17α-乙炔基雌二醇在微塑料上的吸附和解吸行为

以内分泌干扰物17α-乙炔基雌二醇（EE2）作为目标污染物,系统研究了5种微塑料聚酰胺（PA）、聚乙烯（PE）、聚氨酯（TPU）、聚氯乙烯（PVC）和聚苯乙烯（PS）对EE2的吸附动力学、吸附等温线及解吸作用.微塑料对EE2的吸附动力学和吸附等温线的结果表明,5种微塑料对EE2的吸附能力为PA>TPU>PE>PVC>PS;5种微塑料中TPU和PA具有最大的吸附能力和吸附容量,主要归因于氢键产生的化学吸附;而PE、PS、PVC主要是依靠范德华力的相互作用.因PA和TPU对EE2的吸附能力更强,两者的解吸量均高于其他3种物质.采用解吸率来反映不同微塑料的解吸性能,发现EE2在PS中的解吸率最高,PA和TPU上解吸率相对较低.采用单因素重复测量方差分析统计学方法对EE2在5种微塑料上的解吸特性进行分析,EE2在PS与其他4种微塑料之间表现为显著性差异,其余微塑料两两之间无显著性差异;尽管肠胃液中解吸率高于去离子水,但两者并无显著性差异.     

原位形成生物铁锰氧化物对砷(Ⅲ/V)的去除效果与机制

通过改变砷的初始浓度、砷价态、细菌接种比、铁锰浓度等因素来研究不同条件下Pseudomonas putida strain MnB1原位诱导形成生物铁锰氧化物（Biogenic Fe-Mn oxides,BFMO）对As（Ⅲ）和As（V）的去除效果与机制.结果表明：①当As（Ⅲ）和As（V）初始浓度为0.5~5 mg·L^-1时,原位形成的BFMO对As（Ⅲ）和As（V）有良好的去除效率,均在62%以上;②当细菌接种比为0.1%~0.5%时,As（Ⅲ）和As（V）的去除效率与细菌接种比成正比,当细菌接种比大于0.5%时,As（Ⅲ）和As（V）的去除效率基本维持在85%以上,未发生明显变化;③当MnCO₃浓度为0.2~0.8 g·L^-1或Fe（Ⅱ）浓度为2.5~25 mg·L^-1时,原位诱导产生的BFMO对As（Ⅲ）和As（V）的去除率随MnCO₃浓度或Fe（Ⅱ）浓度的增加而增大;当MnCO₃或Fe（Ⅱ）浓度再升高时,As（Ⅲ）和As（V）的去除效率基本保持不变.微观特征分析结果表明,原位形成的BFMO与As（Ⅲ）和As（V）反应后主要产物为As（V）,其去除主要以吸附为主,还存在共沉淀作用.总体而言,原位形成的BFMO适用于砷污染水环境的修复.     

Efficient degradation of Rhodamine B by magnetically recoverable Fe3O4-modified ternary CoFeCu-layered double hydroxides via activating peroxymonosulfate

Environment-friendly nano-catalysts capable of activating peroxymonosulfate (PMS) have received increasing attention recently. Nevertheless, traditional nano-catalysts are generally well dispersed and difficult to be separated from reaction system, so it is particularly important to develop nano-catalysts with both good catalytic activity and excellent recycling efficiency. In this work, magnetically recoverable Fe₃O₄-modified ternary CoFeCu-layered double hydroxides (Fe₃O₄/CoFeCu-LDHs) was prepared by a simple co-precipitation method and initially applied to activate PMS for the degradation of Rhodamine B (RhB). X-ray diffraction (XRD), fourier transform infrared spectrometer (FT-IR), scanning electron microscope (SEM), transmission electron microscopy (TEM), Brunauer-Emmett-Teller method (BET), and vibrating sample magnetometer (VSM) were applied to characterize morphology, structure, specific surface area and magnetism. In addition, the effects of several key parameters were evaluated. The Fe₃O₄/CoFeCu-LDHs exhibited high catalytic activity, and RhB degradation efficiency could reach 100% within 20 min by adding 0.2 g/L of catalyst and 1 mmol/L of PMS into 50 mg/L of RhB solution under a wide pH condition (3.0-7.0). Notably, the Fe₃O₄/CoFeCu-LDHs showed good super-paramagnetism and excellent stability, which could be effectively and quickly recovered under magnetic condition, and the degradation efficiency after ten cycles could still maintain 98.95%. Both radicals quenching tests and electron spin resonance (ESR) identified both HO? and SO₄^?? were involved and SO₄^?? played a dominant role on the RhB degradation. Finally, the chemical states of the sample's surface elements were measured by X-ray photoelectron spectroscopy (XPS), and the possible activation mechanism in Fe₃O₄/CoFeCu-LDHs/PMS system was proposed according to comprehensive analysis.     

Isolation and characterization of a strain with high microbial attachment in aerobic granular sludge

Aerobic granule is a special microbial aggregate associated with biofilm structure. The formation of aerobic granular sludge is primarily depending on its bacterial community and relevant microbiological properties. In this experiment, a strain with high microbial attachment was isolated from aerobic granular sludge, and the detailed characteristics were examined. Its high attachment ability could reach 2.34 (OD_600nm), while other low attachment values were only around 0.06-0.32, which indicated a big variation among the different bacteria. The strain exhibited a very special morphology with many fibric fingers under SEM observation. A distinctive behaviour was to form a spherical particle by themselves, which would be very beneficial for the formation and development of granular sludge. The EPS measurement showed that its PN content was higher than low attachment bacteria, and 3D-EEM confirmed that there were some different components. Based on the 16S rRNA analysis, it was identified to mostly belong to Stenotrophomonas. Its augmentation to particle sludge cultivation demonstrated that the strain could significantly promote the formation of aerobic granule. Conclusively, it was strongly suggested that it might be used as a good and potential model strain or chassis organism for the aerobic granular sludge formation and development.     

微生物燃料电池-人工湿地耦合系统研究进展

微生物燃料电池-人工湿地耦合系统(CW-MFC)是一种新型污水处理工艺,该系统在增强污水处理效果的同时提高了产电性能,具有广阔的应用前景。综述了CW-MFC系统的研究现状,并将影响CW-MFC系统处理效果和产电效率的因素概括为组成要素、结构特点和运行参数3个方面。论文最后总结了系统当前存在的问题,并对未来的研究方向进行展望。     

乘用车内空气质量开发与管控研究

本文主要介绍了乘用车内(文中简称车内)空气质量污染源、管控项目及对应检测方法,整车制造商车内空气质量性能开发模式与管控机制。     

有证标准样品的应用及其管理方法探讨

介绍了有证标准样品的定义和主要作用,详细阐述了有证标准样品在检测实验室的7个主要应用领域、正确使用指南和科学管理方法,以保证检测实验室检测结果的准确和量值溯源性。     

区块链与端边云技术赋能城市应急预警系统*

为解决现有城市应急预警系统（urban emergency early-warning system,UEES）存在的缺乏设备身份认证、数据共享性差、数据传输处理效率低、区域性智能自治能力不足等问题,根据区块链与端边云技术特点和现有系统的业务需求,提出区块链与端边云技术相融合的城市应急预警系统（UEES integrating blockchain and end-to-end cloud technology,UEES-BE）框架;对该框架存在的边缘节点认证与数据共享、区块链与边缘智能、边云协同分类分级分布式存储3个关键问题进行探讨;以城市内涝灾害预警为例,将区块链与端边云技术与城市内涝灾害预警系统业务相结合,提出4点优化建议。结果表明:区块链和端边云技术理论上可实现城市灾害安全、共享、实时、智能的预警,对构建城市应急预警系统具有指导意义。     

CO2注气压力对CH4驱替特性影响实验研究*

为研究CO2驱替CH4过程中注气压力对气体解吸特性的影响,采用自主搭建的驱替实验平台,在0.6,0.8,1.0 MPa不同注气压力下进行驱替实验,研究CO2驱替CH4过程中煤层温度、气体浓度、置换效率和渗透率等变化规律。实验结果表明:提高CO2注气压力可提高CO2置换驱替煤层CH4的效果。随着注气压力增大,CH4累计解吸量增大,CO2突破时间越短,CO2封存量越大,置换效率升高,驱替比下降。注气压力为0.6,0.8,1.0 MPa时,CH4累计解吸量分别为90.2,94.1,97.8 L;CO2封存量分别为19.73,19.92,20.21 mL/g;置换效率由76.9%上升到80.2%再到82.9%,驱替比由3.28下降到3.17再到3.09。注气驱替CH4过程中煤层温度升高,可分为低速升温、高速升温和趋于平缓阶段。煤层温度最高变化量分别为9.4,11.5,12.7 ℃。同一注气压力下,煤层渗透率变化可分为缓慢增长、急剧下降和趋于稳定阶段。     

磁化荷电水雾最佳降尘参数确定实验研究*

为实现对煤尘的有效防控,进一步提高磁化水降尘性能,提出磁化荷电喷雾降尘技术,通过研究液滴在磁化、荷电情况下的受力,揭示磁化荷电喷雾降尘机理;通过自主搭建的动、静态综合除尘实验平台,研究不同磁化强度、荷电电压下溶液表面张力和雾滴粒径的变化规律,进而确定最佳雾化参数。研究结果表明:磁化荷电后的溶液表面张力和雾滴粒径随磁化强度、荷电电压的增大呈现先下降而后上升,最后趋于平稳。荷电电压为9 kV、磁化强度为350 mT时达到最佳效果,此时,与清水相比全尘降尘效率达到92.79%、提高69.63%,呼尘降尘效率达到78.59%、提高94.01%。磁化荷电的溶液表面张力降低,破碎时所做表面功更小,雾化后液滴粒径更小更均匀,与尘粒接触面积增大,可提高捕尘效率,改善矿井环境。