循环流化床锅炉燃煤技术热电厂生命周期评价

运用生命周期评价方法,应用Gabi5.0软件对采用循环流化床锅炉燃煤技术的热电企业进行资源耗竭和环境影响分析,计算各生产单元生命周期清单的全球变暖潜值、酸化效应潜值、富营养化潜值、非生物资源耗竭潜值、人体毒性潜值以及光化学烟雾和臭氧生成潜值等主要环境影响类型,对燃煤发电过程进行生命周期评价。结果表明,全球变暖和非生物资源耗竭为发电运行过程中主要的环境影响因素,分别占53%和15.05%;锅炉燃烧阶段的环境影响最重,占整个生命周期影响值的77.12%,并且除生物耗竭潜值外的其他5项指标均为发电运行阶段各个单元中最高。采用SNCR脱硝技术减少燃烧过程中NOx的排放量,并对该技术方案进行生命周期评价,比较方案实施前后的环境影响。     

吉林省玉米农田保护性耕作的环境影响评价

以吉林省玉米农田4种保护性耕作为例,应用生命周期评价方法(Life Cycle Assessment,LCA)系统综合地评价吉林省玉米农田不同保护性耕作模式对环境的潜在影响。结果表明,四种保护性耕作模式的能源消耗、温室气体排放、环境酸化和富营养化的潜在环境影响分别平均比传统耕作模式减少14.62%、82.82%、15.37%和15.28%,主要由氮肥的生产及施用引起;水体毒性、土壤毒性及人体毒性则分别比传统耕作高7.40%、6.42%和7.38%,主要由农药的施用引起。综合各种环境影响类型,尽管4种保护性耕作模式较传统耕作模式能显著减缓全球变暖,但对其他环境类型的改变不明显,其中水体毒性为该种植系统中最主要的环境影响类型,富营养化次之。     

Nitrogen deposition effects on Mediterranean-type ecosystems: an ecological assessment

We review the ecological consequences of N deposition on the five Mediterranean regions of the world. Seasonality of precipitation and fires regulate the N cycle in these water-limited ecosystems, where dry N deposition dominates. Nitrogen accumulation in soils and on plant surfaces results in peaks of availability with the first winter rains. Decoupling between N flushes and plant demand promotes losses via leaching and gas emissions. Differences in P availability may control the response to N inputs and susceptibility to exotic plant invasion. Invasive grasses accumulate as fuel during the dry season, altering fire regimes. California and the Mediterranean Basin are the most threatened by N deposition; however, there is limited evidence for N deposition impacts outside of California. Consequently, more research is needed to determine critical loads for each region and vegetation type based on the most sensitive elements, such as changes in lichen species composition and N cycling.     

Is the reproduction of Donax trunculus affected by their sites of origin contrasted by their level of contamination?

The reproductive cycle of bivalves is regulated by several natural environmental factors but exposure to chemical pollutants can also interfere and may result in advanced or delayed spawning season. To our knowledge, the gametogenic cycle of the suspension-feeder bivalve Donax trunculus has not yet been used as biomonitoring tool in ecotoxicological surveys. The aim of this study was to examine over a year physiological reproductive endpoints (sex-ratio, gametogenic and energy reserve cycles) and biological indices (condition index, allometry) in D. trunculus originating from two sites differing by their level of contamination. Specimens were collected bimonthly from November 2008 to October 2009 from a polluted site (Radès Méliane) and a comparatively reference site (Sidi Jehmi) in the Gulf of Tunis (Tunisia). Five stages were depicted by histological examination of gonads: undifferentiated, developing, mature, spawn and spent. Differences in the gametogenic cycle according to the site of origin of bivalves were observed. The spawning period began in March and was maximum in May in bivalves from both sites, but the percentage of spawning animals was higher in the polluted site vs the reference site. The spawning period was shorter in animals from the polluted site comparatively to the reference site. Energy reserves (glycogen, lipids) were higher in March and May comparatively to the other studied periods in bivalves from both sites. Lower energy reserves levels were usually observed in animals from the polluted site compared to the reference site. Seasonal variations of the condition index were associated to the reproductive and nutritive status of bivalves. Differences in allometry were depicted between bivalves from both studied sites. If we try to link allometry, energy reserves and reproduction, it can be hypothesized that for bivalves from the reference site, energy reserves are allocated to gametogenesis and length growth. For bivalves from the polluted site, energy reserves could be devoted to tolerance to chemical stress and to reproductive processes. Therefore, D. trunculus appears as a suitable sentinel species for the assessment of the ecotoxicological risk of contaminants such as endocrine disruptors.     

Environmental assessment of garden waste management in the Municipality of Aarhus, Denmark

An environmental assessment of six scenarios for handling of garden waste in the Municipality of Aarhus (Denmark) was performed from a life cycle perspective by means of the LCA-model EASEWASTE. In the first (baseline) scenario, the current garden waste management system based on windrow composting was assessed, while in the other five scenarios alternative solutions including incineration and home composting of fractions of the garden waste were evaluated. The environmental profile (normalised to Person Equivalent, PE) of the current garden waste management in Aarhus is in the order of −6 to 8 mPE Mg⁻¹ ww for the non-toxic categories and up to 100 mPE Mg⁻¹ ww for the toxic categories. The potential impacts on non-toxic categories are much smaller than what is found for other fractions of municipal solid waste. Incineration (up to 35% of the garden waste) and home composting (up to 18% of the garden waste) seem from an environmental point of view suitable for diverting waste away from the composting facility in order to increase its capacity. In particular the incineration of woody parts of the garden waste improved the environmental profile of the garden waste management significantly.     

模拟车用工况下5kW燃料电池尾气净化系统

模拟了车用工况下燃料电池发动机脉冲式排氢的特点,设计开发了一套质子交换膜燃料电池的尾气净化系统,并以5 kW燃料电池的尾气排放为例,研究其净化效果。研究了电池阳极排放氢气缓冲前后尾气中氢气浓度的变化,以及不同空速条件下氢气的去除效果。结果表明：电堆阳极排放氢气经过缓冲处理后,尾气中氢气浓度趋于平稳,大部分工况下处在2%以下,达到了安全处理的要求;尾气中氢气的去除效果与空速密切相关。对自制的整体式催化剂而言,当空速低于20000 h^-1时,氢气的去除率能达到约95%,而当空速达到39270 h^-1时,氢气的去除率仅为10.9%。鉴于这一问题,提出通过采用尾排空气的分流手段调整催化燃烧反应器对空速的要求,以提高尾气中氢气的去除率。     

镁合金在笔记本电脑外壳材料替代中的环境协调性评价

本文应用生命周期评价,（life cycle assessment,LCA）方法,对镁合金以及塑料这两种笔记本电脑外壳进行了初步评价和比较,结果表明镁舍金能源消耗、温室效应方面为塑料的556．31％、383．30%。但在材料的性能、资源消耗、酸化效应、生态毒理、材料的再生性等方面明显优于塑料。     

Methanogenic activity of woody debris

The paper is devoted to the phenomenon of methanogenic activity of woody debris, i.e., methane production in the course of wood decomposition by fungi, which are not directly involved in methane synthesis but form an initial link in the trophic chain leading to methanogenic archaea. Expert evaluation of probable amounts of methane emission is made. The results show that woody debris is an important global source of this greenhouse gas.     

Spatial identification by satellite imagery of the crop–fallow rotation cycle in northern Laos

In the mountainous regions of northern Laos, shifting cultivation, or slash-and-burn agriculture, is widely practiced. However, the crop–fallow rotation cycle is becoming shorter owing to forest conservation policies and population pressure, causing loss of productivity that deleteriously affects farmers’ livelihoods in the region. To investigate regional land use conditions, we have developed a method of identifying the crop–fallow rotation cycle from Landsat Thematic Mapper (TM) and Enhanced Thematic Mapper+ (ETM+) data. We assessed the impact of the identified cycle on plant production measured by Normalized Difference Vegetation Index (NDVI). The study site was an area in Luang Prabang Province. Using eight TM and ETM+ images acquired annually from 1995 to 2003, except for 1998, when cloud-free data were not collected, we classified land use in each year as crop or fallow by the presence of vegetation in the late dry season. Conformity with fallow age determined by field investigation was 69.1%. The cultivation frequency from 1995 to 2002 showed that 77,000 ha (17.3% of the study site) had not been used for cropping during the period, but 41,000 ha (9.2%) had been used every year. Of the study site, 129,000 ha (29.1%) was cultivated one or two times, 83,000 ha (18.7%) was three or four times, and 54,000 ha (12.2%) was five or six times. The NDVI of crops in November did not provide sufficient evidence to prove the assumption that a longer fallow period would result in better crop yields. Instead, the regeneration of fallow vegetation was evidenced by the higher NDVI values after longer fallow. More than 8 years would be needed to reach the same NDVI as forest. From the produced maps indicating fallow age and cultivation frequency, we found that areas with high potential for regeneration decreased as cultivation frequency increased. Areas near rivers were intensively used, and fallow length was accordingly short. Low-potential areas were found in the western basin of the Mekong River. This spatial information can be used to detect areas where biomass productivity is at high risk of deteriorating. Readers should send their comments on this paper to: BhaskarNath@aol.com within 3 months of publication of this issue.     

Sustainability of silicon feedstock for a low-carbon society

We need to ensure the sustainable management of advanced materials, such as purified silicon, that contribute to a low-carbon society. Because a drastic increase in the demand for photovoltaic (PV) systems is tightening the supply of silicon for PV cells, the sustainability of silicon feedstock needs to be explored. For this purpose, a material flow analysis of silicon in Japan from 1996 to 2006 is presented in this paper. Our analysis finds that rapid growth in demand for polycrystalline silicon (pc-silicon) and single crystalline silicon (sc-silicon) has changed the structure of the purified silicon supply. The strong demand for purified silicon for solar cells is responsible for this change. While off-grade silicon obtained as a by-product of electronic-grade silicon (EG-Si) covered the demand for solar sells before 2000, pc-silicon is currently produced independently for solar cells via an energy-intensive process. Analysis of the resource effective-use index (REI), which indicates how effectively purified silicon is used, shows progress in the effective use of pc- and sc-silicon. REI analysis indicates that the effective use of pc-silicon is reaching a maximum, while the effective use of sc-silicon is advancing, with a corresponding increase in price. To ensure a sustainable supply of silicon feedstock, this paper proposes four solutions: (1) production of solar-grade pc-silicon by a less costly and less energy-consuming method; (2) reduction in the amount of crystalline silicon per watt in solar cells; (3) acceleration of the development and deployment of other solar cell types; and (4) reuse and recycling of solar cells in the future.