模式采样法采集尾气中BaP的研究

用模式了取样法集汽车柴油发动机尾气中多环茎烃,并重点对ＢａＰ采样方法进行研究,结果表明,该法采样时间仅１－２ｓ,采样体积为３３０ｍｌ（ｓ．次）,回收率７７．６％,９次重复的变异系数为２９．６％,测得ＢａＰ的数据与国际ＩＳＯ规定的ＣＶＳ定容取样法可比。     

精制氯化铵母液循环周期及其污染控制

在现有工艺条件下 ,精制氯化铵母液循环使用必有其限度 ,以此决定母液循环使用的周期性 ,并推导出母液循环周期的定量表达式 ,为其污染控制和现场环境执法提供便利。     

生命周期评价综论

生命周期评价已被纳入到ISO14000环境管理体系中,将成为本世纪最有效的环境管理工具之一。通过综述生命周期评价的概念、起源和发展、技术框架及其应用,指出了当前生命周期评价的方法论和实践上存在的局限性,并对未来发展方向作了展望。     

State-of-the-art applications of machine learning in the life cycle of solid waste management

● State-of-the-art applications of machine learning (ML) in solid waste (SW) is presented. ● Changes of research field over time, space, and hot topics were analyzed. ● Detailed application seniors of ML on the life cycle of SW were summarized. ● Perspectives towards future development of ML in the field of SW were discussed. Due to the superiority of machine learning (ML) data processing, it is widely used in research of solid waste (SW). This study analyzed the research and developmental progress of the applications of ML in the life cycle of SW. Statistical analyses were undertaken on the literature published between 1985 and 2021 in the Science Citation Index Expanded and Social Sciences Citation Index to provide an overview of the progress. Based on the articles considered, a rapid upward trend from 1985 to 2021 was found and international cooperatives were found to have strengthened. The three topics of ML, namely, SW categories, ML algorithms, and specific applications, as applied to the life cycle of SW were discussed. ML has been applied during the entire SW process, thereby affecting its life cycle. ML was used to predict the generation and characteristics of SW, optimize its collection and transportation, and model the processing of its energy utilization. Finally, the current challenges of applying ML to SW and future perspectives were discussed. The goal is to achieve high economic and environmental benefits and carbon reduction during the life cycle of SW. ML plays an important role in the modernization and intellectualization of SW management. It is hoped that this work would be helpful to provide a constructive overview towards the state-of-the-art development of SW disposal.     

精炼铜行业的生命周期节能减排目标评价

按照生命周期评价方法,建立了精炼铜的生命周期模型,采用生命周期节能减排评价指标(ECER),对比评价了原生铜和再生铜生产的生命周期节能减排效果,计算了改变再生铜市场份额所能带来的节能减排削减幅度,并与精炼铜行业实现节能减排政策目标所需的综合削减幅度进行了对比.结果表明,再生铜比原生铜的ECER指标小62.5％,因此废铜的再生循环明显有利于节能减排政策目标的实现.但是,当再生铜市场份额由2010年的38.5％提升至《有色金属“十二五”发展规划》中要求的40％时,其综合削减幅度仅为13％,远未达到铜冶炼行业的目标综合削减幅度27.8％.因此,精炼铜行业不仅需要更大幅度地提高铜再生比例,同时还需要采用更多清洁技术和改进措施.本文方法可用于计算各种行业的节能减排目标综合削减幅度,从而帮助判断各种改进方案和措施是否足以达到节能减排宏观政策目标的要求.     

不同生物量苦草在生命周期的不同阶段对水体水质的影响

在玻璃温室大棚内,模拟太湖的水、土、植物情况,研究了不同生物量苦草在1年内生命周期中不同阶段对水体水质的影响.研究结果表明,不同生物量的苦草在对水体水质的影响有较大的差异,此差异受苦草生长状况的影响显著.通过单因素方差分析得出从整个生命周期看,苦草生物量为992.00g时,对水体pH值影响最大,不利于苦草吸收NH4+-N和ρ(TOC)的降低;为496.00g时,水体ρ(DO)的周年平均值处于较高水平,约8.65mg/L;为228.00g时,有利于ρ(TP)的降低,不利于其吸收NO3--N和ρ(TN)的降低.其中,生长期,苦草对水体营养盐的去除率随生物量的增加不断增大,当生物量达到2380.00g时,去除率放缓;衰亡期,苦草生物量为168.00g时,水体TN去除率取得极大值,为784.00g时,水体TP去除率取得极小值.最终确定214.00g的苦草残余生物量为最佳滞留量,此时苦草密度为118.00g/m2.     

Analysis of blood chemistry and flow cytometry of gonadal cell cycle during reproductive cycle of Anabas testudineus

The population of climbing perch, Anabas testudineus, an important food fish in India, is presently under threat and has been declared endangered. A narrow range of environmental conditions for successful reproduction of the species was previously ascertained in breeding experiments. In this study, the role of physiological parameters including plasma glucose, total protein, cholesterol, and glycogen content in liver and ovary were determined with respect to the reproductive cycling stages. Flow cytometric analysis of cell cycle of ovary and testis in relation to reproductive cycle was also analyzed. In both the sexes, plasma glucose and plasma protein changed significantly during breeding cycle. Plasma cholesterol levels were reduced markedly during spawning. Liver and ovarian glycogen levels showed significant variation during reproductive cycling. Flow cytometric study revealed that the hypoploid and synthesis phase were altered significantly with breeding cycle in ovarian and testicular cells. Data indicate that the biochemical parameters indicative of the fish reproduction capacity are influenced by environmental conditions. Thus, climatic changes may therefore potentially induce biochemical alterations that may exert detrimental effects on fish reproduction and subsequent population decline.     

Alteration of photosystem II activity by atrazine on Chlamydomonas reinhardtii synchronized and asynchronized cell cycle cultures

Inhibition of photosystem II (PSII) activity by atrazine was investigated in the green alga Chlamydomonas reinhardtii during different states of the cell cycle. The algal cultures were maintained under continuous light or under light/dark cycle (16/8?h) to obtain homogenized cell cycle distribution. The cycle state of algal population was determined by the DNA content using flow cytometry and defined as newly divided cells before the initiation of DNA replication (G₀/G₁) and cells at the end of the replication cycle with fully duplicated DNA content (G₂/M). Under different synchronized states of the cell population, the photosynthetic activity was investigated after treatment at 10, 100, and 1000?µmol?L^?1 atrazine exposed for 24?h by using fluorescence parameters related to PSII activity measured with a plant efficiency analyzer and pulse-amplitude modulated methods. In this study, we found that the atrazine effect was different depending on cell cycle phases and the period of illumination. Algal cells under light–dark cycle showed inhibition of the PSII electron transport leading to an increase of heat energy dissipation by the PSII reaction center. Algal cells grown under continuous light was shown to be more resistant to atrazine than the cells grown under light–dark cycle.     

湿地生态系统硅生物地球化学循环研究进展

硅在地壳中的丰度仅次于氧,是地球表面大多数土壤和岩石的一种基本成分,也是水生植物（特别是硅藻类）以及多种作物生长所必需的营养元素,还是控制陆地、海洋、沿海和内陆水生态系统机能的重要营养元素。目前关于全球硅的生物地球化学循环的研究多集中在陆地和海洋两大生态系统,而湿地生态系统中硅的循环过程、储存量尚不清楚。虽然在河口湿地开展一些关于硅的相关研究,但是硅在湿地的循环机制研究不够全面,尤其相比碳、氮、磷等元素,硅素研究甚少。而且,国内关于硅的相关研究更为匮乏。本文在总结国内外关于湿地生态系统硅素研究的基础上,综述硅在湿地生态系统的存在形态与分布特征,阐述硅在湿地生态系统中的基本循环过程,列举影响硅在湿地生态系统中循环的主要因素,如：湿地类型、水淹时间、季节变化、人类干扰等;提出在今后研究工作中应进一步探索硅在湿地生态系统中迁移、转化的机制,加深研究人类活动对湿地生态系统硅循环的影响,特别是应该加强研究河口潮汐湿地和沿海湿地生态系统硅的生物地球化学循环过程和储存量,有助于明确湿地生态系统对于硅的截留量;并弄清湿地中碳与硅含量之间的关系,从水文学角度分析湿地中排水、蒸发、洪期及滞留时间等因素对硅循环的影响,从而试图建立湿地硅循环模型,有助于预测湿地生态系统硅循环对沿海地区赤潮等富营养化现象和全球气候变化的影响。     

Clustering economic sectors in China on a life cycle basis to achieve environmental sustainability

To improve material efficiency, industrial structure optimization becomes a focal point in Chinese industrial and environmental policies. It is crucial to cluster economic sectors and determine their priority for industrial and environmental policy implementation. Integrating a set of criteria, a hybrid input-output model and the hierarchical cluster analysis, this study clusters China’s economic sectors and determines their priority on a life cycle basis. China’s economic sectors are clustered into three clusters. Industrial structure changes (industrial policy) should encourage the development of sectors in cluster 1 and limit the development of sectors in cluster 2. Technology development and materials recycling (two environmental policies) should mainly focus on sectors in clusters 1 and 2. Future industrial policies in China should limit the development of two sectors named Manufacture of metal products and Extraction of petroleum and natural gas. Instead of limiting some industries by command-and-control, the best policy option is to remedy environmental standards and law enforcement. Enterprises belonging to the identified key sectors from the viewpoint of direct production impacts should be concerned to achieve enterprise sustainability. To achieve sustainable production chains, the identified key sectors from the viewpoint of accumulative production impacts should be concerned. For sustainable consumption, the identified key sectors from the viewpoint of consumption impacts should be concerned to transform consumption styles. Most of environmental pressure can be alleviated not only by technical improvements and material recycling, but also by the development of economic sectors in cluster 1.