黄孢原毛平革菌对印染废水脱色条件研究

根据黄孢原毛平革菌的生长和代谢特点,设计了不同废水浓度、不同菌龄、不同温度、不同转速和不同pH值条件,研究黄孢原毛平革菌对工业印染废水的脱色效果.研究表明,印染废水最佳稀释倍数为8倍,脱色用菌丝球最佳接种菌龄为3d,脱色适宜温度为38℃,摇床转速为150～180r/min,脱色初始pH值为3.4～4.6.     

Cu(Ⅱ)印迹[CTS/PVP]和[CTS/PVP/C]材料的制备及表征

以壳聚糖(CTS)、聚乙烯吡咯烷酮(PVP)、活性炭(C)为基材,Cu(Ⅱ)为印迹离子,制备了CTS/PVP共混印迹球[Cu(Ⅱ)-IICP]和CTS/PVP/C共混印迹球[Cu(Ⅱ)-IICPC].以Cu(Ⅱ)的吸附量作为评价指标,对两种共混印迹球的制备条件进行了优化.研究结果表明,当CTS/PVP的质量比为6∶4,活性炭质量分数为0.6%,Cu(Ⅱ)模板剂质量分数为0.05%,所制备的两种共混印迹球吸附性能较佳,且对Cu(Ⅱ)有较好的选择吸附性.物理吸附分析结果表明,与未印迹相比印迹材料的比表面积明显增大.FTIR谱图分析,Cu(Ⅱ)模板主要与CTS和PVP中的—NH2和—OH发生了配位作用.XRD谱图分析结果表明,CTS与PVP、C、Cu(Ⅱ)之间发生了相互作用,改变了CTS原有的晶体结构,使其结晶度降低.     

聚己内酯与聚羟基丁酸戊酸酯的脱氮性能对比

以可生物降解聚合物聚己内酯(PCL)和聚羟基丁酸戊酸酯(PHBV)作为反硝化缓释碳源和微生物载体,利用清水释碳和批式反硝化试验选出适用于再生水反硝化深度脱氮生物滤池的可生物降解碳源滤料,通过比较与分析碳源滤料的表面形态及物质特性和附着微生物的群落特征揭示其性能优越的原因.结果表明,PHBV反硝化启动时间短,反硝化速率高,剩余有机物浓度低,相比PCL具有更稳定持续的反硝化效果.原因是其表面粗糙,且含有大量C—O和CO等亲水性基团,易于微生物附着和降解利用;其表面附着的微生物种类多样,其中发硫菌属(Thiothrix)、假单胞属(Pseudomonas)、菌胶团属(Zoogloea)、黄杆菌属(Flavobacterium)和脱氯菌属(Dechloromonas)等优势菌属均具有异养反硝化功能.因此,PHBV更适合作为再生水反硝化深度脱氮生物滤池的碳源滤料.     

Effect of environmental parameters on the degradability of polymer films in laboratory-scale composting reactors

Previous research in our laboratory reported a convenient laboratory-scale composting test method to study the weight loss of polymer films in aerobic thermophilic (53°C) reactors maintained at a 60% moisture content. The laboratory-scale compost reactors contained the following synthetic compost mixture (percentage on dry-weight basis): tree leaves (45.0), shredded paper (16.5), food (6.7), meat (5.8), cow manure (17.5), sawdust (1.9), aluminum and steel shavings (2.4), glass beads (1.3), urea (1.9), and a compost seed (1.0) which is designated Mix-1 in this work. To simplify the laboratory-scale compost weight loss test method and better understand how compost mixture compositions and environmental parameters affect the rate of plastic degradation, a systematic variation of the synthetic mixture composition as well as the moisture content was carried out. Cellulose acetate (CA) with a degree of substitution (DS) value of 1.7 and cellophane films were chosen as test polymer substrates for this work. The extent of CA DS-1.7 and cellophane weight loss as a function of the exposure time remained unchanged when the metal and glass components of the mixture were excluded in Mix-2. Further study showed that large variations in the mixture composition such as the replacement of tree leaves, food, meat, and sawdust with steam-exploded wood and alfalfa (forming Mix-C) could be made with little or no change in the time dependence of CA DS-1.7 film weight loss. In contrast, substituting tree leaves, food, meat, cow manure, and sawdust with steam-exploded wood in combination with either Rabbit Choice (Mix-D) or starch and urea (Mix-E) resulted in a significant time increase (from 7 to 12 days) for the complete disappearance of CA DS-1.7 films. Interestingly, in this work no direct correlation was observed between the C/N ratio (which ranged from 13.9 to 61.4) and the CA DS-1.7 film weight loss. Decreasing moisture contents of the compost Mix-2 from 60 and 50 and 40% resulted in dramatic changes in polymer degradation such that CA DS-1.7 showed an increase in the time period for a complete disappearance of polymer films from 6 to 16 and 30 days, respectively.Guest Editor: Dr. Graham Swift, Rohm & Haas.Paper presented at the Bio/Environmentally Degradable Polymer Society—Second National Meeting, August 19–21, 1993, Chicago, Illinois.     

Potential applications of porous organic polymers as adsorbent for the adsorption of volatile organic compounds

Volatile organic compounds (VOCs) with high toxicity and carcinogenicity are emitted from kinds of industries, which endanger human health and the environment. Adsorption is a promising method for the treatment of VOCs due to its low cost and high efficiency. In recent years, activated carbons, zeolites, and mesoporous materials are widely used to remove VOCs because of their high specific surface area and abundant porosity. However, the hydrophilic nature and low desorption rate of those materials limit their commercial application. Furthermore, the adsorption capacities of VOCs still need to be improved. Porous organic polymers (POPs) with extremely high porosity, structural diversity, and hydrophobic have been considered as one of the most promising candidates for VOCs adsorption. This review generalized the superiority of POPs for VOCs adsorption compared to other porous materials and summarized the studies of VOCs adsorption on different types of POPs. Moreover, the mechanism of competitive adsorption between water and VOCs on the POPs was discussed. Finally, a concise outlook for utilizing POPs for VOCs adsorption was discussed, noting areas in which further work is needed to develop the next-generation POPs for practical applications.     

生物可降解地膜覆盖对关中地区小麦-玉米农田温室气体排放的影响

为探究生物可降解地膜覆盖对冬小麦-夏玉米轮作农田生态系统温室气体排放的影响,布设了普通地膜覆盖（PM）、生物可降解地膜覆盖（BPM）和无覆盖（CK）这3个处理,采用静态暗箱-气相色谱仪法监测了2018～2019年土壤CO₂、 CH₄和N₂O的排放通量,并用水分利用效率（WUE）、温室气体排放强度（GHGI）和净生态系统经济预算（NEEB）指标评估覆膜对作物产量、农田环境和经济效益的影响.结果表明,与CK相比,PM和BPM增加了玉米季土壤CO₂的排放,PM处理下CO₂排放总量高于BPM处理（P>0.05）.PM和BPM处理均能够显著减少土壤对CH₄的吸收,CH₄的年吸收量较CK处理分别减少了42.0%和24.2%（P<0.05）.与CK相比,PM和BPM增加了小麦季N₂O排放总量（P>0.05）,而显著降低了夏玉米季N₂O排放（P<0.05）.覆膜能够提高作物产量和水分...     

Polymer Mineralization in Soils: Effects of Cold Storage on Microbial Populations and Biodegradation Potential

Soil retrieval, processing and storage procedures can have a profound effect on soil microorganisms. In particular, changes in soil microbial populations may adversely affect the biological activity of a soil and drastically alter the soil's potential to mineralize added substrates. The effects of cold storage on the biodegradation of a series of test polymers was investigated using two soils—a synthetic soil mix (SM-L8) and a field soil (Bridgehampton silt loam) from Rhode Island (RI-1). Biodegradation tests were conducted using freshly prepared/collected soil and again following storage at 4°C for 3 to 8 months. Prior to each biodegradation test, the soils were incubated at 60% water-holding capacity (WHC) and 25°C to rejuvenate the microbial populations; the soils were incubated for periods of 48 h (freshly collected soil) or 25 days (soils stored at 4°C). Soil microbial populations were assessed by enumerating different segments of the population on agar plates containing different selective media. Mineralization of the test polymers (cellulose, poly-3-hydroxybutyrate, and starch acetate, d.s. 1.5) was monitored using standard respirometric techniques. Our results demonstrated that cold storage had a generally negative effect on the soil microbial populations themselves but that its effect on the capacity of the soil microorganisms to degrade the test polymers varied between soils and polymer type. Whereas cold storage resulted in dramatic shifts in the community structure of the soil microbial populations, substantial restoration of these populations was possible by first conditioning the soils at 60% WHC and ambient temperatures for 25 days. Likewise, although the effects of cold storage on polymer mineralization varied with the test polymer and soil, these effects could be largely offset by including an initial 25-day stabilization period in the test.     

Ⅰ Ⅱ-ASBR中厌氧颗粒污泥的微生物组成及特性

在35℃下以奶粉人工合成废水为底物连续运行了两段厌氧反应器(ⅠⅡ-ASBR),且于ⅠⅡ两柱中形成了两种不同的厌氧颗粒污泥,为了解厌氧颗粒污泥的微生态结构及生物学特性,对ⅠⅡ两柱中厌氧颗粒污泥的形态及微生物组成进行扫描电镜观察,并测定了其不同基质中的比产甲烷活性、辅酶F420和胞外多聚物的含量。结果表明:ⅠⅡ-ASBR反应器ⅠⅡ两柱中厌氧颗粒污泥形态及微生物组成差异明显,Ⅰ柱的厌氧颗粒污泥大而密实,Ⅱ柱的较小,呈多孔的网状结构,Ⅰ柱中厌氧颗粒污泥以甲烷八叠球菌、球菌及短杆菌为主,丝状菌较少,Ⅱ柱则以丝状菌、短杆菌为主,球菌较少;Ⅰ柱颗粒污泥利用葡萄糖、甲酸、丙酸的产甲烷活性较高,利用乙酸的活性相对较低,Ⅱ柱颗粒污泥利用葡萄糖、乙酸的产甲烷活性较高,而利用甲酸、丙酸的产甲烷活性较低;辅酶F420的含量Ⅱ柱比Ⅰ柱明显要高,而胞外多聚物含量Ⅰ柱比Ⅱ柱的高。     

细胞冻融破碎对城市污泥中重金属浸出浓度的影响

利用反复冻融的方法对污泥细胞进行破碎,考察处理前后污泥重金属的浸出浓度和形态分布的变化,并通过扫描电镜和红外光谱分析污泥中微生物细胞形貌和有机化合物含量的变化.结果显示,经过细胞破碎处理后,污泥中重金属的浸出浓度增大,锌、镍、铬、镉和铜的浸出浓度比原始污泥分别增加了9.7%、5.1%、25%、9%和50%.不稳定态增加,锌和镍的不稳定态分别增加了20.4%和37.9%,锌、镍、铬和铜的有机态分别减少了4.2%、8.2%、1.2%和5.1%.细胞发生了形貌上的变化,细胞体破碎程度严重.细胞EPS以及污泥中的蛋白质、羧酸、多聚糖等有机基团含量明显减少.细胞破碎后污泥浸出浓度增加的主要原因是污泥中有机态的重金属转化成了其他不稳定态的重金属.     

新型硫酸铝-壳聚糖助滤剂强化砂滤效能研究

将硫酸铝和壳聚糖复配作为微絮凝助滤剂（AS-CTS）,考察其强化过滤性能.利用分子量分级、荧光光谱等手段分析有机物的去除特性,通过Zeta电位、絮体粒径、分形维数的变化分析其强化过滤机理.结果表明：AS-CTS较AS、CTS强化过滤效果明显,在AS/CTS复配比为2：1、CTS投加量0.3mg/L,转速300r/min,搅拌时间2min的条件下,砂滤出水浊度能达到0.1NTU、颗粒物125个/mL,残余铝浓度0.02mg/L;浊度和颗粒物去除率较未加AS-CTS分别提高了58%、61.7%.AS-CTS强化过滤可有效去除分子量>30KDa的腐殖酸和1~3KDa间的色氨酸类蛋白、溶解性微生物代谢产物、类富里酸.AS-CTS主要靠高分子吸附架桥作用和界面化学作用,增加胶体颗粒在滤料表面的粘附;通过形成较大粒径和分形维数的微絮体,增强絮体向滤料表面的迁移.