矿化垃圾生物反应床处理印染废水的工艺参数优化及优势菌群

为了探讨矿化垃圾再利用于印染废水处理的可行性,研究了矿化垃圾生化反应床处理模拟印染废水的工艺参数,进行了优势菌群的镜检和提取、培养,实验结果表明,适宜的工艺运行参数如下为水力停留时间12~24 h,水力负荷100~140 L/(m3·d),COD污染负荷240~360 g/(m3·d),布水周期为24 h条件下的进水历时为6 h;适宜的工艺运行参数条件下,矿化垃圾生化反应床对模拟印染废水的COD去除率97%以上,总磷去除率95%以上,氨氮的去除率在98%以上;处理模拟印染废水的矿化垃圾生化反应床内的微生物群落以球菌为主,该菌体对模拟印染废水具有良好的专性降解作用。研究结果将对矿化垃圾的再利用和印染废水的处理提供一定的技术参考。     

基于正交实验的颗粒移动床烟气脱硫工艺参数优化

石灰石颗粒移动床脱硫工艺参数是影响脱硫效率和操作压降变化的重要因素,考虑到工艺参数对脱硫过程的影响,基于正交实验方法,通过直观分析和方差分析得到喷淋密度、空床气速、SO2浓度、烟气温度和床层下移速度对脱硫效率影响程度的主次顺序和脱硫效率与各因素之间的关系,并且分析了各因素对脱硫效率的影响规律。研究发现,各因素对脱硫效率的影响程度依次是空床气速>喷淋密度>SO2浓度>烟气温度>床层下移速度。喷淋密度对脱硫效率的影响高度显著,呈正相关;空床气速对脱硫效率的影响高度显著,呈负相关;SO2浓度和烟气温度对脱硫效率有影响但不显著,呈负相关。床层下移速度与脱硫效率呈正相关。     

Optimal feed profile for a second order reaction in a semi-batch reactor under safety constraints: Experimental study

Maximising the yield of the second order reaction (2-butanol+propionic anhydride) by manipulating the inlet flow rate is considered for an isothermal semi-batch process. First a procedure for the determination of the kinetic parameters using coupled spectroscopic and calorimetric methods is presented. Then an optimisation of the reaction system is performed numerically and verified experimentally. Constraints on the amount of heat produced and on the temperature attainable in the case of cooling failure are imposed for safety consideration.     

环境温度对粉尘爆炸参数的影响

研究了环境温度对萘酐(C10H6O2)粉尘爆炸参数的影响,得到了随着温度的升高,最大爆炸压力峰值变化不大;而最大压力上升速率增大,爆炸下限浓度降低,安全氧含量也会降低.根据化学动力学理论对这一影响进行了分析.     

影响大型复杂机械钢结构系统可靠性的因素分析

以结构力学为理论依据,以有限单元法为基础,借助和参考有关有限元程序设计方法,按照结构系统可靠性失效模式分析的要求,采用编程语言研制成功基于有限元的可靠性分析软件RAPS(Reliability Analysis Program of Structure based on FEM),运用该软件对立体车库钢结构的可靠性进行具体的分析;对判定结构系统失效与否的失效准则进行讨论和分析,并针对立体车库钢结构,得出合理的失效准则和系统可靠度的计算方法;通过实例说明约界参数CAP、失效路径长度和系统复杂程度对失效准则和系统可靠度结果的影响。     

两种应用场景下NDVI时间序列数据拟合方法研究

植被覆盖指数（NDVI）时间序列数据集包含地表植被的长势、生长周期、时空变化等信息,其拟合重建结果可应用于物候信息提取、生态质量评价、人类活动扰动识别、覆被变化动态监测等方面。基于TIMESAT软件,选取物候参数提取和扰动识别2个应用场景,结合地面站点数据和Jacknife法模拟数据,对比分析非对称高斯函数拟合法（AG法）、双Logistic函数拟合法（D-L法）和Savitzky-Golay滤波法（S-G法）3种方法的拟合效果。结果表明：（1）3种方法拟合重建后提取的生长开始时间（SOS）、生长结束时间（EOS）、生长周期（LOS）等物候参数接近站点数据,AG法和D-L法保持NDVI时序曲线整体变化特征的能力较强,提取的SOS和EOS更接近站点数据;（2）人类活动扰动识别应用场景中,S-G法在滤波时能够最大限度地保留时序曲线细节变化,恢复速率相关系数达到0.618,回归估计标准差低于AG法和D-L法,因此识别精度最优。     

Sources and major biogeochemical pathways of organic matter in the mangrove system of Rufiji estuary

Fatty acids were extracted from the surface sediments (10 cm) of three sampling sites of Rufiji estuary to infer their sources and biogeochemical pathways. The fatty acids ranging from C₈ to C₂₄ were distinguished from this study, and were broadly classified into saturated (SFAs), monounsaturated (MUFAs) and polyunsaturated fatty acids (PUFAs). SFAs were found to be the major fraction at station 1 and 3 where as at station 2, MUFAs dominated. A total of 19 fatty acids with a total concentration of 64.91 μg/g dry weight were characterised at station 1. C_16:0 was the most abundant fatty acid contributing 21.94% of total fatty acids (TFAs). C_22:2 was the second most abundant, which accounted for 9.46% of TFAs. Fatty acids ranging from C₁₂ to C₂₄ were identified at station 2. C₂₀ fatty acid was the most abundant fatty acid contributing 21.94%, followed by C_16:0. At station 3, fatty acids ranging from C₈ to C₂₄ were obtained. The PUFA C_20:5n-3 was the most abundant fatty acid contributing 21.65%, followed by C_24:0 (15.00% of TFAs). The ratio of lower molecular weight (LMW) to higher molecular weight (HMW) biomarkers was used as an indicators to distinguish higher plants organic matter from algae-derived fatty acids.     

水质参数的遥感反演和遥感监测

遥感技术由于具有快速、宏观、低成本和周期性的优点,便于探测水质的时空变化,已成为水质参数监测的重要手段。目前能够直接进行遥感反演的水质参数主要是悬浮物浓度、叶绿素a浓度、可溶解性有机物等光学活性物质,并已经建立了许多反演模型。但是这些模型直接用于水质的遥感监测仍存在一些问题。今后,利用3S技术将地面观测和遥感观测结合起来,可望推动水色遥感的实际应用。     

中国太湖流域(江苏南部)人群复合污染经口途径暴露风险评估

对太湖流域(江苏南部)无锡、常州、镇江3市经口介质(地下水、土壤、农作物共389个样品)中Cu、Pb、Cd等8种重金属和有机污染物DDTs的污染状况进行实验室分析,运用US EPA推荐的暴露风险评估模型,对研究区人群进行了暴露参数实测,考虑中国居民膳食习惯,对太湖流域居民经口途径的暴露风险进行评估.研究结果表明:太湖流域重金属、有机污染物污染较严重;传统方式估算的太湖流域人群经口暴露风险,男性总暴露风险为9.07 × 10-3,女性为1.00×10-2;考虑综合处理因素的流域人群经口暴露风险,男性为3.94×10-3,女性为4.35×10-3.食物源经口介质采用传统方式估算的暴露风险值和经综合处理后的暴露风险值均高于可接受暴露风险水平,致癌风险明显高于非致癌风险,Cd的致癌风险对暴露风险值贡献率最大,其次为Pb.     

Effects of Meteorological Parameters on Air Pollutant Concentrations in Elazig,Turkey

In the present study, air pollutant concentrations have been analyzed statistically with meteorological factors in the city of Elazig, which is located in the east Anatolia region of Turkey, for the months of September, October, November, December, January, February, March, and April during the years 2003 and 2004. SPSS code was used for statistical analyses. The relationship between monitored air pollutant concentrations, such as SO₂ and the total suspended particles (TSP) data, and meteorological factors such as wind speed, temperature, relative humidity and pressure was investigated. According to the results of linear and non-linear regression analysis, it was found that there is a moderate and weak level of relation between the air pollutant concentrations and the meteorological factors in Elazig. The correlation between the previous day's SO₂, TSP concentrations and actual concentrations of these pollutants on that day was investigated and the coefficient of determination R was found to be 0.80 and 0.76, respectively. The statistical models of SO₂ and TSP, including all of the meteorological parameters, gave an R of 0.50 and 0.40, respectively. Further, in order to develop this model, the previous day's SO₂ and TSP concentrations were added to the equations. The new model for SO₂ and TSP was improved considerably with R = 0.85 and 0.80, respectively.