethanation. Of the microbe isolates, isolates from buffalo, pig and paper mill wastes appear to be most effective. Pretreated sawdust and rice straw were found to be good subtrates for biomethanation. Of the different plant biomass used Spirogyra (algae), Ipomea and water hyacinth were most effective whereas Jatropa gossypifolia and Parthenium sp. were the least effective. Biomethanation of Spirogyra was carried out both in anoxic and oxic conditions. Though methane production decreased enormously under oxic conditions, definite methane production continued indicating that the biomethanation process is not exclusively anoxic. Similarly, biomethanation of sewage samples from different sewage treatment plants were carried out with and without isolated methanogens and methane production was found to be moderate.     

天然黏土材料附着纳米TiO2对 电解锰渣中锰的吸附固定

采用机械球磨法对膨润土、硅藻土、高岭土3种天然黏土材料进行预处理,通过超声法将纳米TiO_2附着于其上制得复合材料,考察了不同复合材料加入量及养护时间条件下复合材料对电解锰渣中Mn的吸附固定效果。3种天然黏土材料中,硅藻土的平均粒径最小,比表面积和总孔隙度最大,对水中Mn的吸附量也最大。黏土材料附着纳米TiO_2后对电解锰渣中Mn的吸附固定效果较单纯黏土材料有明显改善。在养护时间为12 d、硅藻土附着纳米Ti O_2复合材料加入量为10%(w)的最佳条件下,Mn的TCLP浸出量较原电解锰渣下降了83.04%。     

建筑材料及制品燃烧性能试验规范概述

建筑材料和制品燃烧性试验规范对保证建筑物内人的生命安全和财产安全是极为重要的。笔者对美国、加拿大、欧盟、日本以及中国的建筑材料燃烧性能试验规范进行分析、比较和综述。通过研究认为美国和加拿大对建筑材料燃烧性能的要求和试验方法基本相似,他们主要针对材料的燃烧性、火焰传播进行检测;欧盟于2001年颁布了新的燃烧性分级体系,该分级体系包括专门针对铺地材料部分和针对其他所有建筑构件材料和产品部门;日本采用锥形量热计法(ISO5660)将内装饰材料分为不燃、准不燃和阻燃材料3个等级;我国对建筑材料的试验方法包括不燃性试验方法、墙和天花板内装饰材料的三级分级体系和铺地材料两级分级体系。