循环经济建设中物质流分析的研究现状与进展

循环经济建设规划的首要任务是对系统进行物质流分析.按照系统的边界不同,物质流分析的研究通常分为3个层面--国家、区域及企业.在综合评述物质流分析研究现状的基础上,针对现有的不足,提出了今后的研究重点:①建立统一的计算方法,对物质流账户指标用生命周期评价进行修正;②对高资源消耗量和环境污染严重的重点行业企业的物质流进行分析研究; ③对国民经济发展非常重要的战略性资源,以及对环境危害较大物质的物质流开展研究工作.     

改善典型硝胺类易燃易爆材料引燃性能研究

通过针对典型硝胺类易燃易爆材料黑索今(RDX)和奥克托今(HMX)的引燃性能实验,研究了掺混碳黑和反应体系的封闭对上述药剂引燃特性的影响规律。研究表明,碳黑对硝胺类易燃易爆材料的激光吸收率有重要影响;反应体系的密封可以有效提高激光引燃感度,缩短激光引燃延迟时间,改善硝胺类易燃易爆材料的激光引燃性能。     

多环芳烃标准样品的研制

通过对6种多环芳烃(芴、菲、荧蒽、苯并[b]荧蒽、苯并[k]荧蒽、苯并[ghi])标准样品的研制,系统地介绍了液体介质标准样品的研究、制备、均匀性检验、稳定性检验、定值及数理统计的方法。      

多孔矿物-聚磷酸铵对甲烷爆炸的协同抑制研究

为探究新型多孔矿物(MTS)-聚磷酸铵(APP)复合粉体对甲烷-空气预混气爆炸的抑制效果,采用20 L球形爆炸装置开展多孔矿物、APP及其复合粉体在不同组成、不同添加浓度条件下的甲烷爆炸抑制试验,并使用热分析仪研究其热解行为.研究结果表明:当粉体添加量为0.100 g/L,多孔矿物与APP质量组成比为1∶3时,复合粉体...     

AMETEC数据库系统的研制结果与应用

本文概述了AMETEC数据库系统的研制过程及研制结果和应用,提出了本系统的意义之所在。     

高温过滤材料的应用及发展趋势

综述了国内外高温滤料的研究和发展情况,介绍了各种高温滤料的性能及其在相关行业的应用状况,分析了高温滤料的市场前景和技术发展趋势。     

Ignition characteristics, conditions of criticality and disappearance of criticality of cumene hydroperoxide reaction by modeling approach

The thermal explosion problem of cumene hydroperoxide exothermic reaction which is used in chemical industries for production of some chemical materials is investigated. The analytical solutions of the problem to determine the margin between ignition and non-ignition systems are presented. The solution offers different analytical expressions which relate between the critical parameters for both steady and unsteady-states in different planes of solutions for different cases. The numerical solutions in different planes offer different trajectories of solution as sub-critical (non-ignition) and supercritical (ignition). Also from the numerical solution the relations between the critical parameters are presented. The critical behaviors from both analytical and numerical solutions are concise and pertained the same results.     

广东省不同母质赤红壤磷的吸附与解吸

研究了广东省4种不同母质赤红壤磷的吸附与解吸特征,结果表明,4种不同母质赤红壤等温吸附方程（Langmuir方程,Freundilch方程和Temkin方程）的拟合结果都达到了极显著的水平。土训吸附磷量由大到小的顺序为：玄武岩＞页岩＞花岗岩＞砂页岩。赤红壤对磷的解吸顺序为：玄武岩＜页岩＜花岗岩＜砂页岩,说明粘粒较少的母质土壤对磷的吸附力也小,因此,更容量解吸。提高土壤有机质的含量,可以改善土训的供磷性能。     

A stochastic weather generation model for Alaska

A specific problem encountered in ecosystem-level simulation of Arctic ecosystems is the depth and extent of the driving variable record. Often, climate records are of short duration, gathered at locations different from the area to be simulated, or do not contain all the variables required by a given model. This paper addresses this problem for ecosystem simulation in Alaska with the development of a weather generator. The generator, called WGENAL, is based on the WGEN climate generator developed and validated in the 48 conterminous states. Because of the extreme variability of weather in Alaska that is not accommodated by the statistical metrics in the earlier model, a new climate generator was developed. WGENAL generates daily values of precipitation, maximum temperature, minimum temperature, solar radiation, and wind run. Precipitation is generated using a Markov chain-gamma model. A two-parameter gamma distribution is used to generate wind run. Temperatures and solar radiation are generated using procedures developed in the earlier study. Validation of the generator shows it provides adequate diurnal and seasonal weather records for Fairbanks. Other comparisons of synthetic weather with observed weather for sites north of the Brooks Range in Alaska are also within the error of the original data.     

Risks and benefits of compost-like materials prepared by the thermal treatment of raw scallop hepatopancreas for supplying cadmium and the growth of alfalfa (Medicago sativa L.)

Scallop hepatopancreas, fishery waste, contains relatively high levels of Cd and organic nitrogen compounds, the latter of which represent a fertilizer. In this study, raw scallop hepatopancreas tissue was thermally treated with sawdust and red loam in the presence of an iron catalyst to produce compost-like materials (CLMs). Two CLM samples were prepared by varying the content of raw scallop hepatopancreas tissue: 46 wt.% for CLM-1 and 18 wt.% for CLM-2. Mixtures of control soil (CTL) and CLMs (CLM content: 10 and 25 wt.%) were examined for the growth of alfalfa (Medicago sativa L.) to evaluate the risks and benefits of using this material for fertilization. The Cd content in shoots and roots of alfalfa, that were grown in the presence of CLMs, was significantly higher than those for the plants grown in the CTL, indicating that Cd had accumulated in the plants from CLMs. The accumulation of Cd in the alfalfa roots was quite high in the case of the 25% CLM-1 sample. However, alfalfa growth was significantly promoted in the presence of 10% CLM-1. This can be attributed to the higher levels of nitrogen and humic substances, which serve as fertilizer components. Although the fertilization effect in case of CLM-1showed a potential benefit, the accumulation of Cd in alfalfa was clearly increased in the presence of both CLMs. In conclusion, the use of CLMs produced from raw scallop hepatopancreas tissue can be considered to have a desirable benefit from standpoint of its use as fertilizer, but is accompanied by a risk of the accumulation of Cd in alfalfa plants.