安全信息认知对心理安全感的作用机理研究

为揭示安全信息认知对员工心理安全感的影响,把握信息时代背景下心理安全感的研究趋势。基于安全信息认知的背景与特征,构建心理安全感的安全信息认知流程模型。通过描述安全信息对心理安全感的影响机理,从需要、动机、意识、期望剖析心理安全感的安全信息认知动力,归纳心理安全感的安全信息认知偏好,并从风险管控、安全氛围、安全管理落地、安全防护措施设计、员工安全生产积极性方面论述心理安全感在企业的应用对策。研究表明,员工安全信息认知对其心理安全感具有重要影响,是引起心理安全感波动的关键因素,也为心理安全感在企业的应用提供指导。     

某矿低铜废石综合回收利用项目职业病危害预评价

为了对某矿业有限公司低铜废石综合回收利用项目可能产生的职业病危害因素进行辨识、分析和评价,采用检查表、类比法相结合的原则对该项目的铲装、破碎、运输、筑堆等工艺进行分析评价,并利用经验法对浸出、萃取电积工艺进行分析评价。结果表明:类比工程中绝大部分粉尘、噪声检测点的浓（强）度符合国家标准;化学毒物、工频电场接触浓（强）度符合国家标准;电积车间的通风满足要求;萃取车间的事故通风能力不足。评价方法及通风计算方法对同类项目具有借鉴意义。     

基于CREAM和贝叶斯网络的空管人误概率预测方法

针对研究管制人因可靠性时存在的模糊性和片面性问题,采用认知可靠性与失误分析方法（CREAM）中的扩展预测法,计算10项管制通用任务的人误概率;在此基础上,以管制行为形成因子作为根节点构建贝叶斯网络,建立其与情景控制模式的不确定关系模型,对管制员在多任务中的人误概率进行预测。研究结果表明:在由相同评判者给出行为形成因子影响效应的前提下,由CREAM扩展预测法和构建贝叶斯网络的方法预测得到的多数任务的人误概率差异较大,从方法的客观性、合理性和适用性角度分析,贝叶斯网络在研究该问题时更具优势。     

波浪与抛石潜堤相互作用的MPS法数值模型研究

为了研究波浪与抛石潜堤相互作用过程中大自由表面变形和堤内渗流等强非线性紊流运动问题,利用改进的MPS法,建立了模拟波浪与抛石潜堤相互作用的MPS法数值计算模型。模型将抛石潜堤假定为均质多孔介质,采用Drew的二相流运动方程描述多孔介质内外的流体运动;通过在动量方程中增加非线性阻力项,并引入亚粒子尺度紊流模型,模拟波浪与可渗结构物相互作用过程中的紊流运动。选取“U”型管中多孔介质内渗流过程和孤立波与可渗潜堤相互作用两个典型的渗流问题,通过将数值计算结果与理论解和实测值的对比分析,对所提出的MPS法紊流渗流模型的模拟精度进行验证。结果表明：基于改进的MPS法构建的垂向二维紊流渗流模型可以很好地再现 “U”型管中多孔介质内渗流以及波浪作用下可渗潜堤内外的复杂流场,显著缓解流-固界面处的压力震荡与粒子分布不均匀问题,实现了较高的模拟精度。     

畜禽环境中抗生素的去除及其风险评估

抗生素作为饲料添加剂广泛应用于畜禽养殖业,造成养殖环境抗生素大量蓄积,尤其是在畜禽粪便中,长期的积累不仅污染养殖场内土壤环境,残留的抗生素还会随畜禽粪便进入周边水体及农田环境,威胁农作物及人体健康。目前,国内相关研究主要集中在抗生素的降解工艺及降解规律方面,而对其去除效率的影响因素及风险评价研究相对较少。笔者综述了国内外抗生素的降解转化及去除方式等的研究进展,并概述了抗生素在畜禽环境中的生态风险评估的研究现状,为抗生素的高效去除、风险预估及畜禽粪便资源化安全利用提供理论基础和技术支撑。     

Utilization of MSWI fly ash as partial cement or sand substitute with focus on cementing efficiency and health risk assessment

• Washed MSWI fly ash was used as partial cement or sand substitute. • Sand replacing is beneficial for strength, while cement replacement reduces strength. • Cementing efficiency factor and mortar pore structure explain the strength results. • Health risk assessment was conducted for MSWI fly ash blended cement mortar. • CR and HI contributed by different exposures and heavy metals were analyzed. The strength of cement substituted mortar decreases with the increase in fly ash amount, whereas the strength increases when the fly ash is blended as sand substitute. A mortar with highest strength (compressive strength= 30.2 Mpa; flexural strength= 7.0 Mpa) was obtained when the sand replacement ratio was 0.75%. The k value (cementing efficiency) of fly ash varied between 0.36 and 0.15 for the fly ash fraction in binder between 5% and 25%. The k values of fly ash used for sand replacement were all significantly above that used for cement substitution. The macropores assigned to the gaps between particles decreased when the fly ash was used as sand replacement, providing an explanation for the strength enhancement. The waste-extraction procedure (toxicity-sulphuric acid and nitric acid method (HJ/T 299-2007)) was used to evaluate metal leaching, indicating the reuse possibility of fly ash blended mortar. For the mortar with the mass ratio of fly ash to binder of 0.5%, the carcinogenic risks (CR) and non-carcinogenic hazard quotient (HQ) in sensitive scenario for blended mortar utilization were 9.66 × 10^-7 and 0.06, respectively; these results were both lower than the threshold values, showing an acceptable health risk. The CR (9.89 × 10^-5) and HQ (3.89) of the non-sensitive scenario for fly ash treatment exceeded the acceptable threshold values, indicating health risks to onsite workers. The main contributor to the carcinogenic and non-carcinogenic risk is Cr and Cd, respectively. The CR and HQ from inhalation was the main route of heavy metal exposure.     

基于VB6.0的供水管网震害预测方法和软件

为了提高供水管网震害预测的效率,修订了现有供水管网震害预测模型,应用Visual Basic 6.0软件平台,开发了供水管网震害预测软件。震害预测软件提供了两方面的预测功能,分别为不同地震烈度下供水管段基于三态的破坏等级预测和供水管网基于五态的破坏等级预测。软件实现了批量供水管段及整个管网的震害预测,且可以进行管网在设定地震下的震害预测,提高了预测效率。经算例分析,验证了软件的可靠性。     

基于灾害风险评估的山地城市固定避难场所布局优化研究——以东川区为例

研究以各区域灾害风险评估系数作为权重系数,对山地小城市各区域避难场所进行优化布局。首先,通过风险值=危险性*脆弱性/抗灾救灾能力机理表达式构建灾害风险评估指标体系,并以模糊综合评价法得出灾害风险评估数值,在此基础上通过多目标选址优化模型来构建山地城市避难场所的优化模型,其中灾害风险评估系数作为影响布局的权重因素纳入其中。最后,以东川区为研究对象,对其固定避难场所进行优化布局研究,结果表明:东川区城区固定避灾场所数量可在接近最优解的情况下达到效果最优。     

A Rapid Method for Assessing the Environmental Performance of Commercial Farms in the Pampas of Argentina

The generation of reliable updated information is critical to support the harmonization of socio-economic and environmental issues in a context of sustainable development. The agro-environmental assessment and management of agricultural systems often relies on indicators that are necessary to make sound decisions. This work aims to provide an approach to (a) assess the environmental performance of commercial farms in the Pampas of Argentina, and (b) propose a methodological framework to calculate environmental indicators that can rapidly be applied to practical farming. 120 commercial farms scattered across the Pampas were analyzed in this study during 2002 and 2003. Eleven basic indicators were identified and calculation methods described. Such indicators were fossil energy (FE) use, FE use efficiency, nitrogen (N) balance, phosphorus (P) balance, N contamination risk, P contamination risk, pesticide contamination risk, soil erosion risk, habitat intervention, changes in soil carbon stock, and balance of greenhouse gases. A model named Agro-Eco-Index was developed on a Microsoft-Excel support to incorporate on-farm collected data and facilitate the calculation of indicators by users. Different procedures were applied to validate the model and present the results to the users. Regression models (based on linear and non-linear models) were used to validate the comparative performance of the study farms across the Pampas. An environmental dashboard was provided to represent in a graphical way the behavior of farms. The method provides a tool to discriminate environmentally friendly farms from those that do not pay enough attention to environmental issues. Our procedure might be useful for implementing an ecological certification system to reward a good environmental behavior in society (e.g., through tax benefits) and generate a commercial advantage (e.g., through the allocation of green labels) for committed farmers.     

Selecting Species for Marine Assessment of Radionuclides Around Amchitka: Planning for Diverse Goals and Interests

Considerable attention has been devoted to selecting bioindicator species as part of monitoring programs for exposure and effects from contaminants in the environment. Yet the rationale for selection of bioindicators is often literature-based, rather than developed with a firm site-specific base of data on contaminant levels in a diverse range of organisms at different trophic levels in the same ecosystem. We suggest that this latter step is an important phase in the environmental assessment process that is often missing. In this paper we address the problem of how to select a wide range of species representing different trophic levels that serve as a basis for selecting a few species suitable as bioindicators. We illustrate this with our assessment of radionuclides on Amchitka Island, Alaska. We propose a multi-stage process for arriving at the list of available species that includes review of literature, review by experts experienced in the area, review by interested and affected parties, selection of trophic levels or groups for analysis, arraying of possible species, and selection of species within each trophic level group for sample collection. We first had to identify all likely species, then narrow our focus to those we could collect and analyze. In all cases, review includes suggestions for possible target species with justifications. While this method increases the up-front costs of developing bioindicators for an ecosystem, it has the advantage of providing information for selection of species that will be most informative in the long run, including those that are the best bioaccumulators, thus providing the earliest warning of any potential environmental consequences. Further, the recognition that a range of stakeholder's needs and interests should be included increases the utility for public-policy makers, and the potential for continued usage to establish long-term trends.