基于光纤免疫传感器的壬基酚快速检测方法

壬基酚（NP）作为一种内分泌干扰物,越来越受到人们的关注。基于倏逝波光纤免疫传感器,利用间接竞争免疫反应原理,建立了一种NP的快速检测方法。通过对预反应时间、进样时间及抗体质量浓度等反应条件进行优化,提高了检测方法的灵敏度。结果表明,检测标准曲线符合Logistic模型,NP的定量检测区间为41.7~487μg/L,检出限为20μg/L,检测方法的半抑制质量浓度（IC₅₀值）为143 μg/L。利用建立的检测方法对实际水样进行加标回收实验,回收率为86%~114%,表明该方法可用于较清洁水样中NP的快速检测。     

Effect of different pearling times on the quality of hull-less barley rice北大核心CSCD

Hull-less barley is a special food crop rich in various nutrients in Qinghai-Tibet Plateau. Six-pearling is often used to produce commercial hull-less barley rice in order to improve its rough taste and inferior cooking quality. This study evaluated the differences in the nutritional, cooking, sensory, and storage qualities of hull-less barley rice with different pearling times to obtain suitable processing conditions for the production of high-quality hull-less barley rice. With increasing pearling time, the contents of vitamin B6, vitamin E, dietary fiber, iron, zinc, phenols, and flavonoids significantly decreased to a large extent, protein and vitamin B3 decreased slightly, the contents of total starch and β-glucan increased significantly, and γ-aminobutyric acid (GABA) initially increased and then decreased. The peak, trough, and final viscosity of whole grain barley were 1 860.50 cP, 914.50 cP, and 2 150.00 cP, respectively, and increased after six-pearling to 4 219.00 cP, 2 628.00 cP, and 5 074.00 cP, respectively. At the same time, the water absorption and volume expansion of the pearled hull-less barley increased significantly. The hardness of pearled hull-less barley reduced from 4 708.50 g to 2 282.00 g, its adhesiveness increased from 0.00 to -7.33, and its taste and sensory quality exhibited better. The activities of α-amylase, polyphenol oxidase, lipase, and catalase in pearled hull-less barley slightly decreased. Hull-less bran flour is rich in a variety of nutritional components and could be a potential resource with great developmental value. In general, hull-less barley rice obtained from three-pearling has high nutritional value, high cooking quality, low enzyme activity, and low energy consumption; therefore, it can be used to produce high-quality barley rice. This study provides important information for high-quality pearled hull-less barley and further utilization of barley bran flour. © 2022 Science Press. All rights reserved.     

Functional flax fiber with UV-induced switchable wettability for multipurpose oil-water separation

● A PAA-ZnO-HDTMS flax fiber with UV-induced switchable wettability was developed. ● The property of flax fiber could be switched from hydrophobicity to hydrophilicity. ● The mechanism of the acquired UV-induced switchable wettability was discussed. ● The developed flax fiber was successfully used for multipurpose oil-water separation. The large number of oily wastewater discharges and oil spills are bringing about severe threats to environment and human health. Corresponding to this challenge, a functional PAA-ZnO-HDTMS flax fiber with UV-induced switchable wettability was developed for efficient oil-water separation in this study. The developed flax fiber was obtained through PAA grafted polymerization and then ZnO-HDTMS nanocomposite immobilization. The as-prepared PAA-ZnO-HDTMS flax fiber was hydrophobic initially and could be switched to hydrophilic through UV irradiation. Its hydrophobicity could be easily recovered through being stored in dark environment for several days. To optimize the performance of the PAA-ZnO-HDTMS flax fiber, the effects of ZnO and HDTMS concentrations on its switchable wettability were investigated. The optimized PAA-ZnO-HDTMS flax fiber had a large water contact angle (~130°) in air and an extremely small oil contact angle (~0°) underwater initially. After UV treatment, the water contact angle was decreased to 30°, while the underwater oil contact angle was increased to more than 150°. Based on this UV-induced switchable wettability, the developed PAA-ZnO-HDTMS flax fiber was applied to remove oil from immiscible oil-water mixtures and oil-in-water emulsion with great reusability for multiple cycles. Thus, the developed flax fiber could be further fabricated into oil barrier or oil sorbent for oil-water separation, which could be an environmentally-friendly alternative in oil spill response and oily wastewater treatment.     

极近距离煤层综放开采工作面覆岩“两带”发育规律研究*

为深入研究极近距离煤层综放开采工作面覆岩“两带”的动态发育规律,采用理论推导、数值模拟和现场实测相结合的方法,分析袁店一矿824工作面覆岩“两带”的裂隙演化特征。结果表明:从岩层层向拉伸率角度,研究上覆岩层垮落带和导水裂隙带的垮落程度,考虑角度影响推导出岩层弯曲下沉边缘段变形前后的长度计算公式,根据覆岩的碎胀特征计算各岩层的最大下沉量,预测垮落带和裂隙带的范围分别为30.2~41.2 m和70.7~78.2 m;采用3DEC数值模拟分析该矿824工作面开挖后上覆岩层垮落的基本形态和裂隙分布规律,结合其应力、位移云图和监测线位移曲线的分布特征,得出垮落带和裂隙带的高度分别为32.50 m和77.25 m;采用分布式光纤应变监测系统,监测工作面前方80 m处上部顶板的受力情况,得出受采动影响的光纤应变呈起伏变化,且应变分布与地层岩性存在对应关系,得出垮落带高度约30.4 m,裂隙带高度约74.8 m,验证采用层向拉伸率和覆岩碎胀性2个方面来预测工作面覆岩“两带”高度的合理性,可为类似方面的研究与施工提供相应的技术依据。     

吸附-电氧化法降解气态乙二醇乙醚乙酸酯(EGEA)的研究

采用吸附-电氧化两步联动降解VOCs,结果表明,相同电压下以铁作为阳极时的CODCr脱除率达到80%以上,比用不锈钢阳极时高40%左右.电解质溶液的pH值和CODCr值随时间有规律地变化,也验证了反应器中所发生的反应.     

等离子体改性对活性炭纤维表面化学结构的影响

采用放电等离子体对活性炭纤维表面进行改性,通过改变活性炭纤维的化学官能团来强化活性炭纤维对SO2和NOx的吸附和催化作用。利用XPS、FTIR等方法对改性活性炭纤维的化学性质进行表征,研究了活性炭纤维表面官能团在等离子体改性过程中的转化规律和机理。实验结果表明:放电改性过程可以有效地向活性炭纤维表面引入有利于脱硫脱氮的含氧、含氮官能团;当电压为8kV,放电时间为5min时,放电改性活性炭纤维的效果最佳。     

SBR法处理麻生物脱胶废水

利用 SBR工艺处理麻生物脱胶废水 ,对 CODcr、NH3-N的降解、SBR厌氧段和处理后水是否可回用进行了研究。实验结果证明 ,当进水 CODcr 15 0 0 mg/ L左右 ,MLSS的 CODcr负荷≤ 0 .74kg/ kg· d时 ,废水各项指标均可以达到 GB8978-1996苎麻脱胶废水综合排放二级标准 ,且可回用脱胶     

Effect of Pretreatment with UV Radiation on Physical and Mechanical Properties of Photocured Jute Yarn with 1,6-Hexanediol Diacrylate (HDDA)

Jute yarns were grafted with a single impregnating monomer 1,6-hexanediol diacrylate (HDDA) in order to improve the physicomechanical properties. Jute yarns soaked for different soaking times (3, 5, 10, and 30 minutes) in HDDA+MeOH solutions at different proportions (1–10% HDDA in MeOH [v/v] along with photoinitiator Darocur-1664 [3%]) were cured under UV lamp at different UV radiation intensities (two, four, six, and eight passes). Concentration of monomer, soaking time, and intensity of UV radiation were optimized with extent of mechanical properties such as tensile strength, elongation at break, and modulus. Enhanced tensile strength (67%), modulus (108%), and polymer loading (11%) were achieved with 5% HDDA concentration, 5-minute soaking time, fourth pass of UV radiation. To further improve the mechanical properties, the jute yarns were pretreated with UV radiation (5, 10, 15, 30, and 50 passes) and treated with optimized monomer concentration (5%). UV-pretreated samples showed the enhanced properties. The tensile strength and modulus increase up to 84% and 132%, respectively, than that of virgin jute yarn. An experiment involving water absorption capacity shows that water uptake by treated samples was much lower than that of the untreated samples. During the weathering test, treated yarns exhibited less loss of mechanical properties than untreated yarns.     

负载金属活性碳纤维对NO催化分解性能的研究

碳纤维用于环境保护,污染治理是个重要课题,采用浸渍法研制系列钯负载活性碳纤维,研究了它们对NO的歧化分解性能,并与其它载体催化剂进行比较,实验结果表明负载钯活性碳纤维在300℃以上能催化NO的歧化分解。负载钯活性炭和负载钯炭黑分解NO的能力明显比前者弱,石墨和分子筛载体负载钯催化剂在400℃仍没有催化分解NO的作用。催化反应温度升高,NO流量降低,钯负载量增加有利于NO分解率提高,采用钯－铜混合物负载活性碳纤维可以减少钯的使用量。     

膜萃取处理水溶液中镉、锌离子的工艺

以P204+正庚烷为萃取剂,将中空纤维膜萃取技术用于处理水溶液中镉离子、锌离子.研究了两相流速、初始浓度及溶液pH等因素对传质系数和萃取率的影响,计算了膜萃取器的传质单元高度(HTU)_w,同时还研究了萃取剂的再生问题.实验结果表明,在低浓度下(＜500 mg/L),平衡分配系数较大,传质阻力主要是在水相;在初始浓度较高时(＜2000mg/L),由于分配系数较小,三项传质阻力均不可忽略;在初始浓度很高时(＞2000mg/L),传质由有机相和膜相阻力控制.实验还表明通过膜器串联可以实现萃取剂的再生.对于稀溶液(＜200mg/L),中空纤维膜萃取可以使水溶液中金属离子浓度减小2个数量级,通过计算,中空纤维膜萃取器(HTU)_w在15～30cm之间,大大低于传统的萃取塔.