改性粉煤灰去除利福平废水色度的研究

粉煤灰经过废硫酸改性处理后吸附能力大大提高,用改性粉煤灰对生化后的利福平废水进行了脱色试验,实验考察了废硫酸的投加量、pH值、粉煤灰的粒径对色度去除率的影响,并对脱色机理进行了分析。粉煤灰改性后应用于利福平废水处理中达到以废治废,具有一定的经济意义。     

垃圾焚烧飞灰基本性质的研究

分析了几种焚烧飞灰的基本性质,讨论了燃烧过程中可能影响飞灰中重金属分布的因素,研究表明:焚烧飞灰结构复杂性和性质多变,其主要的化学组成为Cl、Ca、K、Na、Si、Al、O等,主要的重金属为Zn、Pb、Cr、Cu等;飞灰多以不规则的无定形态和多晶聚合体的结构存在,浸出毒性一般超过危险废物鉴别标准;重金属主要以气溶胶小颗粒和富集于飞灰颗粒表面的形式存在于飞灰中.焚烧厂和焚烧时间的变化对于飞灰性质有较大影响,几种飞灰的Cl含量范围为6.93%～29.18%,SiO₂为4.48%～24.84%;浸出毒性则在0～163.10mg·L^-1(Pb)、0.049～164.90mg·L^-1(Zn)之间变化.     

Environmental impact of a coal combustion-desulphurisation plant: abatement capacity of desulphurisation process and environmental characterisation of combustion by-products

The fate of trace elements in a combustion power plant equipped with a wet limestone flue gas desulphurisation (FGD) installation was studied in order to evaluate its emission abatement capacity. With this aim representative samples of feed coal, boiler slag, fly ash, limestone, FGD gypsum and FGD process water and wastewater were analysed for major and trace elements using the following techniques: inductively coupled plasma-mass spectrometry (ICP-MS), inductively coupled plasma-atomic emission spectrometry (ICP-AES), ion chromatography (IC), ion selective electrode (ISE) and atomic absorption spectroscopy (AAS). Mass balances were established allowing to determine the element partitioning behaviour. It was found that, together with S, Hg, Cl, F, Se and As were those elements entering in the FGD plant primarily as gaseous species. The abatement capacity of the FGD plant for such elements offered values ranged from 96% to 100% for As, Cl, F, S and Se, and about 60% for Hg. The environmental characterisation of combustion by-products (boiler slag, fly ash and FGD gypsum) were also established according to the Council Decision 2003/33/EC on waste disposal. To this end, water leaching tests (EN-12457-4) were performed, analysing the elements with environmental concern by means of the aforementioned techniques. According to the leaching behaviour of combustion by-products studied, these could be disposed of in landfills for non-hazardous wastes.     

村镇小型生活垃圾热处理炉底渣的理化特性

小型垃圾热处理设备可实现就地处置,节约运输成本,目前在中国山区、丘陵地带的村镇得到广泛应用.为了解村镇小型生活垃圾热处理炉底渣的理化特性及其影响因素,对中国云南、贵州、安徽村镇实际运行的小型生活垃圾热处理设备产生的底渣进行取样,分析其热灼减率、物理组成、化学组成、晶相组成、重金属含量和浸出特性,探讨处理工艺、地域及季节...     

粉煤灰负载壳聚糖对磷吸附的热力学研究

以粉煤灰负载壳聚糖作为吸附剂,在静态吸附条件下,研究了其对磷的吸附行为,并对吸附过程的热力学进行了分析。结果表明,吸附平衡数据都能够较好地符合Langmuir和Freundlich吸附等温方程,但Langmuir方程能够更好地描述吸附等温线。在20～35℃范围内,磷在粉煤灰负载壳聚糖上的吸附是一个吸热过程,反应的吉布斯自由能变小,同时伴随着熵值的增加,吸附焓变为44.36 kJ/mol。     

废弃炉渣用于灰水过滤的试验研究

介绍了利用锅炉炉渣有效去除灰水中灰粒的试验方法，试验发现，炉渣直径和灰水流速直接影响去除效率。     

Recovery of the Benthic Macroinvertebrate Community in a Small Stream After Long-Term Discharges of Fly Ash

Recovery of the benthic macroinvertebrate community in a small east Tennessee stream impacted by fly ash discharges from a power plant was investigated over a period of 6.5 years. The rate of recovery was greatest in the first 2 years after an initial 75% reduction in coal use led to a similar reduction in ash discharges and associated contaminants; further recovery followed after all fly ash discharges ceased. Recovery of the stream progressed through two phases. In the first phase, which lasted for approximately the first 2 years, most density and richness metrics increased considerably. In the second phase of recovery, the increases in metric values were followed by declines before fluctuating in and out of the lower reference ranges for the metrics. Detrended correspondence analyses and indicator species analyses showed that changes in species composition and community structure were ongoing throughout the second phase. Thus, the first phase was characterized by species additions, while the second phase involved species replacements and shifts in community dominants. Further recovery of the macroinvertebrate community will probably depend on additional flushing of fly ash deposits from the streambed and flood plain, because their continued presence reduces habitat quality in the stream and serves as a potential source of contaminants. Further recovery also may be limited by the availability of vagile species in nearby watersheds.     

A study of the extraction of vanadium and nickel in oil-fired fly ash

Annual production of oil-fired fly ash in Taiwan is approximately 43 000 tons, of this approximately 13 000 tons is electrostatically precipitated, the rest is cyclonically collected. Structurewise, both consist of porous unburned carbon, vanadium and nickel oxide, and water-soluble sulfate. Electrostatically precipitated fly ash contains large amounts of ammonium sulfate. If these ashes are not properly disposed of, they become environmental problems, such as dusting, leakage of acid liquids, and pollution with heavy metals. This paper discusses the experimental extraction of vanadium and nickel from oil-fired fly ash. The results indicated that leaching of oil-fired fly ash in 0.5 N of sulfuric acid led to an extraction of 65% vanadium, 60% nickel, and 42% iron, along with an increase in the concentration of sulfuric acid. When leached in 2 N sodium hydroxide solution, the extraction of vanadium was 80%, and the extraction of nickel was negligible. If leached in an ammonia water, the extraction of nickel increased, along with an increase in the concentration of ammonia in water. When leached with 4 N ammonia water, the extraction of nickel was 60%, the extraction of vanadium was less than that obtainable from leaching in sulfuric acid solution or in sodium hydroxide solution. If electrostatically precipitated fly ash was leached in a solution of 0.25 N ammonia water and 2 N ammonium sulfate, it would yield an extraction of 60% nickel and 8% vanadium—leading to a selective extraction of nickel. This study has established an extraction flowsheet in which fly ash was first leached in an ammoniacal solution containing ammonium sulfate to recover nickel. The leached residues were then leached in an alkaline solution to recover vanadium.     

Aluminum recovery from electronic scrap by High-Force® eddy-current separators

The amount of electronic scrap which contains a substantial portion of non-ferrous metals, primarily copper and aluminum, has been growing. The present study is directed toward aluminum recovery by a newly developed eddy current separator. The investigation on shredded personal computer and printed circuit board scrap demonstrates that the High-Force® eddy-current separator will be applicable for this purpose. It has been shown that, by a single pass of the materials on the High-Force® eddy-current separator, an aluminum concentrate out of personal computer scrap can be obtained with a purity of 85%, while maintaining a recovery in excess of 90%, with the feed rate being up to 0.3 kg/min.     

Disaster Management for Nandira Watershed District Angul (Orissa) India, Using Temporal Remote Sensing Data and Gis

NALCO – the largest exporter of aluminium in India has a power plant of 720 MW capacity in Nandira watershed in Angul district of Orissa. The power plant utilises local coal to generate thermal power and disposes of large amount of ash which accumulates in slurry form at nearby two ash ponds. These ash ponds were breached on 31 December 2000, causing ash accumulation for entire regime of the Nandira river. An attempt has been made towards preparation of recovery and rehabilitation plan for NALCO using temporal Remote Sensing data and GIS. Indian remote sensing satellite data for pre-breach condition 12 December 2000, during breach event 31 December 2000 and post-breach condition 4 and 6 January 2001 has been digitally analysed for Nandira watershed. The satellite data of coarse spatial resolution provides the absence and presence of fresh sediment deposition along Nandira watershed and Brahmani river pertaining to pre-breach and post-breach conditions respectively on regional scales. The temporal comparison of fine resolution has clearly highlighted the aerial extent of damage caused by the disaster for entire watershed on local scales. The GIS has helped in demarcation of freshly accumulated ash at interval of 500 m along the river length as well as in delineation of maximum ash accumulation across the river width. The study has clearly demonstrated the use of temporal Remote Sensing data in conjunction with GIS for disaster management in terms of recovery and rehabilitation plan preparation of the Nandira watershed.