三烧溴化锂集中制冷空调系统改建设计

武钢三烧区域改建了二台大连三洋蒸汽型双效溴化锂吸收式制冷机。叙述了该改建项目的主机选型、参数选定、设计特点等。     

Increase in Hair Lead, but not Blood Lead Content of Occupationally-Exposed Workers

This study attempted to investigate whether increased hair lead concentrations due to environmental exposure are accompanied by parallel increases in blood lead concentrations. A sample set consisting of both occupationally-exposed individuals and persons from the general population was investigated. The lead content of scalp and pubic hair from the general population (n=189), traffic police personnel (n=27) and battery workers (n=22) were analysed. The hair samples were taken from the nape of the neck by cutting 23 cm closest to the scalp and cleaned using a washing procedure developed in our laboratory. The effectiveness of the washing procedure was partly determined by examining the scanning electron micrographs of the hair samples. Venous samples of blood were taken from each volunteer's arm.The traffic police and battery plant operators sampled had significantly higher average scalp hair and pubic hair lead levels than the non occupationally-exposed general population. No significant differences were found between the blood lead values of these workers and the general population. Compared to the general population both occupationally-exposed groups had significantly more symptoms of lead toxicity.Lead particles were still observed on the hair shafts after the washing procedure. The amount of such lead contamination was difficult to quantify, the problem being further exacerbated by the difference in hair texture of the persons sampled. This exogenous contamination therefore detracts from the usefulness of hair as an indicator of lead exposure.     

电解铝生产含氟工业烟气湿法吸收治理中试装置设计实现

本文通过对国内外近几年有关电解铝含氟化氢工业尾气净化处理大量的参考文献的分析研究及国内外电解铝生产企业在尾气治理方面的技术应用和尾气净化装置运行状况的调研,结合自己的专业特长和工程经验,建立一套有关电解铝含氟化氢尾气在处理、净化氟化氢方面的技术方案,设计制作一套湿法氟化氢吸收中试装置,从工艺方案优化设计、安全运行、设备设计及选材、自动控制、建立相关的副产物检测方法和后续产物的综合利用等方面进行了研究和探讨。     

离子液体对CO2吸收性能的研究进展

CO2引起的气候变暖已成为全球最关注的环境问题之一,利用离子液体固定CO2引起了众多学者的关注。介绍了近年来离子液体吸收CO2的研究进展,包括常规离子液体和含氨基离子液体、氨基酸离子液体、聚离子液体及其他离子液体等4种功能化离子液体,并简要分析了吸收机理。综合分析了每种离子液体的吸收性能,离子液体对CO2的吸收能力均随温度上升而减小,随压力升高而增加。烷基链的增长以及含氟基团的增加有利于对CO2的吸收。功能化离子液体由于引入了功能化基团,相同条件下,其对CO2的吸收力几乎是常规离子液体的两倍。此外,将离子液体与有机溶液(特别是醇胺溶液)混合能提高离子液体对CO2的吸收能力,且能降低生产费用。最后指出了高吸收性能、低黏度、低毒以及低成本是未来离子液体的研究方向。     

NaOH溶液吸收CO2的试验研究

为了满足国际海事组织对船舶CO2排放的要求,建立了一种针对船舶尾气CO2的循环吸收系统,利用NaOH溶液吸收CO2.NaOH溶液完成第一步吸收反应后在第二步反应中被还原,从而可以循环利用.分析了初始反应温度、NaOH浓度及溶液中的Na2CO3对CO2吸收率的影响,并计算了循环反应中NaOH的再生率和CaO的过量系数.结果表明,CaO过量系数为1.2时对CO2固化效果最佳,此时NaOH溶液再生率达79.31％.研究表明,NaOH溶液吸收船舶尾气中CO2的循环系统效率高、成本低.     

不同方法测定水体总氮存在的问题探讨及条件优化研究

利用碱性过硫酸钾消解紫外分光光度法,探讨了消解时间和消解温度对空白吸光值的影响,认为增加消解时间可以降低空白吸光值,而提高消解温度对空白吸光值的影响不大;对于某些样品中总氮含量低于氨氮含量的现象,将碱性过硫酸钾装入小试管,再放入装有水样的比色管中,虽然能够减少氨气形式逸出的氮含量,但回收率较低;连续流动和流动注射-盐酸萘乙二胺分光光度法,在以后的修订中应增加过硫酸钾含氮量以及镉柱还原能力大小的界定.     

气相分子吸收光谱法测定氨氮校准曲线斜率、截距参考值研究

主要阐述了气相分子吸收光谱法测定氨氮的校准曲线斜率、截距参考值的分析.文章收集了临安市环境监测站实验室自2012年以来气相分子吸收光谱法氨氮校准曲线制作的一系列原始数据,并通过数理统计方法对校准曲线、残余标准偏差、斜率扩展不确定度、截距扩展不确定度开展了详细讨论,得出气相分子吸收光谱法氨氮校准曲线截距a值、斜率b值实验室参考值.此结果对实验室分析人员判定氨氮项目校准曲线制作是否合格具有一定的参考价值.     

Strategies for improving the photocatalytic performance of metal-organic frameworks for CO2 reduction: A review

Photocatalytic CO₂ reduction is an appealing strategy for mitigating the environmental effects of greenhouse gases while simultaneously producing valuable carbon-neutral fuels. Numerous attempts have been made to produce effective and efficient photocatalysts for CO₂ reduction. In contrast, the selection of competitive catalysts continues to be a substantial hindrance and a considerable difficulty in the development of photocatalytic CO₂ reduction. It is vital to emphasize different techniques for building effective photocatalysts to improve CO₂ reduction performance in order to achieve a long-term sustainability. Metal-organic frameworks (MOFs) are recently emerging as a new type of photocatalysts for CO₂ reduction due to their excellent CO₂ adsorption capability and unique structural characteristics. This review examines the most recent breakthroughs in various techniques for modifying MOFs in order to improve their efficiency of photocatalytic CO₂ reduction. The advantages of MOFs using as photocatalysts are summarized, followed by different methods for enhancing their effectiveness for photocatalytic CO₂ reduction via partial ion exchange of metal clusters, design of bimetal clusters, the modification of organic linkers, and the embedding of metal complexes. For integrating MOFs with semiconductors, metallic nanoparticles (NPs), and other materials, a number of different approaches have been also reviewed. The final section of this review discusses the existing challenges and future prospects of MOFs as photocatalysts for CO₂ reduction. Hopefully, this review can stimulate intensive research on the rational design and development of more effective MOF-based photocatalysts for visible-light driven CO₂ conversion.     

Heavy metal bioaccumulation in selected medicinal plants collected from Khetri copper mines and comparison with those collected from fertile soil in Haridwar,India

Heavy metal distribution in medicinal plants is gaining importance not only as an alternative medicine, but also for possible concern due to effects of metal toxicity. The present study has been focused on emphasizing the heavy metal status and bioaccumulation factors of V, Mn, Fe, Co, Cu, Zn, Se (essential metals) and Cr, Ni, Cd, As and Pb (potentially toxic metals) in medicinal plants grown under two different environmental conditions e.g., near to Khetri copper mine and those in fertile soils of Haridwar, both in India, using Instrumental Neutron Activation Analysis (relative method) and Atomic Absorption Spectrometry. The copper levels in the medicinal plants from Khetri were found to be 3-4 folds higher (31.6–76.5 mg kg^?1) than those from Haridwar samples (7.40–15.3 mg kg^?1), which is correlated with very high copper levels (763 mg kg^?1) in Khetri soil. Among various heavy metals, Cr (2.60–5.92 mg kg^?1), Cd (1.47–2.97 mg kg^?1) and Pb (3.97–6.63 mg kg^?1) are also higher in concentration in the medicinal plants from Khetri. The essential metals like Mn (36.4–69.3 mg kg^?1), Fe (192–601 mg kg^?1), Zn (24.9–49.9 mg kg^?1) and Se (0.13–0.91 mg kg^?1) and potentially toxic metals like Ni (3.09–9.01 mg kg^?1) and As (0.41–2.09 mg kg^?1) did not show much variations in concentration in the medicinal plants from both Khetri and Haridwar. The medicinal plants from Khetri, e.g., Ocimum sanctum, Cassia fistula, Withania somnifera and Azadirachta Indica were found rich in Ca and Mg contents while Aloe barbadensis showed moderately high Ca and Mg. Higher levels of Ca-Mg were found to correlate with Zn (except Azadirachta Indica). The bioaccumulation factors (BAFS) of the heavy metals were estimated to understand the soil-to-plant transfer pattern of the heavy metals. Significantly lower BAF values of Cu and Cr were found in the medicinal plants from Khetri, indicating majority fraction of these metals are precipitated and were immobilized species unsuitable for plant uptake. Overall, Withania somnifera (Ashwagandha) showed very high metal bioaccumulation.     

Absorption characteristics of new solvent based on a blend of AMP and 1,8-diamino-p-menthane for CO2 absorption

Aqueous 1,8-diamino-p-menthane (KIER-C3) and commercially available amine solutions were tested for CO₂ absorption. A 2-amino- 2-methyl-1-propanol (AMP) solution with an addition of KIER-C3 showed 9.3% and 31.6% higher absorption rate for CO₂ than the AMP solution with an addition of monoethanolamine (MEA) and ammonia (NH₃), respectively. The reaction rate constant for CO₂ absorption by the AMP/KIER-C3 solution was determined by the following equation: k_2,AMP/C3 = 7.702×10⁶ exp (-2248.03/T). A CO₂ loading ratio of the AMP/KIER-C3 solution was also 2 and 3.4-times higher than that of the AMP/NH3 solution and the AMP/MEA solution, respectively. Based on the experimental results, KIER-C3 may be used as an excellent additive to increase CO₂ absorption capability of AMP.