Microwave-assisted continuous flow phytosynthesis of silver nanoparticle/reduced graphene oxide composites and related visible light catalytic performance

The creation of an environmentally friendly synthesis method for silver nanomaterials (AgNPs) is an urgent concern for sustainable nanotechnology development. In the present study, a novel straightforward and green method for the preparation of silver nanoparticle/reduced graphene oxide (AgNP/rGO) composites was successfully developed through the combination of phytosynthesis, continuous flow synthesis and microwave-assistance. Oriental persimmon (Diospyros kaki Thunb.) extracts were used as both plant reducing and capping agents for fast online synthesis of AgNP/rGO composites. The experimental parameters were optimized and the morphologies of the prepared materials were investigated. The characterization results reveal that spherical AgNPs were quickly synthesized and uniformly dispersed on rGO sheets using the proposed online system. Fourier transform infrared spectroscopy analysis confirmed that phenols, flavonoids, and other substances in the plant extracts played a decisive role in the synthesis of AgNP/rGO composites. Using sodium borohydride (NaBH₄) degradation of p-nitrophenol (4-NP) as a model, the catalytic activity of the prepared AgNP/rGO materials was evaluated. The complete degradation of 4-NP was achieved within 12 min through the use of AgNP/rGO materials, and the composite had a much better catalytic activity than the bare AgNPs and rGO had. Compared with the conventional chemical method, our online method is facile, fast, cost-efficient, and environmentally friendly.     

Identification and characterization of Fe3O4/peroxodisulfate advanced oxidation products from sulfameter

Sulfonamides (SAs) are one of the most widely used antibiotics and their residuals in the environment could cause some negative environmental issues. Advanced oxidation such as Fenton-like reaction has been widely applied in the treatment of SAs polluted water. Degradation rates of 95%-99.7% were achieved in this work for the tested 8 SAs, including sulfisomidine, sulfameter (SME), phthalylsulfathiazole, sulfamethoxypyridazine, sulfamonomethoxine, sulfisoxazole, sulfachloropyridazine, and sulfadimethoxine, in the Fe₃O₄/peroxodisulfate (PDS) oxidation system after the optimization of PDS concentration and pH. Meanwhile, it was found that a lot of unknown oxidation products were formed, which brought up the uncertainty of health risks to the environment, and the identification of these unknown products was critical. Therefore, SME was selected as the model compound, from which the oxidation products were never elucidated, to identify these intermediates/products. With liquid chromatography-high resolution tandem mass spectrometry (LC-HRMS/MS), 10 new products were identified, in which 2-amino-5-methoxypyrimidine (AMP) was confirmed by its standard. The investigation of the oxidation process of SME indicated that most of the products were not stable and the degradation pathways were very complicated as multiple reactions, such as oxidation of the amino group, SO₂ extrusion, and potential cross-reaction occurred simultaneously. Though most of the products were not verified due to the lack of standards, our results could be helpful in the evaluation of the treatment performance of SAs containing wastewater.     

Relationships between regulated DBPs and emerging DBPs of health concern in U.S. drinking water

A survey was conducted at eight U.S. drinking water plants, that spanned a wide range of water qualities and treatment/disinfection practices. Plants that treated heavily-wastewater-impacted source waters had lower trihalomethane to dihaloacetonitrile ratios due to the presence of more organic nitrogen and HAN precursors. As the bromide to total organic carbon ratio increased, there was more bromine incorporation into DBPs. This has been shown in other studies for THMs and selected emerging DBPs (HANs), whereas this study examined bromine incorporation for a wider group of emerging DBPs (haloacetaldehydes, halonitromethanes). Moreover, bromine incorporation into the emerging DBPs was, in general, similar to that of the THMs. Epidemiology studies that show an association between adverse health effects and brominated THMs may be due to the formation of brominated emerging DBPs of heath concern. Plants with higher free chlorine contact times before ammonia addition to form chloramines had less iodinated DBP formation in chloraminated distribution systems, where there was more oxidation of the iodide to iodate (a sink for the iodide) by the chlorine. This has been shown in many bench-scale studies (primarily for iodinated THMs), but seldom in full-scale studies (where this study also showed the impact on total organic iodine. Collectively, the THMs, haloacetic acids, and emerging DBPs accounted for a significant portion of the TOCl, TOBr, and TOI; however, ∼50% of the TOCl and TOBr is still unknown. The correlation of the sum of detected DBPs with the TOCl and TOBr suggests that they can be used as reliable surrogates.     

MoS2 quantum dots based MoS2/HKUST-1 composites for the highly efficient catalytic oxidation of elementary mercury

Due to the ever-tightening regulation on mercury emission in recent decades, there is an urgent need to develop novel materials for the removal of elemental mercury at coal-fired power plants. In this study, a series of MoS₂ quantum dots (QDs)-based MoS₂/HKUST-1 composite materials were prepared. It is found that MoS₂ QDs were encapsulated by HKUST-1 and enhanced the crystallinity and specific surface area of HKUST-1. The MoS₂/HKUST-1 showed excellent performance in catalytic oxidation of Hg⁰ as compared with pristine HKUST-1. It is found that surface layer of lattice oxygens is active and participates in Hg⁰ oxidation, while the consumption of surface oxygens then leads to the formation of oxygen vacancies on the surface. These vacancies are effective in the adsorption and dissociation of O₂, which subsequently participates in the oxidation of Hg⁰. Moreover, the study on the influence of commonly seen gas components, such as SO₂, NO, NH₃ and H₂O, etc., on Hg⁰ oxidation demonstrated that synergistic effects exist among these gas species. It is found that the presence of NO promotes the oxidation of Hg⁰ using oxygen as the oxidant.     

Removal of hexavalent chromium from water by Z-scheme photocatalysis using TiO2 (rutile) nanorods loaded with Au core–Cu2O shell particles

All-solid-state Z-scheme photocatalysts, containing Cu₂O, TiO₂ (rutile), and Au as the electron mediator, were prepared and applied to the reduction of Cr(VI) in aqueous solutions. The Cu₂O–Au–TiO₂ composites were prepared by loading Au core–Cu₂O shell hemisphere particles on TiO₂ (rutile) nanorods using a two-step photocatalytic deposition process. Under ultraviolet–visible (UV–vis) light illumination, the Cu₂O–Au–TiO₂ composites exhibited higher photocatalytic Cr(VI) reduction activities than those exhibited by single TiO₂ (rutile) and Cu₂O. In this reaction, a precipitate containing Cr, which was considered to be Cr(OH)₃, was deposited site-selectively on the Au core–Cu₂O shell particles of the composites, indicating that the reduction site of the composite was Cu₂O, and the reaction proceeded according to the Z-scheme. The Cu₂O–Au–TiO₂ composites also exhibited photocatalytic activity under visible light illumination. The oxidation state of Cu in the Cu₂O–Au–TiO₂ composite gradually changed from Cu(I) to Cu(II) during the photocatalytic Cr(VI) reduction. However the composite maintained its high photocatalytic performance even after oxidation. The role of Au in the Cu₂O–Au–TiO₂ composite was examined by comparing the properties of the Cu₂O–Au–TiO₂ composite with those of the Cu₂O–TiO₂ composite prepared via direct Cu₂O deposition on TiO₂.     

Predicting geogenic groundwater fluoride contamination throughout China

Endemic fluorosis exists in almost all provinces of China. The long-term ingestion of groundwater containing high concentrations of fluoride is one of the main causes of fluorosis. We used artificial neural network to model the relationship between groundwater fluoride concentrations from throughout China and environmental variables such as climatic, geological. and soil parameters as proxy predictors. The results show that the accuracy and area under the receiver operating characteristic curve of the model in the test dataset are 80.5% and 0.86%, respectively, and climatic variables are the most effective predictors. Based on the artificial neural network model, a nationwide prediction risk map of fluoride concentrations exceeding 1.5 mg/L with a 0.5 × 0.5 arc minutes resolution was generated. The high risk areas are mainly located in western provinces of Xinjiang, Tibet, Qinghai, and Sichuan, and the northern provinces of Inner Mongolia, Hebei and Shandong. The total number of people estimated to be potentially at risk of fluorosis due to the use of untreated high fluoride groundwater as drinking water is about 89 million, or 6% of the population. The high fluoride groundwater risk map helps the authorities to prioritize areas requiring mitigation measures and thus facilitates the implementation of water improvement and defluoridation projects.     

Alterations in microbial community during the remediation of a black-odorous stream by acclimated composite microorganisms

Microbial application is an efficient, economical, and ecofriendly method for remediating black-odorous rivers. In this study, the field treatment effect and microbial community changes were monitored during remediation by the acclimated complex microorganisms of a typical black-odorous stream. After the treatment, the total phosphorus and ammonia contents decreased by 74.0% and 76.3% and the concentrations of dissolved oxygen increased from 1.65 to 4.90 mg/L, indicating the effectiveness of the acclimated composite microorganisms. The proportion of Bacteroidetes decreased significantly by 48.1% and that of Firmicutes increased by 2.23% on average, and the microbial diversity index first increased and then tended to be uniform. Redundancy analysis demonstrated that the pH, dissolved oxygen, and oxidation-reduction potential together determined the composition of the microbial communities (p < 0.05). These findings showed that the acclimated composite microorganisms can effectively remediate the black odor.     

Phenol degradation in waters with high iodide level by layered double hydroxide-peroxodisulfate: Pathways and products

Recently, layered double hydroxide-peroxodisulfate (LDH-PDS) as an advanced oxidation system can effectively remove organics by the pathway of free radical. However, little has been known if there is a potential risk regarding the formation of high toxic iodine byproducts through another pathway when LDH-PDS is used in high iodide waters at coastal areas. Therefore, this study investigated phenol degradation pathways and transformation products to evaluate both removal mechanism and potential risk by LDH-PDS in high iodide waters. The results showed that in LDH-PDS system, with the degradation of PDS, phenol degraded till below detection limit in 1 hr in the presence of iodide, while PDS and phenol were hardly degraded in the absence of iodide, indicating iodide accelerated the transformation of PDS and the degradation of phenol. What is more, it reached the highest phenol removal efficiency under the condition of 100 mg/L LDH, 0.1 mmol/L PDS and 1.0 mmol/L iodide. In LDH-PDS system, iodide was rapidly oxidized by the highly active interlayer PDS, resulting in the formation of reactive iodine including hypoiodic acid, iodine and triiodide instead of free radicals, which contributed rapid degradation of phenol. However, unfortunately toxic iodophenols were detected. Specifically, 2-iodophenol and 4-iodophenol were formed firstly, afterwards 2,4-diiodophenol and 2,6-diiodophenol were produced, and finally iodophenols and diiodophenols gradually decreased and 2,4,6-Triiodophenol were produced. These results indicated that LDH-PDS should avoid to use in high iodide waters to prevent toxic iodine byproduct formation although iodide can accelerate phenol degradation.     

Highly efficient P uptake by Fe3O4 loaded amorphous Zr-La (carbonate) oxides: Electrostatic attraction, inner-sphere complexation and oxygen vacancies acceleration effect

Bimetallic oxides composites have received an increasing attention as promising adsorbents for aqueous phosphate (P) removal in recent years. In this study, a novel magnetic composite MZLCO was prepared by hybridizing amorphous Zr-La (carbonate) oxides (ZLCO) with nano-Fe₃O₄ through a one-pot solvothermal method for efficient phosphate adsorption. Our optimum sample of MZLCO-45 exhibited a high Langmuir maximum adsorption capacity of 96.16 mg P/g and performed well even at low phosphate concentration. The phosphate adsorption kinetics by MZLCO-45 fitted well with the pseudo-second-order model, and the adsorption capacity could reach 79% of the ultimate value within the first 60 min. The phosphate adsorption process was highly pH-dependent, and MZLCO-45 performed well over a wide pH range of 2.0-8.0. Moreover, MZLCO-45 showed a strong selectivity to phosphate in the presence of competing ions (Cl⁻, NO₃⁻, SO₄²⁻, HCO₃⁻, Ca²⁺, and Mg²⁺) and a good reusability using the eluent of NaOH/NaCl mixture, then 64% adsorption capacity remained after ten recycles. The initial 2.0 mg P/L in municipal wastewater and surface water could be efficiently reduced to below 0.1mg P/L by 0.07 g/L MZLCO-45, and the phosphate removal efficiencies were 95.7% and 96.21%, respectively. Phosphate adsorption mechanisms by MZLCO-45 could be attributed to electrostatic attraction and the inner-sphere complexation via ligand exchange forming Zr/La-O-P, -OH and CO₃²⁻ groups on MZLCO-45 surface played important roles in the ligand exchange process. The existence of oxygen vacancies could accelerate the phosphate absorption rate of the MZLCO-45 composites.     

Evaluation of disinfection byproducts for their ability to affect mitochondrial function

In the race to deliver clean water to communities through potable water reuse, disinfection and water quality assessment are and will continue to be fundamental factors. There are over 700 disinfection byproducts (DBPs) in water; evaluating each compound is practically impossible and very time consuming. A bioanalytical approach could be an answer to this challenge. In this work, the response of four major classes of DBPs toward mitochondrial membrane potential (ΔΨm) and cytoplasmic adenosine triphosphate (C-ATP) was investigated with human carcinoma (HepG2) cells. Within 90 min of cell exposure, only the haloacetic acid (HAA) mixture caused a cytotoxic response as measured by C-ATP. All four groups (haloacetonitriles (HANs), trihalomethanes (THMs), nitrosamines (NOAs), and HAAs) responded well to ΔΨm, R² > 0.70. Based on the half-maximum concentration that evoked a 50% response in ΔΨm, the response gradient was HANs >> HAAs ∼ THM > NOAs. The inhibition of the ΔΨm by HANs is driven by dibromoacetonitrile (DBAN), while dichloroacetonitrile (DCAN) did not cause a significant change in the ΔΨm at less than 2000 µM. A mixture of HANs exhibited an antagonistic behavior on the ΔΨm compared to individual compounds. If water samples are concentrated to increase HAN concentrations, especially DBAN, then ΔΨm could be used as a biomonitoring tool for DBP toxicity.