Inverse modeling of multicomponent reactive transport through single and dual porosity media

Compacted bentonite is foreseen as buffer material for high-level radioactive waste in deep geological repositories because it provides hydraulic isolation, chemical stability, and radionuclide sorption. A wide range of laboratory tests were performed within the framework of FEBEX (Full-scale Engineered Barrier EXperiment) project to characterize buffer properties and develop numerical models for FEBEX bentonite. Here we present inverse single and dual-continuum multicomponent reactive transport models of a long-term permeation test performed on a 2.5 cm long sample of FEBEX bentonite. Initial saline bentonite porewater was flushed with 5.5 pore volumes of fresh granitic water. Water flux and chemical composition of effluent waters were monitored during almost 4 years. The model accounts for solute advection and diffusion and geochemical reactions such as aqueous complexation, acid-base, cation exchange, protonation/deprotonation by surface complexation and dissolution/precipitation of calcite, chalcedony and gypsum. All of these processes are assumed at local equilibrium. Similar to previous studies of bentonite porewater chemistry on batch systems which attest the relevance of protonation/deprotonation on buffering pH, our results confirm that protonation/deprotonation is a key process in maintaining a stable pH under dynamic transport conditions. Breakthrough curves of reactive species are more sensitive to initial porewater concentration than to effective diffusion coefficient. Optimum estimates of initial porewater chemistry of saturated compacted FEBEX bentonite are obtained by solving the inverse problem of multicomponent reactive transport. While the single-continuum model reproduces the trends of measured data for most chemical species, it fails to match properly the long tails of most breakthrough curves. Such limitation is overcome by resorting to a dual-continuum reactive transport model.     

斜拉桥支架法施工的自适应安全监测技术

介绍自适应控制的基本原理及其运用现状。根据斜拉桥的实际情况选用自适应控制形式,在主要部位埋设传感器和相关的测试仪器,明确监测时间并在实施中严格执行。依据实测结果对标高、应力、容重等参数按实际情况进行修正,得出施工过程中的受力状态,从而调整施工。算出主梁各节点理论施工预拱度变化曲线等数据并与实测值进行比较,反复修正。自适应法达到了仿真计算与实际施工过程保持一致的最佳施工控制效果。绥芬河斜拉桥的施工证明,自适应法是一种很适合斜拉桥支架施工安全监测的技术,值得推广应用。     

盐酸溶液改性蛭石对气态单质汞的吸附性能

采用盐酸溶液对蛭石进行浸渍处理,考察了盐酸溶液改性蛭石对气态单质汞的吸附能力。研究结果表明：盐酸溶液改性蛭石对气态单质汞的吸附效果好于未改性蛭石,盐酸浓度为4．0mol／L时,盐酸溶液改性蛭石对气态单质汞的吸附效果较佳;进气中气态单质汞的质量浓度越高,盐酸溶液改性蛭石对气态单质汞的去除率越低;适当提高吸附温度对盐酸溶液改性蛭石吸附气态单质汞较有利;降低蛭石粒径,盐酸溶液改性蛭石对气态单质汞的去除率提高。     

阳离子表面活性剂十六烷基三甲基溴化铵对酞酸酯类化合物增溶性研究

用阳离子表面活性剂十六烷基三甲基溴化铵对六种酞酸酯类化合物(五种脂肪链酞酸酯和一种苯基酞酸酯)进行了增溶性实验．结果表明,在表观浓度(Ｃｓ)小于临界胶速浓度(ＣＭＣ)时,十六烷基三甲基溴化铵对四种酞酸酯(ＤＭＰ和ＤＰｈＰ除外)有一定程度的增溶作用;当Ｃｓ大于ＣＭＣ时,对六种化合物的增溶性显著增强．其增溶性(Ｓｔ/Ｓｗ)随Ｃｓ增大而线性递增:当Ｃｓ＜ＣＭＣ时,Ｓｔ/Ｓｗ＝ａ＋Ｋｍｎ·Ｃｓ,ｒ＞０．９０,ｎ＝５;当Ｃｓ＞ＣＭＣ时,Ｓｔ/Ｓｗ＝ａ＋Ｋｍｃ·Ｃｓ,ｒ＞０．９９,ｎ＝５． 各化合物增溶系数随各自固有水溶性(Ｓｗ)减小而增大(苯基酞酸酯有所反常),ｌｇＫｍｎ和ｌｇＫｍｃ与各自ｌｇｌ/Ｓｗ具有良好的线性正相关性．本文进一步对增溶机理进行了分析解释．     

垂直面绿化植物遮阳系数与叶面积指数研究

比较、分析了农业研究中提出的叶面积指数LAI与用于建筑节能领域的垂直面绿化植物叶片遮阳系数SCPVW两个概念的异同和各自的应用范围。指出城市绿化采用水平或垂直绿化方式时,由于下垫面差异,植物叶片的遮阳系数应当分别采用LAI和SCPVW进行计算。     

南京市地铁车站氡浓度水平的初步调查

采用静电收集氡子体法对南京市地铁车站环境中氡浓度进行了调查,初步掌握了南京市地铁站重点区域的氡浓度放射性水平,按照联合国原子辐射效应科学委员会推荐的评价方法估算氡浓度对地铁内工作人员人均年有效照射剂量。对地铁站新建和扩建项目的机械通风设计,为工作人员和公众的内照射剂量水平估算等提供依据。     

“加压上浮法”应急除藻技术在水源地的应用示范

近年来,太湖蓝藻水华问题日趋严峻,除藻技术是解决该问题最直接而有效的手段,对现有各类除藻技术进行了比较,并以"加压上浮法"应急除藻技术在苏州阳澄湖局部地区的示范工程为例,介绍了该方法的技术原理、技术实现以及在工程应用中的实际意义,为同行在水源地或特殊功能区除藻技术的应用提供参考。     

钝化材料对Cd污染农田修复及其后效探究

在田间试验条件下,考察不同钝化材料对农田Cd轻度污染水稻修复效果及稻麦轮作后第二年水稻修复后效.结果表明,在轻度Cd污染农田中,各钝化材料处理均能不同程度降低土壤有效态Cd含量和水稻籽粒中Cd含量.其中,在钝化材料施用当季和稻麦轮作后第二季水稻中修复效果最好的处理为中量纳米材料处理和石灰配施中量纳米材料处理,这两种处理...     

Novel Polymeric Materials from Biological Oils

A variety of novel polymeric materials ranging from elastomers to tough, rigid plastics have been prepared by the cationic copolymerization of regular soybean oil, low-saturation soybean oil, or conjugated low-saturation soybean oil with various alkene commonomers. Using appropriate compositions and reaction conditions, 70–100% of the soybean oil is covalently incorporated into the cross-linked polymer networks, contributing significantly to cross-linking during copolymerization. The resulting thermosets exhibit thermophysical and mechanical properties that are competitive with those of their petroleum-based counterparts. In addition, good damping and shape memory properties have been obtained by controlling the degree of cross-linking and the rigidity of the polymer backbone. New materials with similar characteristics have also been produced from other biological oils, including tung, and fish oils using the same technique. The new, more valuable properties of these bioplastics suggest numerous promising applications of these novel polymeric materials.