核电厂大型自然通风冷却塔对气载流出物扩散的影响

为深入研究大型自然通风冷却塔及其湿热羽对内陆核电厂气载流出物扩散影响,应用计算流体力学软件STAR-CCM+提供的k-ε湍流模型模拟了单一冷却塔的运行和停机对不同位置、不同释放高度污染物扩散的影响,结果表明：当释放高度为10m,释放点位于停机冷却塔迎风侧时,释放点下风向的地面轴线弥散因子相比于没有冷却塔时普遍降低1/3~1/2.当释放高度为75m,冷却塔运行时,若释放点位于冷却塔迎风侧时,轴线弥散因子相比于没有冷却塔时普遍增大1~2倍;若释放点位于冷却塔背风侧,则相比于没有冷却塔时普遍降低约1/2.当冷却塔停机时,无论75m高度释放点位于迎风侧还是背风侧,其轴线弥散因子均高于没有冷却塔时.当迎风侧释放高度达到150m时,在释放点下风向约800m的范围内,冷却塔湿热羽使得轴线弥散因子显著增大,但到了800m范围以外,冷却塔湿热羽使得轴线弥散因子减小.     

粉尘在巷道中的紊流传递分析

建立的粉尘在巷道中的传递方程是一个二维平流扩散输运方程。在巷道顶底板为吸收壁的条件下，导出了粉尘浓度分布函数。传统的工业沉降室沉降效率公式（横向混合模型）只是论文所列方程的一个特例。降低紊流强度和减小紊流扩散系数和纵向弥散系数均可提高沉降效率     

Modelling of dust lifting process behind propagating shock wave

Dust dispersion from a layer is a complicated problem, which has not been completely solved yet, especially if an Eulerian–Eulerian approach has to be used to model the two-phase dusty flow. In previous investigation, a phenomenological model of the dust dispersion process from a layer was developed, but the evaluation of the model revealed some weaknesses. In the current paper, the model of the dust dispersion process was presented and three improvements of the model were studied: Saffman force, Magnus force and particles collisions. The implementation of Magnus and Saffman forces into the code did not improve the numerical results and it was shown that it had very little influence on the dust lifting process, in case the phenomenological model of the layer is used. Some explanations were proposed in the paper. Besides, an empirical model of particles collisions was also added to the code and its influence on the results was studied. It was shown that the particles collisions model improved the obtained results, but further modifications are to be studied in the future.     

Quantifying methane emission from fugitive sources by combining tracer release and downwind measurements – A sensitivity analysis based on multiple field surveys

Using a dual species methane/acetylene instrument based on cavity ring down spectroscopy (CRDS), the dynamic plume tracer dispersion method for quantifying the emission rate of methane was successfully tested in four measurement campaigns: (1) controlled methane and trace gas release with different trace gas configurations, (2) landfill with unknown emission source locations, (3) landfill with closely located emission sources, and (4) comparing with an Fourier transform infrared spectroscopy (FTIR) instrument using multiple trace gasses for source separation. The new real-time, high precision instrument can measure methane plumes more than 1.2 km away from small sources (about 5 kg h^?1) in urban areas with a measurement frequency allowing plume crossing at normal driving speed. The method can be used for quantification of total methane emissions from diffuse area sources down to 1 kg per hour and can be used to quantify individual sources with the right choice of wind direction and road distance. The placement of the trace gas is important for obtaining correct quantification and uncertainty of up to 36% can be incurred when the trace gas is not co-located with the methane source. Measurements made at greater distances are less sensitive to errors in trace gas placement and model calculations showed an uncertainty of less than 5% in both urban and open-country for placing the trace gas 100 m from the source, when measurements were done more than 3 km away. Using the ratio of the integrated plume concentrations of tracer gas and methane gives the most reliable results for measurements at various distances to the source, compared to the ratio of the highest concentration in the plume, the direct concentration ratio and using a Gaussian plume model. Under suitable weather and road conditions, the CRDS system can quantify the emission from different sources located close to each other using only one kind of trace gas due to the high time resolution, while the FTIR system can measure multiple trace gasses but with a lower time resolution.     

CFD simulations of dust dispersion in the 20 L vessel: Effect of nominal dust concentration

Measurements of flammability and explosion parameters for dust/air mixtures require uniform dispersion of the dust cloud inside the test vessel. In a previous work, we showed that, in the standard 20 L sphere, the dust injection system does not allow generation of a uniform cloud, but rather high gradients of dust concentration are established. In this work, we used a previously validated three-dimensional CFD model to simulate the dust dispersion inside the 20 L sphere at different dust nominal concentrations (and fixed dust diameter). Results of numerical simulations have shown that, as the dust nominal concentration is increased, sedimentation prevails and, thus, when ignition is provided, the dust is mainly concentrated at the vessel walls.     

Validation of the UK Met. Office’s name model against the ETEX dataset

The ETEX 1 data set has been used to assess the performance of the UK Met Office’s long-range dispersion model NAME. In terms of emergency response modelling the model performed well, successfully predicting the overall spread and timing of the plume across Europe. However, in common with most other models, NAME overpredicted the observed concentrations. This is in contrast with other NAME validation studies which indicate either no significant bias or a tendency to underpredict concentrations. This suggests the reasons for overpredicting are specific to the ETEX situation. Explanations include inadequate vertical diffusion or transport, possible venting by convective activity, and experimental errors. An assessment of a range of advection schemes of varying complexity indicated no clear advantage, at present, in using more sophisticated random walk techniques at long range, a simple diffusion coefficient based scheme providing some of the best results. A brief look is also taken at a simulation of the more problematical ETEX 2 release.     

减推力起飞对NOx排放影响计算方法研究

伴随着航空公司对未来几年氮氧化物(NOx)排放量增长的预测,量化机场NOx排放量日益重要。根据国际民航组织认证的发动机排放数据,在研究推力对NOx排放的影响时,通常模拟4个推力级别:100%(起飞阶段)、85%(爬坡阶段)、30%(进近阶段)、7%(慢车阶段)。美国联邦航空局设计了模型——排放和扩散模拟系统,利用该模型对4个阶段分别进行模拟。结果表明,飞机在最大推力时产生的NOx量最多。分析了起飞阶段减推力下起飞对机场年NOx排放量的影响,通过排放和扩散模拟系统,研究了一系列算法,用于预测推力与NOx排放量的关系。     

Analysis of gas dispersion and ventilation within a comprehensive CAD model of an offshore platform via computational fluid dynamics

Maintaining an adequate air flow with a desired air quality that is free from hazardous gases is among the most important actions taken toward the improvement of safety in any process plant. Due to the increased focus on the consequences of existing hazardous material on safety, health, and the environment, air quality and sufficient ventilation within a plant has been increasingly considered in the design stage. This paper investigates and analyzes methane and hydrogen sulfite dispersion and the effect of air ventilation within a CAD model of an offshore platform using computation fluids dynamics (CFD). In addition, this method and its principals could be utilized in any other hazardous environment. Simulations of possible hazardous events along with solutions for preventing or reducing their probability are presented to better assess the data. These investigations are performed by considering hypothetical hazardous scenarios which consist of gas leakages from pipes and process equipment under different conditions. After drafting a precise and highly detailed CAD model of the plant and performing CFD simulations on this model, the results of gas behaviors, dispersion, distribution, accumulation, and its possible hazards are investigated and analyzed. The larger amount of details of the actual plant model in CFD simulation are obtained by using a combination of different methods and software. These include PDMS for 3-D drawing of the plan, Rinoceros for geometrical integration of the process equipment and facilities, and Sharc Harpoon which meshes the model. Moreover, the probability of inducing ignitable or toxic concentration of gases within the atmosphere and air ventilation of the unit is considered by these investigations.     

微纳米气液分散体系吸收NO

以模拟烟气为气源,去离子水为水源,通过微纳米气泡发生器形成微纳米气液分散体系,吸收模拟烟气中的NO,考察了多种因素对脱硝率(η)和气相体积总传质系数(KGa)的影响,分析了微纳米气液分散体系吸收NO的反应机理。结果表明:η和KGa随着进气NO体积分数和十二烷基苯磺酸钠(SDBS)质量浓度的提高而下降;随着吸收液初始pH的提高先降低后升高;随着进气O_2体积分数的增大而提高;随着吸收液温度的升高先提高后降低;控制进气NO体积分数为0.06%时,在吸收液初始pH为2.0、吸收剂为去离子水、吸收液温度为25℃、进气O_2体积分数为10%的最佳条件下,脱硝率可达81.0%。微纳米气液分散体系是通过产生羟基自由基从而对NO进行氧化吸收的。     

An alternative CFD tool for gas dispersion modelling of heavy gas

The numerical simulation of gas dispersion is of great importance in various areas of engineering such as optimisation, synthesis of chemical process, petroleum industry and process safety. The OpenFOAM (Open Field Operation and Manipulation) code is a free and open source computational fluid dynamics (CFD) program. The current research is focused on the development and customisation of a computational tool for handling gas dispersion of heavy gases, such a LNG and CO₂. The novel CFD tool relies on OpenFOAM framework. The core of the work is based on the OpenFOAM solver rhoReactingBuoyantFoam to handle gas dispersion. A series of CFD simulations has been performed for methane and CO₂. The source term of the former is modelled by HSM (Hybrid Switch Model). The model comprises contribution from HEM (Homogeneous Equilibrium Model) approach, frozen model and non-equilibrium model for CO₂ leak. The novel approach switches between equilibrium and non-equilibrium conditions based on the meta-stable parameter on the grounds of thermodynamics and experimental observations. Good agreement with experimental data is observed. Numerical findings for methane leakage from the proposed CFD tool are compared with experimental data and FLACS. Good agreement is observed.