土壤污染物的生态毒理效应和风险评估研究进展

环境生态风险评估（ERA）流程已经被纳入全球环境政策中,既用于规范新化学物质的授权和营销（前瞻性环境生态风险评估）,也用于评估潜在的污染场地（回顾性环境生态风险评估）。将土壤生态毒理学应用于风险评估,能阐明有毒物质对土壤生态系统中生命有机体的危害程度与范围。笔者主要介绍了应用评估因子法和物种敏感度分布法对基于效应数据进行的外推与估算,并综述了欧美等主要国家和地区的土壤生态风险评估框架、相关法律法规及其实施情况等,为中国开展土壤污染物生态毒理效应和风险评估等相关研究提供参考。     

岩溶地下河水化学对城镇化进程的时序响应

利用25年地下水观测与遥感解译数据研究地下河对城镇化进程的水化学时序响应,结果表明,随着城镇化的进行,地下河的矿化度逐渐上升;水化学类型时序演变从枯水期单一的HCO_3·SO_4-Ca·Mg型和丰水期HCO_3-Ca·Mg型向HCO_3·ClCa型、HCO_3·SO_4-Ca型、HCO_3-Ca和HCO_3·SO_4-Ca·Mg型等多类型演化,快速城镇化时期水化学类型多变.受地表降水输入影响,地下河枯水期与丰水期[Mg2+]/[Ca2+]和[HCO_3~-]/[SO_4~(2-)](摩尔比)变化较大,城镇化前地下河水化学受水岩相互作用、农业活动和酸雨入渗共同影响,两者均值分别为0. 86和29. 34; 2001年城镇化后农业活动和酸雨输入贡献减少,丰水期城镇化输入(居民生活和工业排污)明显增加,两者出现突变特征,分别降低至0. 38与6. 01. 1990～1995、1996～2010和2011～2015年不同时期的主要地球化学敏感阳离子分别为Ca~(2+)及Mg~(2+)、Na~+和NH_4~+,阴离子则分别为HCO_3~-、HCO_3~-及SO_4~(2-)和Cl~-.地下河对城镇化进程的水化学响应具有明显的阶段性和时序性.     

土壤中磺胺二甲嘧啶赋存对水稻生长的影响

为探究土壤中残留抗生素对植物生长的影响,选取土壤中检出率较高的磺胺类抗生素磺胺二甲嘧啶作为外源污染物,分析水稻苗期和成熟期生长指标、根系和叶片生理生化指标、水稻各器官中抗生素残留量和富集转运因子的变化特性,并评价水稻籽粒中残留磺胺二甲嘧啶的健康风险.结果表明,磺胺二甲嘧啶对水稻株高和生物量的抑制作用存在于整个生长周期中,且苗期的影响大于生长成熟期,根部受到的影响大于苗部.苗期秧苗根系活力、硝酸还原酶活性和叶片叶绿素含量受到随抗生素含量增加而增大的抑制作用,而抗氧化酶活性的变化趋势表现出不同特征,具体为超氧化物歧化酶活性增强、过氧化氢酶和过氧化物酶先被激活后被抑制.磺胺二甲嘧啶在水稻各器官中的积累量表现为：根>叶>茎>籽粒,且水稻籽粒的抗生素风险评估结果显示EDI/ADI<0.1,不构成健康风险.生长成熟期土壤中磺胺二甲嘧啶对水稻富集因子和转运系数的影响大于苗期.综合磺胺二甲嘧啶对水稻的不利影响,在水稻种植中施加畜禽粪便作为有机肥和使用养殖水进行农田灌溉时,需要关注磺胺二甲嘧啶的生态效应,保障水稻等作物的安全生产.     

中国典型湖泊四大类抗生素污染特征

基于已有文献资料数据,以中国东部平原湖区（31个）,蒙新湖区（4个）,二龙湖,青海湖及抚仙湖共38个典型湖泊为研究对象,总结分析四大类常用抗生素（四环素类,磺胺类,喹诺酮类和大环内酯类）在湖泊水体和沉积物中的污染特征.结果表明,四大类抗生素污染在中国典型湖泊中普遍存在,其中水体中抗生素污染水平依次为磺胺类（2147ng/L） > 喹诺酮类（1458ng/L） > 四环素类（481ng/L） > 大环内酯类（205ng/L）,沉积物中抗生素的分布具有垂向差异特征,表层沉积物抗生素浓度高于深层沉积物.抗生素检出浓度在不同湖区间存在较大差异,其中东部平原湖区水体和沉积物中抗生素浓度显著高于其他湖区.相比入湖河流,湖区（如太湖贡湖湾和青海湖）水体中抗生素污染相对较高,表明湖区可能作为抗生素的汇集地.湖泊水体中的抗生素浓度分布呈现季节性差异,如太湖水体中抗生素浓度在春,夏及冬季高于秋季,而鄱阳湖,白洋淀和二龙湖在旱季（4月）高于雨季（8月）;而湖泊沉积物中抗生素季节性差异较不明显,这可能与抗生素在沉积物中的迁移性有关.     

ACCURACY AND RELIABILITY OF NUMERICAL RIVER MODELS1

ABSTRACT: Over the last 20 years, our possibilities to model river flows numerically have increased enormously. In this paper, the question is addressed whether a more sophisticated model is always better than a simpler one. Increased detail, both in finer resolution and in physical processes taken into account, has its price in more computer time, higher data need, and perhaps more unknown coefficients to be calibrated. Moreover, uncertainty in actual physical conditions (e.g., bottom roughness), inflow and parameters remains, which may dominate the uncertainty of the results. Also, the questions asked by a decision maker may not always be very precise. For a schematic but relevant example, we show that a better model does not necessarily give more reliable results because some of the basic uncertainties remain. It is concluded that we should use the simplest model that will answer the question as to the accuracy needed, taking into account uncertainties in the data     

Sensitivity of Ozone Production to the Nmhc Composition, Aerosol Back-Scattering and High Chimney Emission

In this paper, three sensitivity studies are designed to analyze the effect of the NMHC (Non-Methane HydroCarbon) composition, the aerosol back-scattering and the high chimney NO_x emission to the photochemical prodution of ozone by using a one-dimensional photochemistry-diffusion model under a favourable meteorological condition. Measurements of the NMHC composition in Taipei indicated that the percentage of iso-butene, cis-2-butene, trans-2-butene and benzene in a unit volume was much higher than of those observed in other major cities. the high ratio of benzene was directly linked to its high percentage in gasoline. As to the unusually high amount of iso-butene, cis-2-butene and trans-2-butene, more researches are needed to identify their source. Concerns are raised as to how productive is NMHC composition is to the photochemical production of the surface ozone. A rough estimate shows that the total reactivity of the Taipei NMHC composition is about 1.21 × 10^-9 cm³ s^-1 which is 1.6 times that of the Los Angeles (LA) NMHC composition, while the simulated noon peak will be different by 28 ppbv, i.e. 18% more than that simulated with a LA composition.

Meanwhile, high aerosol loading is a serious problem in Taipei. the attenuation of the UV radiation by aerosols cannot be ignored. A numerical simulation shows that the noon ozone level will decrease from 178 to 141ppbv, i. e. about 21% reduction, with deterioration of the visual range from 85 to 5 km.

In the southern Taiwan, industry parks are mixed with the populated Kaohsiung city, hence the large emission of NO_x from high chimneys cannot be ignored. in this study, NO_x is assumed to be emitted in the layer between 235-460 m high with an emission rate of 0.05 or 0.145 ppbv/sec. the results show that the NO_x emitted from the elevated stack lead to a considerable reduction of surface ozone. Such conclusion is obtained due to the fact that a one-dimensional model is used in this paper. Whereas, if a three-dimensional regional model was used, then a higher productivity of ozone downstream would be simulated.     

COMPARATIVE WATER CHEMISTRY OF FOUR LAKES IN ROCKY MOUNTAIN NATIONAL PARK1

ABSTRACT: The inorganic chemistry of two pairs of lakes in Rocky Mountain National Park was studied to determine reasons for their similarities and differences. The pairs were located on differing geologic units. It was expected that weathering from the different types of parent material would cause differing cation concentrations between the pairs. This was verified by dissimilar concentrations of those cations which are products of primary weathering. Unexpected was a significant difference in anion concentrations between members of one pair having the same bedrock geology. This difference has been attributed to the presence of a wet sedge meadow above one of the lakes which serves as a biological filter for anions, particularly nitrate and sulfate. It is shown that small scale drainage characteristics which can alter regional atmospheric contributions are important contributors to lake chemistry.     

COMPARISON OF ALTERNATIVE ENGINEERING DESIGNS1

ABSTRACT: Procedures are presented for comparing and evaluating alternative engineering designs for a particular water resources project. By using certain aspects of fuzzy set theory, it is possible to introduce both quantitative and qualitative considerations into the decisionmaking process. In addition, the viewpoints of the various interest groups involved with the water resources development can be realistically incorporated by the evaluation techniques for the alternative designs. Methods are given for eliminating undesirable alternatives and thereby obtaining a reduced set of possible feasible solutions to the problem. Because of the flexibility of the evaluation methods, the viable alternatives should not only satisfy economical, technical. environmental and other types of constraints, but these possible solutions should be politically feasible as well. A method is formulated for checking the sensitivity of the feasible results with respect to the factors that are considered in the analysis.     

抗生素菌渣MOD技术处理后的肥料化利用潜力

采用中温中压氧化干化(MOD)技术对头孢菌渣、青霉素菌渣进行无害化处理,处理后菌渣(菌渣肥)中抗生素残留低于检出限(1 mg/kg)。经过对菌渣肥调质后,有机物、氮磷钾营养成分、重金属浓度等指标均可满足NY 525—2012《有机肥料》的要求,菌渣肥中7种典型耐药基因均未检出。进一步施肥试验结果表明:菌渣肥按1%和3%施入土壤30 d后,土壤中均未检出抗生素残留;菌渣肥能降低土壤的耐药基因富集程度。     

Extrinsic modeling and simulation of helio-photovoltaic system: a case of single diode model

Simulation of helio-photovoltaic system is continuously undergoing revolution through diverse parameter modifications which closely mimic the experimental data. In retrospect, the current work has presented a nonlinear modification of equivalent circuit parameters and simulated the same for different semiconductors (crystalline and thin films); furthermore, established a mathematical relation between the coefficients of solar irradiance and module temperature (SIMT); moreover, investigated the influence of SIMT on the model parameters. The simulation upshot reveals that increment in solar irradiance (SI) intensifies the output current whereas an increase in module temperature (MT) diminishes the output voltage; the SIMT coefficients developed validated well with the manufacturers data; the influence of SI was evident on the photon current, diode current, and shunt resistance whereas the effect of MT was pronounced on the diode current, ideality factor, and shunt resistance. Thus, the provision made by this work is essential for advanced design and simulation of helio-photovoltaic systems.