二维平流扩散模型下的集合卡尔曼滤波模拟同化研究

为提高环境数值预报水平,构建了一个针对污染物扩散的模拟数据同化系统。采用集合卡尔曼滤波方法对二维平流扩散模型的状态变量进行了实时校正,实现污染物浓度的实时模拟预报,完成了敏感性实验中集合数目变化、观测方差变化和同化窗口长度变化研究。比较考察观测点位置与污染源距离不同时的预报效果,探讨了优化条件下的同化策略,提出一种根据距离远近动态调节卡尔曼增益权重的方法。在集合数目较小时,可降低计算代价,得到优化的同化效果。     

广州天河区大气中二噁英年度监测及气固分配规律

对广州天河区大气中二噁英进行年度监测和气固分配模式的研究。结果表明,天河区大气中存在较高浓度的二噁英;低氯代二噁英对毒性当量贡献较大,其主要分布在气相,2,3,4,7,8-PeCDF对毒性当量贡献最大,其贡献超过35%;高氯代二噁英(主要是OCDF、OCDD、1,2,3,4,6,7,8-HpCDF和1,2,3,4,6,7,8-HpCDD)对浓度贡献较大,其主要分布在颗粒相。     

山区和平原连接处SF6试验及扩散规律研究

为更好了解污染物在复杂地形条件下的湍流扩散规律,2010年9月开展了一系列SF6示踪扩散试验,获取了SF6浓度数据,以此实验数据为基础,计算出SF6浓度分布在水平和垂直方向的扩散标准差、地面峰值浓度等参数,并与P-T-C扩散参数进行对比,总结得出了污染物在山区和平原连接处中性、稳定、强稳定等气象条件下湍流扩散规律。     

Spatial diffusion patterns of Protestants in Guangdong since 19th century

地理环境往往会对宗教的扩散和分布产生重要影响.扩散是宗教地理研究关注的一个重要方面,而对具体宗教扩散模式的研究在国内尚属薄弱.对基督教新教自19世纪初传人广东后的空间扩散形态进行分析,发现存在着多种扩散模式.其中,点轴式迁移扩散最为普遍,但中间障碍的存在常常使发展轴线发生变换;等级扩散呈现出按照人口分布规模、交通地重要性和行政等级的特征;传染扩散模式随着媒介的变化而不断演进;依托海岛的跳板式扩散则是沿海地区基督教扩散的特殊形式.这些模式虽是从经典文化扩散模式演化而来,但在具体特征上已有显著变化.研究试图对传统的文化扩散模式进行重新解读,并为"腹地一口岸一市场"的文化扩散理论提供成熟案例.     

任意风向时的线源扩散模式研究

给出了一个适用于风向与公路成任意夹角的有限长线源的扩散模式;讨论了不同风向、线源长度等,对线源中心下风距离的污染物地面浓度的影响;并将这个模式与CALINE-2模式和风洞试验结果进行了比较。     

Evaluation of the technoeconomic feasibility of electrochemical hydrogen peroxide production for decentralized water treatment

• Gas diffusion electrode (GDE) is a suitable setup for practical water treatment. • Electrochemical H₂O₂ production is an economically competitive technology. • High current efficiency of H₂O₂ production was obtained with GDE at 5–400 mA/cm². • GDE maintained high stability for H₂O₂ production for ~1000 h. • Electro-generation of H₂O₂ enhances ibuprofen removal in an E-peroxone process. This study evaluated the feasibility of electrochemical hydrogen peroxide (H₂O₂) production with gas diffusion electrode (GDE) for decentralized water treatment. Carbon black-polytetrafluoroethylene GDEs were prepared and tested in a continuous flow electrochemical cell for H₂O₂ production from oxygen reduction. Results showed that because of the effective oxygen transfer in GDEs, the electrode maintained high apparent current efficiencies (ACEs,>80%) for H₂O₂ production over a wide current density range of 5–400 mA/cm², and H₂O₂ production rates as high as ~202 mg/h/cm² could be obtained. Long-term stability test showed that the GDE maintained high ACEs (>85%) and low energy consumption (<10 kWh/kg H₂O₂) for H₂O₂ production for 42 d (~1000 h). However, the ACEs then decreased to ~70% in the following 4 days because water flooding of GDE pores considerably impeded oxygen transport at the late stage of the trial. Based on an electrode lifetime of 46 days, the overall cost for H₂O₂ production was estimated to be ~0.88 $/kg H₂O₂, including an electricity cost of 0.61 $/kg and an electrode capital cost of 0.27 $/kg. With a 9 cm² GDE and 40 mA/cm² current density, ~2–4 mg/L of H₂O₂ could be produced on site for the electro-peroxone treatment of a 1.2 m³/d groundwater flow, which considerably enhanced ibuprofen abatement compared with ozonation alone (~43%–59% vs. 7%). These findings suggest that electrochemical H₂O₂ production with GDEs holds great promise for the development of compact treatment technologies for decentralized water treatment at a household and community level.     

不同声学元件在公路声屏障中的应用

通过对公路声屏障不同声学元件声学性能的比较研究，阐明了两种声学元件在治理交通噪声中的差别，指出吸声共振型声学元件将是未来公路声屏障的发展方向，该研究结论对于开展公路声障声学设计有较为重要的参考价值     

西安市PM_(2.5)污染源位置确定的模型应用研究

针对空气中PM2.5污染物的传播问题,以西安市的情况为实例,合理考虑风力等天气和季节因素的影响,建立能够刻画该地区PM2.5的发生和演变规律的有风高斯点源扩散数学模型,代入相关数据后,利用MATLAB软件求解出PM2.5污染源由一区扩散到另一区的浓度,最后由综合的各区总浓度得出PM2.5污染源的位置,并与该市实际检测到PM2.5数据进行对比分析。结果表明,确定的位置比较准确,该方法能为城市污染治理提供参考。     

小风和静风状态下TSP大气扩散模式的理论推导

以移动烟团积分模式为基础,采用数学模型分析法,从理论上导出了小风和静风状态下的TSP大气扩散模式。该模式描述了重力沉降和地面不完全反射对颗粒物大气扩散过程的影响;与现有的大气扩散模式体系完全相容,可以方便地应用于小风和静风状态下TSP地面浓度的预测计算     

Application of interface material and effects of oxygen gradient on the performance of single-chamber sediment microbial fuel cells (SSMFCs)

Single-chamber sediment microbial fuel cells(SSMFCs) have received considerable attention nowadays because of their unique dual-functionality of power generation and enhancement of wastewater treatment performance. Thus, scaling up or upgrading SSMFCs for enhanced and efficient performance is a highly crucial task. Therefore, in order to achieve this goal, an innovative physical technique of using interface layers with four different pore sizes embedded in the middle of SSMFCs was utilized in this study.Experimental results showed that the performance of SSMFCs employing an interface layer was improved regardless of the pore size of the interface material, compared to those without such layers. The use of an interface layer resulted in a positive and significant effect on the performance of SSMFCs because of the effective prevention of oxygen diffusion from the cathode to the anode. Nevertheless, when a smaller pore size interface was utilized, better power performance and COD degradation were observed. A maximum power density of 0.032 mW/m~2 and COD degradation of 47.3% were obtained in the case of an interface pore size of 0.28 μm. The findings in this study are of significance to promote the future practical application of SSMFCs in wastewater treatment plants.