应用表面活性剂-生物柴油微乳液去除污染土壤中多环芳烃

针对修复焦化厂高浓度多环芳烃污染土壤高成本的现实,采用以非食用性植物油、生物柴油、表面活性剂及其乳化合成的微乳液为淋洗剂,比较不同淋洗剂的淋洗效果。结果表明乳化合成的微乳液对焦化厂土壤中多环芳烃的总去除率高于单独使用表面活性剂为淋洗剂对土壤中多环芳烃的总去除率,说明生物柴油及植物油与表面活性剂乳化形成的微乳液对原污染土壤中的多环芳烃具有显著的增溶作用。1%TW-80和2.5%TW-80对土壤中多环芳烃总去除率分别为11%和14%;以2.5%TW-80为原料乳化合成的微乳液的淋洗去除率较以1%TW-80为原料乳化合成的微乳液高,总去除率分别为15%～30%和11%～18%;以生物柴油为原料乳化合成的微乳液的淋洗去除率较以植物油为原料乳化合成的微乳液高,分别为17%～30%和15%～23%,且对多环芳烃的去除率与其辛醇水分配系数(logKow)呈线性相关关系。     

西安市大气中多环芳烃的季节变化及健康风险评价

对西安市2009年6月-2010年5月空气中的总悬浮颗粒（TSP）和气态样品进行了连续采样,利用GC—MS对16种PAHs进行分析。∑PAHs浓度（气相＋颗粒相）范围为39．93～1032．46ng／m^3,平均值为197．34ng／m^3;其中,冬季大气中∑PAHs浓度最大,相对浓度的范围为31．21％～72．98％,而夏季的浓度最小;检测出16种2～6环的PAHs,其中以3—4环为主。利用特征分子比值法和因子分析进行源解析,发现研究区PAHs的主要来源为燃煤和机动车尾气排放。通过苯并（a）芘（BaP）等效毒性（BEQ）和苯并（a）芘等效致癌浓度（BaPE）进行健康风险评价,结果显示,西安大气中PAHs的毒性具有明显的季节差异,特别是秋季和冬季大气中PAHs对人类的健康存在较大的潜在威胁。     

Sources and distribution of polycyclic aromatic hydrocarbons in sediments from the Spanish northern continental shelf. Assessment of spatial and temporal trends

The distribution of polycyclic aromatic hydrocarbons was determined in surface sediments collected at 36 stations along the Spanish Northern continental shelf in March and September 2003, and February 2005. Concentrations of PAHs (Σ13 parent components) were in the range of 22-47528 μg/kg dw, the highest values corresponding to coastal urban-industrial hotspots and decreasing offshore. Sediment quality guidelines (SQGs) showed that concentrations of total PAHs were below the threshold effect level (TEC) in 27 stations (81%) and above in 7, two of which (Gijon and Bilbao) were above the probable effect concentration (PEC). The detailed study of diagnostic ratios suggested a rather uniform mixture of petrogenic and pyrolytic PAH sources along the continental shelf, with a slight decrease of the latter moving westwards and offshore. In order to assess the incidence of sediment sampling on the variability of the results, selected stations were also monitored in February and September 2004 and September 2005. The average field variance of the values obtained for each station was 31% that decreased to 23% when the values were normalized to TOC.     

Factors influencing on the bioaccessibility of polybrominated diphenyl ethers in size-specific dust from air conditioner filters

Size-specific concentrations and bioaccessibility of polybrominated diphenyl ethers (PBDEs) in dust from air conditioner filters were measured, and the factors influencing the PBDE bioaccessibility were determined. Generally, the PBDE concentrations increased with decreasing dust particle size, and BDE209 (deca-BDE) was generally the predominant congener. The bioaccessibility ranged from 20.3% to 50.8% for tri- to hepta-BDEs, and from 5.1% to 13.9% for BDE209 in dust fractions of varied particle size. The bioaccessibility of most PBDE congeners decreased with increasing dust particle size. The way of being of PBDE (adsorbed to dust surface or incorporated into polymers) in dust significantly influenced the bioaccessibility. There was a significant negative correlation between the tri- to hepta-BDE bioaccessibility and organic matter (OM) contents in dust. Furthermore, tri- to hepta-BDE bioaccessibility increased with increasing polarity of OMs, while with decreasing aromaticity of OMs. The tri- to hepta-BDE bioaccessibility significantly positively correlated with the surface areas and pore volumes of dust. Using multiple linear regression analysis, it was found that the OM contents and pore volumes of dust were the most important factors to influence the tri- to hepta-BDE bioaccessibility and they could be used to estimate the bioaccessibility of tri- to hepta-BDEs according to the following equation: bioaccessibility (%) = 45.05 − 0.49 × OM% + 1.79 × pore volume. However, BDE209 bioaccessibility did not correlate to any of these factors.     

响应面法优化聚丙烯酸/腐殖酸/累托石吸附剂的制备条件

以累托石、丙烯酸及腐殖酸为原料制备出能同时吸附重金属和多环芳烃的吸附剂聚丙烯酸/腐殖酸/累托石,采用响应面试验设计法优化吸附剂的制备条件。利用Design Expert软件,建立了预测吸附剂对Cd2+、菲吸附量的二次回归模型,对回归模型进行了方差分析,并确定了吸附剂的最佳制备条件。结果表明,二次回归模型能较好地模拟Cd2+、菲的吸附量与影响因子丙烯酸中和度、引发剂量和交联剂量之间的关系。各因子对Cd2+吸附量的影响次序为:交联剂量>引发剂量>丙烯酸中和度;对菲吸附量的影响次序为引发剂量>交联剂量>丙烯酸中和度。吸附剂的最佳制备条件为:累托石、丙烯酸和腐殖酸三者的质量比为65∶30∶5,丙烯酸中和度、引发剂量和交联剂量分别为75.16%、2.57%和0.44%。在此优化条件下制备的吸附剂对Cd2+和菲的吸附量分别为170.19 mg/g和7.36 mg/g。     

Temperature-dependent sorption of polycyclic aromatic hydrocarbons on natural and treated sediments

In aqueous environment temperature is considered to play a significant role in the sorption process of polycyclic aromatic hydrocarbons (PAHs) and its influence on the sorption equilibrium is indicative of sorption energies and mechanisms. In this study, sorptions of five PAHs on three heterogeneous sorbents including one river sediment (YHR), one estuary sediment (YRD) and one treated sediment with organic matter removed (IM) were carried out at a range of temperature from 5 °C to 35 °C. Stronger sorptions were observed at lower temperatures, with the equilibrium sorption coefficient K_d increasing 2-5 times as the temperature decreases 30 °C. The increase of K_d value was attributed primarily to the change of PAH water solubility, which predicted 40-75% of the increase of K_d in the sorption process. To provide insight into the sorption mechanism, enthalpy change (ΔH_S) for the sorption process was calculated and the values were observed to be negative for all of the interactions, suggesting that the exothermal sorption of PAHs inversely dependents on temperature. Based on the values of ΔH_S, van der Waals forces were inferred as the main sorption mechanism for the PAHs, especially on the YHR sediment which contained more organic matter. For sorption of larger size PAHs on the sorbents with low organic matter, specific interactions were deduced to contribute to the overall sorption.     

Environmental assessment of garden waste management in the Municipality of Aarhus, Denmark

An environmental assessment of six scenarios for handling of garden waste in the Municipality of Aarhus (Denmark) was performed from a life cycle perspective by means of the LCA-model EASEWASTE. In the first (baseline) scenario, the current garden waste management system based on windrow composting was assessed, while in the other five scenarios alternative solutions including incineration and home composting of fractions of the garden waste were evaluated. The environmental profile (normalised to Person Equivalent, PE) of the current garden waste management in Aarhus is in the order of −6 to 8 mPE Mg⁻¹ ww for the non-toxic categories and up to 100 mPE Mg⁻¹ ww for the toxic categories. The potential impacts on non-toxic categories are much smaller than what is found for other fractions of municipal solid waste. Incineration (up to 35% of the garden waste) and home composting (up to 18% of the garden waste) seem from an environmental point of view suitable for diverting waste away from the composting facility in order to increase its capacity. In particular the incineration of woody parts of the garden waste improved the environmental profile of the garden waste management significantly.     

胎盘内多环芳烃分布及源解析研究

探讨多环芳烃在胎盘中的分布,并对其进行源解析。从2012年6月—2013年6月在云南省第一人民医院产科分娩的产妇中随机抽取30例,利用气相色谱-质谱联用仪(GC-MS)检测其胎盘中多环芳烃的含量;比较胎盘的中央部分和边缘部分多环芳烃含量的差异;对多环芳烃进行源解析,探讨其主要来源。胎盘中检测到多种多环芳烃成分;其中2~4个苯环的多环芳烃占总量的90%以上,尤其是萘、苊、芴、菲、蒽、芘、荧蒽的含量较高;萘、苊烯、苊、茚并(1,2,3-c,d)芘、二苯并(a,h)蒽5种多环芳烃在胎盘中央的含量高于边缘,具有显著性差异(P0.05),其他多环芳烃在胎盘中央和边缘的含量无显著性差异(P0.05)。多环芳烃源解析提示80%研究对象体内的多环芳烃主要来自石油产品的燃烧或暴露于石油产品。     

典型印染废水处理过程中芳香烃化合物的污染特征及污泥生态风险评价

采用GC-MS测定了典型综合印染废水处理厂废水和污泥中芳香烃化合物的含量.结果表明,原水中苯系物总量为203.96±15.18μg·L-1,其中二甲苯占62.7%,尾水中苯系物总量为0.2±0.029μg·L-1,整个处理工艺对苯系物的去除效率为99%.原水中多环芳烃(PAHs)总浓度达1349.51±35.77 ng·L-1,以3—6环为主,主要富集在颗粒物上.整个工艺对PAHs的去除效率为95%,尾水中PAHs总浓度为65.81±20.99ng·L-1,以2—3环为主.干污泥中PAHs含量高达2996.10±151.0 ng·g-1,污泥吸附为水相中PAHs去除的主要机理之一.印染污泥直接填埋或农用会引起潜在的生态危害.     

基于放射性碳分析的多环芳烃源解析:技术进展和准确性评估

化石燃料燃烧和生物质燃烧是污染物多环芳烃(polycyclic aromatic hydrocarbon,PAHs)的两大来源.放射性碳(14C)分析近年用于评估这两类源对环境中PAHs的相对贡献.此方法基于化石燃料和生物质的14C含量差异,即化石燃料不含14C,而生物质的14C浓度有一个较稳定值.14C的自然丰度极低(约10-12),因此检测PAHs这样的痕量污染物的14C含量一度极具挑战.1990年代中期,加速器质谱的技术突破使得对环境样品PAHs的14C分析具有实用价值.要准确测出PAHs的14C含量,须先从化学成分复杂的环境样品中分离出高纯度的PAHs.制备气相色谱因其出色的分离能力而成为目前环境样品PAHs14C分析必备的工具.本文意在简介基于14C分析的PAHs源解析的基本原理、技术进展,以及评估该方法获得的PAHs源解析结果的准确性.