Acid Deposition in the Tuscan Appennines During the Dry Period 1988-89

The typical parameters of acid precipitation are evaluated in the forest of Vallombrosa (Tuscan Appennines) during the dry period 1988-89. Individual rain events (dry and wet deposition) were sampled in a clearing of the forest and below the canopy of an evergreen tree as well as a deciduous broadleaf tree.

In atmospheric precipitation the pH values usually vary around 4.4, with neutralization in the hot season due to calcareous material from distant sources. Relatively large concentrations of Pb and Cd are found in rain, but only in a small amount in canopy leachate. Aluminium, manganese and iron are more significantly washed off than Pb and Cd.     

喷射溶气回流浮选工艺处理含油废水

采用喷射溶气回流浮选工艺处理含油废水，替代原来的全加压溶气浮选工艺，提高了浮选过程的处理效果，增强了系统的抗负荷冲击能力，浮选出水油含量由原来的〈４０ｍｇ／Ｌ降至〈２０ｍｇ／Ｌ，ＣＯＤ由原来的〈１５０ｍｇ／Ｌ降至〈１１０ｍｇ／Ｌ。     

除湿机的冷凝水化学成分与空气环境质量的关系

本文采用家用除湿机作为空气水溶性物质采样器方法，并验证了该方法作为空气水溶性物质采样嚣的可行性。本文通过空气冷凝水化学成分与空气总悬浮微粒(TSP)可溶性化学成分的对比，得到水汽中大部分阴阳离子的含量只比TSP低1个数量级，而水汽中的微量元素含量与各种碳的浓度不都比TSP低，TSP中一般检测不出亚硝酸根，而水汽中则检出大量亚硝酸根。     

大气环境影响评价工作分级要求要点

根据大气环境影响评价工作的分级要求,提出了针对性的工作要点,以满足大气环境评价工作的需要.     

加油站地下储油罐压力管理系统的相关研究

在当前普遍采用的加油站真空辅助式第二阶段油气回收系统中,为了避免回收到地下储油罐中的油气再次通过P/V阀排空,必须对其中气相空间的压力实施有效控制。从国外的发展情况来看,地下储油罐的压力管理系统主要分为基于膜分离技术、基于弹性气囊和基于活性炭吸附三大类,其中膜法油气回收装置在国内已经得到了较多关注。首次系统介绍了气囊式压力管理系统的工作原理及其主要结构设计,具体包括管线布局、钢制压力容器壳体、位于容器顶部封头上的接口组件和全部位于容器内的气囊等;同时对另外一种可行方案进行了分析。     

海南西沙试验站大气霉菌群落初步调查

目的 筛选西沙试验站大气环境优势菌种,进行西沙试验站装备敏感菌研究。方法 采用撞击法进行大气霉菌采样,用统计学法计算出不同试验场地真菌数量,结合形态学法与ITS1-5.8S-TIS2或26SrDNA D1/D2区序列分析法鉴定菌种,并用SPSS初步探讨大气真菌与环境因素的关系,分析西沙试验站装备敏感菌。结果 西沙试验站优势种为Aspergillus aculeatus、Penicillium citrinum、Pithomyces sacchar、变红镰孢霉Fusarium incarnatum、Cladosporium oxysporum和Cladosporium oryzae,影响西沙试验站大气霉菌群落结构的重要环境因素是相对湿度和风速,贮存在西沙试验站的装备容易长霉,多种材料有不同的敏感菌,尤其是涂层样件和橡胶类材料。结论 西沙试验站大气环境中存在种类繁多的霉菌。     

Comparison of Soil Extraction Isotherms of Soil Samples Saturated With Nonpolar Liquids

In multiphase systems capillary pressures play a significant role on fluid movement and retention. The facility to predict the effect of different thermal remediation strategies requires the knowledge of the effect of temperature on capillary pressure-saturation relationships in the soils. The objective of recent study was (a) to develop a technique for routinely measuring the pressure-saturation curves of soil samples saturated with a nonpolar liquid at different regulated temperatures (b) to build a database using the measured pressure-saturation curves and the physical, chemical properties of the model soils (c) to establish the dependence of nonaqueous phase liquid retention on the soil properties and the temperature. The retention curves (extraction isotherms) with nonaqueous phase liquid were determined using a modified pressure plate extractor. The wetting phase was a non-aromatic hydrocarbon distillation product. Pressure plates were designed and constructed in the laboratory of our department. The temperature was held constant at 20, 40 and 60 ^∘C. Statistical analysis was performed involving selected soil parameters and the measured nonaqueous phase liquid retention data. The results show that knowing some easily measurable soil parameters (bulk density, particle size distribution, humus and lime content) we can estimate the nonaqueous phase liquid retention of the soils. The measured “extraction isotherms” provide essential information about the temperature-dependency of pressure-saturation curves.     

京津冀地区气溶胶季节变化及与云量的关系

利用2000年3月—2008年2月中分辨率成像光谱仪(MODIS)的卫星资料,分析了京津冀平原地区大气气溶胶光学厚度(AOD)和气溶胶细粒子组分比率(FMF)的时空分布特征. 结果表明:通过AOD与FMF的组合特征可判别气溶胶季节变化特征.冬、春季以粗粒子为主,但冬季AOD偏小,而在春季急剧增大;夏、秋季均以细粒子为主,但夏季AOD达到最大,秋季较小. 大气环流和气流后向轨迹分析表明,冬季到达北京的气流以西北冷空气为主,西北路径的气流轨迹占冬季气流轨迹总数的67%;春季主要受偏西、西北及偏北气流影响,这3类对沙尘天气有贡献的气流轨迹占春季气流轨迹总数比例之和达到60%;夏季主要以偏南气流和局地环流占优,这2类气流轨迹分别占夏季气流轨迹总数的52%和34%;秋季气流轨迹与春季的相似,但途经沙源的气流传输速度较春季慢.京津冀平原地区夏季AOD与云量(CF)呈正相关,AOD增加,特别是细粒子增加可能导致局地云量增多.      

原状黄土的反压饱和法试验研究

含水量是黄土液化特性研究中的一个至关重要的参数,对原状黄土进行充分饱和是饱和黄土动三轴试验中一个不可回避的课题。以WF公司生产的WF12440型空心圆柱扭剪仪为实验平台,运用反压饱和法,对室内原状黄土进行了饱和试验研究。该仪器提供3种不同加压方式增加围压和反压(孔压),即手动加压、自动加压和线性持续加压,通过检测孔隙压力系数B值是否达到0.95以上来判断黄土是否完全饱和。试验表明,即便是初始饱和度较低的原状黄土,也可以采用反压饱和法,在较短的时间内使孔压系数B值达到0.95以上,实现完全饱和,具体可以采用线性连续加压方式;初始压力差,即围压和反压之差一般可设为10 kPa,起始围压也设为10 kPa,太大或太小都会对试样造成破坏;如果孔压在1分钟内的变化值小于围压和反压之间压力差的5%,则认为孔压稳定,即可进行B值检测。     

Disparity of a Seat Cushion and Its Influence on Postural Control

Properties of supporting surfaces of a seat have an influence on postural control. Centre of pressure (COP) displacement parameters reflect both the balance controlling process and movements of the centre of a mass of entire body. The subjects of the study were 9 healthy men. A seat cushion was examined with a 2-force platform setup. Force exertion at a seat pan and feet and COP displacement at a seat pan were measured to analyse postural control. Analysis of variance determined the differences in postural control depending on a cushion type among the subjects. Significant differences in COP displacement parameters were in COP trajectory length, medio-lateral COP displacement and COP velocity. The results of the study showed that foam cushion ensures better postural control.