福建省工业CO2排放效率评价研究

运用基于非期望产出、非径向、非角度的SBM-DEA模型,对2005年-2014年福建省工业35个行业CO2排放效率进行评价,然后通过行业效率值动态聚类深入揭示福建省工业行业CO2排放特质,最后提出福建省工业低碳发展的建议.研究表明:福建省工业存在较大的节能减排空间,高效率行业具有技术进步显著的优势,中效率行业效率值受贸易结构影响,低效率行业普遍存在产能过剩的问题.因此,福建省工业低碳转型需要调整能源消费结构、推进低碳技术进步、优化贸易结构、消化过剩产能.     

KrBr*准分子灯直接光解一甲胺气体

研究了正弦电源驱动的207 nm KrBr*准分子灯光解气相中的一甲胺(MA).考察了降解的影响因素(气体流速、初始浓度、输入功率),测定了灯的输入功率和辐射光谱.为了评价光解过程,对去除效率、能率、碳平衡和CO2的选择性这4个参数进行了研究.结果表明,去除率随着灯的输入功率升高、气体流速的降低以及气体初始浓度的升高而升高.能率与一甲胺初始浓度呈正相关性,输入功率为65.1 W时能率最高.输入功率升高,气体流速下降,碳平衡和CO2选择性都略有升高.当灯的输入功率为79.8 W,气体流速9.0 m3·h-1,初始浓度为2 897 mg·m-3,一甲胺去除率为56.8%,能率为185.6g·(kW·h)-1,相应的碳平衡和CO2选择性为16.8%和10.3%.最后,利用气质联用仪测定了一甲胺降解的产物,结合一甲胺的吸收光谱,推测了一甲胺的光解机制.     

基于多区域投入产出(MRIO)的中国区域居民消费碳足迹分析

近年来,居民消费活动和环境的关系逐渐受到关注,而与温室气体排放相关的研究更是其中的热点.因此,本文采用“居民消费碳足迹”概念来定义特定居民消费活动所导致的直接和间接温室气体排放的总和,主要包括CO2、CH4、N2O3种温室气体;构建了基于环境扩展的多区域投入产出(Multiregional input-output,MRIO)模型的碳足迹核算方法,并以2007年中国8个区域为例对其居民消费碳足迹的数量、构成、分布及转移进行了分析.结果显示,2007年全国居民消费碳足迹总量达到31.74亿t(以CO2当量计).此外,碳足迹还呈现出区域差异明显、间接排放大于直接排放、城乡差距过大等特征.人均碳足迹方面,发展水平较高的京津、东部沿海地区明显高于相对滞后的西北、西南区域.研究还对碳足迹的区域分布和转移进行了深入探讨.结果发现,东北、京津、西北和西南区域转移收支为负,表示这些区域为其他区域承担的排放大于其他区域为其承担的排放;剩余的北部沿海、东部沿海、南部沿海和中部区域情况则正好相反.这些结果对现阶段中国制定具体区域消费政策或分配碳减排责任等具有参考价值;本研究的方法论也适用于研究其他环境因子及足迹因子与居民消费的关系.     

活性污泥絮体的分形结构分析

通过小角光散射(small-angle light scattering,SALS)实验确定出活性污泥絮体的分形区域,对絮体粒径分布进行了拟合分析,采用原子力显微镜(AFM)和激光共聚焦扫描显微镜(CLSM)对絮体在不同尺度下的形貌进行了观测.结果显示,污泥絮体是由一系列的絮团结合而成,絮体表面凹凸不平,有各种"孔洞","缝隙",絮体内部存在一系列的孔隙.较大尺度的絮体同时存在多种孔道结构,构成絮体中营养物和水流的运输通道;污泥絮体在0.5～50μm之间具有明显的分形结构,表明活性污泥絮体在较小的粒径时已经具有一定的分形特征,活性污泥的粒度分布属于Gamma分布方式,证明污泥絮体的成长过程是一种絮团-絮团的凝聚过程.     

垦殖对湿地土壤有机碳垂直分布及可溶性有机碳截留的影响

通过测定和计算兴凯湖地区沼泽湿地及由其垦殖而来的旱田和水田土壤剖面有机碳含量和密度及土壤剖面不同深度土壤溶液中可溶性有机碳含量,分析了垦殖对兴凯湖周边沼泽湿地土壤有机碳垂直分布及土壤剖面截留可溶性有机碳的影响.结果表明,垦殖显著影响湿地0～40 cm土壤有机碳含量,大豆田和水稻田0～10、10～20、20～30、30～40 cm土壤有机碳含量与湿地相比分别降低了79.07%和82.01%、79.01%和82.28%、79.86%和92.90%、37.49%和78.05%;40 cm以下土层土壤有机碳含量垦殖前后差异不显著.大豆田和水稻田有机碳密度相比沼泽湿地分别降低了25.50%和47.35%,但三者1 m深土壤中大部分的有机碳均是储存在0～50 cm土层中.垦殖前后土壤有机碳含量与深度之间的关系均可用指数函数来描述,垦殖改变了土壤有机碳含量但并未改变其随土壤深度的变化规律.垦殖为大豆田土壤剖面对可溶性有机碳的截留效果较湿地和水稻田更明显,沼泽湿地和水稻田对可溶性有机碳的截留效果大致相当.     

Adsorption of lead on multi-walled carbon nanotubes with different outer diameters and oxygen contents: Kinetics, isotherms and thermodynamics

The effects of different outer diameters and surface oxygen contents on the adsorption of heavy metals onto six types of multi-walled carbon nanotubes (MWCNTs) were investigated in an aqueous solution and lead was chosen as a model metal ion. The results indicated that the percentage removal and adsorption capacity of lead remarkably increased with decreasing outer diameter due to larger specific surface area (SSA). The SSA-normalized maximum adsorption capacity (qm /SSA) and SSA-normalized adsorption coefficient (Kd /SSA) were strongly positively correlated with surface oxygen content, implying that lead adsorption onto MWCNTs significantly increases with the rise of oxygen content and decreases with decreasing SSA. The calculated thermodynamic parameters indicated that adsorption of lead on MWCNTs was endothermic and spontaneous. When the oxygen content of MWCNTs increased from 2.0% to 5.9%, the standard free energy (△ G0 ) became more negative, which implied that the oxygenated functional groups increased the adsorption affinity of MWCNTs for lead. Through calculation of enthalpy (△ H0 ), G0 and free energy of adsorption (Ea ), lead adsorption onto MWCNTs was recognized as a chemisorption process. The chemical interaction between lead and the phenolic groups of MWCNTs could be one of the main adsorption mechanisms due to highly positive correlations between the phenolic groups and K d /SSA or q m /SSA.     

Cost-performance analysis of nutrient removal in a full-scale oxidation ditch process based on kinetic modeling

A full-scale oxidation ditch process for treating sewage was simulated with the ASM2d model and optimized for minimal cost with acceptable performance in terms of ammonium and phosphorus removal. A unified index was introduced by integrating operational costs (aeration energy and sludge production) with effluent violations for performance evaluation. Scenario analysis showed that,in comparison with the baseline (all of the 9 aerators activated), the strategy of activating 5 aerators could save aeration energy significantly with an ammonium violation below 10%. Sludge discharge scenario analysis showed that a sludge discharge flow of 250–300 m3/day (solid retention time (SRT), 13–15 days) was appropriate for the enhancement of phosphorus removal without excessive sludge production. The proposed optimal control strategy was: activating 5 rotating disks operated with a mode of "111100100" ( "1"represents activation and "0" represents inactivation) for aeration and sludge discharge flow of 200 m3/day (SRT, 19 days). Compared with the baseline, this strategy could achieve ammonium violation below 10% and TP violation below 30% with substantial reduction of aeration energy cost (46%) and minimal increment of sludge production (< 2%). This study provides a useful approach for the optimization of process operation and control.     

Biodegradation of 2-methylquinoline by Enterobacter aerogenes TJ-D isolated from activated sludge

Bacterial strain Enterobacter aerogenes TJ-D capable of utilizing 2-methylquinoline as the sole carbon and energy source was isolated from acclimated activated sludge under denitrifying conditions. The ability to degrade 2-methylquinoline by E. aerogenes TJ-D was investigated under denitrifying conditions. Under optimal conditions of temperature (35℃) and initial pH 7, 2-methylquinoline of 100 mg/L was degraded within 176 hr. The degradation of 2-methylquinoline by E. aerogenes TJ-D could be well described by the Haldane model (R² > 0.91). During the degradation period of 2-methylquinoline (initial concentration 100 mg/L), nitrate was almost completely consumed (the removal efficiency was 98.5%), while nitrite remained at low concentration (< 0.62 mg/L) during the whole denitrification period. 1,2,3,4-Tetrahydro-2-methylquinoline, 4-ethyl-benzenamine, N-butyl-benzenamine, N-ethyl-benzenamine and 2,6-diethyl-benzenamine were metabolites produced during the degradation. The degradation pathway of 2-methylquinoline by E. aerogenes TJ-D was proposed. 2-Methylquinoline is initially hydroxylated at C-4 to form 2-methyl-4-hydroxy-quinoline, and then forms 2-methyl-4-quinolinol as a result of tautomerism. Hydrogenation of the heterocyclic ring at positions 2 and 3 produces 2,3-dihydro-2-methyl-4-quinolinol. The carbon-carbon bond at position 2 and 3 in the heterocyclic ring may cleave and form 2-ethyl-N-ethyl-benzenamine. Tautomerism may result in the formation of 2,6-diethyl-benzenamine and N-butyl-benzenamine. 4-Ethyl-benzenamine and N-ethyl-benzenamine were produced as a result of losing one ethyl group from the above molecules.     

Influences of perfluorooctanoic acid on the aggregation of multi-walled carbon nanotubes

The aggregation of multi-walled carbon nanotubes (MWCNTs) in the aqueous phase not only inhibits their extensive utilization in various aspects but also dominates their environmental fate and transport.The role of surfactants at low concentration in the aggregation of MWCNTs has been studied,however the effect of perfluorinated surfactants at low concentration is uncertain.To understand this interfacial phenomenon,the influences of perfluorooctanoic acid (PFOA),and sodium dodecyl sulfate (SDS) as a control,on MWCNT aggregation in the aqueous phase were examined by the UV absorbency method.Influences of pH and cationic species on the critical coagulation concentration (CCC) value were evaluated.The CCC values were dependent on the concentration of PFOA,however a pronounced effect of SDS concentration on the CCC values was not observed.The CCC values of the MWCNTs were 51.6 mmol/L in NaCl and 0.28 mmol/L in CaCl 2 solutions,which suggested pronounced differences in the effects of Na+ and Ca2+ ions on the aggregation of the MWCNTs.The presence of both PFOA and SDS significantly decreased the CCC values of the MWCNTs in NaCl solution.The aggregation of the MWCNTs took place under acidic conditions and was not notably altered under neutral and alkaline conditions due to the electrostatic repulsion of deprotonated functional groups on the surface of the MWCNTs.     

Competitive sorption between 17α-ethinyl estradiol and bisphenol A/4-n-nonylphenol by soils

The sorption of 17α-ethinyl estradiol(EE2),bisphenol A(BPA),and 4-n-nonylphenol(NP) in single systems and the sorption of EE2 with different initial aqueous concentrations of BPA or NP were examined using three soils.Results showed that all sorption isotherms were nonlinear and fit the Freundlich model.The degree of nonlinearity was in the order BPA(0.537-0.686) > EE2(0.705-0.858) > NP(0.875-0.0.951) in single systems.The isotherm linearity index of EE2 sorption calculated by the Freundlich model for Loam,Silt Loam and Silt increased from 0.758,0.705 and 0.858,to 0.889,0.910 and 0.969,respectively,when BPA concentration increased from 0 to 1000 μg/L,but the effect of NP was comparably minimal.Additionally,EE2 significantly suppressed the sorption of BPA,but insignificantly suppressed that of NP.These findings can be attributed to the difference of sorption affinity of EE2,NP and BPA on the hard carbon(e.g.,black carbon) of soil organic matter that dominated the sorption in the low equilibrium aqueous concentration range of endocrine-disrupting chemicals(EDCs).Competitive sorption among EDCs presents new challenges for predicting the transport and fate of EDCs under the influence of co-solutes.