连续式磁性颗粒去除器在轧钢废水处理中的应用

连续式磁性颗粒去除器，是利用稀土永磁Ｎｄ－Ｆｅ－Ｂ为材质，处理含磁性颗粒废水的装置，其主要结构由动力传递，磁块组合体，磁条移动，设备本体，进出口流道及分离部件等组成，该文阐述了永磁分离机理，并通过磁性悬浮颗粒的理论驱进速度和最小捕获粒径的求解，探讨了提高砒生粒去除器捕 方法，实践证明，该装置用于冶金轧钢废水处理中，能代替传统的轧钢废水三级处理工艺，节约投资成本７０％，占地减少８５％，运行费用亦大幅     

垃圾焚烧飞灰物理化学性质的实验研究

应用激光粒度粒形分析仪、灰熔融性测定仪、原子吸收光谱仪和XRD等仪器手段对国内2种垃圾焚烧飞灰的密度、颗粒特性、熔点、成分和晶相结构等物理化学性质进行了详细的研究。研究发现，2种灰样颗粒直径的数量积分分布非常接近，其中基本没有超过40／μm的颗粒。由于垃圾焚烧飞灰在化学成分上存在的差异导致了其熔点有很大的不同。此外，XRD结果显示不同来源的飞灰其晶相结构存在较大的差别，这可能与垃圾的来源和焚烧工艺以及烟气处理方法有关。实验结果为飞灰无害化低温烧结工艺的选择和运行参数的制定提供了依据。     

混合填充体系对铬渣中六价铬的阻留作用

以铬渣和粉煤灰为混合填充体系的主要填料，采用柱子淋洗法，通过改变混合填料的配比来研究其对铬渣中Cr(Ⅵ)的阻留作用。试验结果表明，各种混合填充体系对Cr(Ⅵ)均有一定程度的阻留作用，其中I—5校对Cr(Ⅵ)的阻留固定效果最佳，淋出液中Cr(Ⅵ)的质量分数为0．删％，相对阻留效果达94．53％。     

磁选柱在矿山磁选尾矿和硫铁矿烧渣处理中的应用

介绍了磁选柱的结构、分选原理、分选过程及其在处理矿山磁选尾矿和硫铁矿烧渣方面的应用。用磁选柱精选磁铁矿尾矿，得到的精矿品位大于66％；用磁选柱精选硫铁矿烧渣，得到的精矿品位大于65％。硫的质量分数降至0．84％。     

Drying of granulated wood ash by flue gas from saw dust and natural gas combustion

At the district heating plant of Kalmar, Sweden an on-line unit for production of granulated wood ash for nutrient recycling on forest soils is being applied. Currently, the granules are dried by hot air from an oil-fired burner. The objective of this work was to investigate how drying by flue gas affects the hardening of granules, or impacts their chemical composition and properties. Ninety-six granule samples were treated by flue gas from natural gas combustion in a laboratory pilot scale flue gas generator. CO₂, CO, O₂, C₃H₈ and NO concentrations were varied during the experiment. Additionally, some samples were treated by flue gas from combustion of sawdust at the heating plant in Kalmar. Drying by flue gases did not affect the chemical composition of granules, but minor effects were seen in their mineralogy. The carbonate content was slightly higher in granules treated with flue gas from natural gas combustion compared to the granules dried by hot air only, when measured by wet chemical methods. Results from XRD analysis imply that the calcite content is higher and the portlandite and arcanite content slightly less in granules treated with flue gas from sawdust combustion compared to the granules dried by hot air only. The results from this investigation showed no negative effects on ash granule composition or physical structure by the use of a flue as a drying medium.     

以造粒粉煤灰为过滤介质去除景观水中磷的研究

研究了造粒粉煤灰的最大磷吸附量、磷吸附速率等吸附特征，以及颗粒粒径、磷浓度、水力负荷对景观水除磷效果的影响。还进行了为期21天的连续过滤试验，发现滤床在高水力负荷条件下能持续地去除景观水中的磷。     

Stabilization and utilization of hospital waste as road and asphalt aggregate

This article reports the operational results of the effective utilization of hospital waste molten slag produced using a high-temperature melting system, and being operated at a hospital in Selangor, Malaysia. The hospital waste is incinerated and subsequently melted at 1200°C. Scanning election microscope (SEM)/EDX results showed that the slag produced after melting contained amounts of SiO₂, CaO, and Al₂O₃ in excess of 53%, 9%, and 16%, respectively. The results from a leaching analysis on the slag produced proved that the melting process had successfully stabilized the heavy metals. The use of this slag as an alternative material to replace conventional aggregates for road construction was studied. The results from aggregate and asphalt mix tests showed that the slag produced fulfills all the requirements of an alternative aggregate. The average asphalt content, or the optimum asphalt content to be mixed with hospital waste molten slag, was found to be about 5.53%.     

垃圾焚烧飞灰中重金属的固化/稳定化处理实验研究

研究了城市生活垃圾焚烧-电灰的特性及飞灰中重金属的特性,对利用水泥作粘结剂进行飞灰固化/稳定化处理效果开展了系统的实验研究,分析了水泥固化/稳定化飞灰的工艺特点和最佳工艺参数,并讨论了粘结剂固化飞灰机理以及重金属浸出毒性,为进一步研究城市生活垃圾焚烧飞灰的无害化处理与利用提供了有重要价值的参考依据.     

The effect of Na and Ca salts on MSWI bottom ash activation for reuse as a pozzolanic admixture

In this study the possibility of both chemical and combined chemical + thermal activation of municipal solid waste incinerator bottom ash was investigated. A number of chemical activators including Na₂SiO₃·9H₂O, NaOH, Na₂SO₄ and CaCl₂·2H₂O were individually added at varying concentrations to bottom ash/Portland cement mixtures having different bottom ash contents. The effect of the selected compounds was evaluated in terms of macroscopic properties including mechanical strength and composition of cementitious materials/water slurries. The results showed that Na-based activators were not capable of improving the characteristics of the cementitious products if compared to Portland cement under both normal and accelerated curing. Conversely, the use of calcium chloride at 40 °C-curing did promote the pozzolanic properties of bottom ash, leading to UCS values of 45.5 and 60.0 MPa after 10 and 20 days, respectively, as opposed to a value of 43.6 MPa obtained after 28 days for Portland cement under normal curing conditions.     

Fault detection and diagnostics of a three-phase separator

A high demand of oil products on daily basis requires oil processing plants to work with maximum efficiency. Oil, water and gas separation in a three-phase separator is one of the first operations that are performed after crude oil is extracted from an oil well. Failure of the components of the separator introduces the potential hazard of flammable materials being released into the environment. This can escalate to a fire or explosion. Such failures can also cause downtime for the oil processing plant since the separation process is essential to oil production. Fault detection and diagnostics techniques used in the oil and gas industry are typically threshold based alarm techniques. Observing the sensor readings solely allows only a late detection of faults on the separator which is a big deficiency of such a technique, since it causes the oil and gas processing plants to shut down.A fault detection and diagnostics methodology for three-phase separators based on Bayesian Belief Networks (BBN) is presented in this paper. The BBN models the propagation of oil, water and gas through the different sections of the separator and the interactions between component failure modes and process variables, such as level or flow monitored by sensors installed on the separator. The paper will report on the results of the study, when the BBNs are used to detect single and multiple failures, using sensor readings from a simulation model. The results indicated that the fault detection and diagnostics model was able to detect inconsistencies in sensor readings and link them to corresponding failure modes when single or multiple failures were present in the separator.