DIGITAL SIMULATION OF THE EFFECT OF THERMAL DISCHARGE ON STREAM WATER QUALITY1

A modified transient version of the Streeter-Phelps model along with the energy balance equation is employed to analyze the effects of waste heat discharge from power plants on stream water quality. Analysis is also made to examine the effects of the upstream water quality and stream velocity on the downstream DO concentration level. The resulting coupled nonlinear hyperbolic partial differential equations representing the energy, BOD and DO concentrations are solved by the method of characteristics and simulated on a digital computer. Final numerical results indicate that the allowable quantity of thermal discharge does heavily depend on the upstream quality.     

IRRIGATOR INVOLVEMENT IN THE IMPLEMENTATION OF AGRICULTURAL NONPOINT SOURCE POLLUTION CONTROL PROGRAMS1

ABSTRACT: Recently, Congress designated irrigated agriculture under the “nonpoint source” category, covered by Section 208 of P.L. 92-500 and involves the use of “best management practices.” Generally, the most appropriate solutions for pollution abatement from irrigated agriculture involve the delivery and use of water rather than the treatment of irrigation return flows. 1. Technological alternatives should be utilized that are sensitive to local conditions and acceptable to the farmers. 2. Informational and educational programs to assist farm operators individually and collectively must be instituted prior to the start of the project; imaginatively conceived, and continuously modified and upgraded if motivation for change is to be encouraged. 3. Technical assistance personnel should be given short courses in skills needed for working effectively with irrigators. 4. Communication techniques used for working with farmers as individuals and groups should be designed into the implementation program and evaluated. 5. Credibility and trustworthiness of Federal and state agencies in the eyes of the irrigators provide the important final ingredient in effectively implementing change and reducing nonpoint source pollution from irrigated agriculture.     

石油工业废弃物处置及其生物治理趋势

鉴于我国石油工作者对石油工业废弃物的普遍关注，现在介绍生物治理的基本概念及ＳＰＥ石油工程师协会中有关含油污泥生物处置的途径及其突出优越性。生物液／固处理工艺（ＬＳＴ）是目前含油污泥处置现场最经济可行的处置方案。这种好氧的ＬＳＴ工艺过程，能够比较充分地代谢和降解石油污泥中的油和脂并大量除去多环芳烃类（ＰＡＨ）化合物及其它有机化合物，明显地降低了石油废弃物对人、畜的毒害程度。其工艺较简单，操作也简易，凡经此工艺处理后的废弃物不留残毒和后患，因此早已被世界上先进国家的炼油业视为处理含油污泥的有效选择了。石油工业废弃物的生物防治和生物降解工艺较大程度地领先于目前我国现场正在执行的各种处理含油废弃物的处理工艺。     

对钻井废物污染的全过程控制

在钻井作业过程中控制废物的排放量和毒性，变末端处理为全过程控制，采取各种措施预防钻井废物的污染是近年来国外油气田环保工作的一项重要内容。本文就采用小井眼钻井工艺；减少井眼冲蚀；强化环境管理；提高钻井液固控系统的处理效率；开发各种合成基钻井液；采用低毒无害的钻井液化学添加剂等６个方面讨论了减少钻井废物产生量的途径和降低钻井液及添加剂对环境的影响     

生物技术在油气田环境污染治理中的应用

介绍了生物技术及其在环境污染治理中的应用状况，根据我国油气田环境污染治理现状，提出了生物技术在我国油气田环境污染治理中重点研究的方向和步骤以及应用前景。     

沱江和釜溪河的氨治理及氨回收

本文介绍了沱江和釜溪河近年来的氨污染现状及危害，认为氨是应治理的首位污染物；简要分析了生物、化学、物理化学三类除氨方法的优缺点；着重介绍了吹脱法除氨技术，提出用吹脱法治理沱江和釜溪河的无机氨污染，并进行了上述各法的经济效益比较     

活性污泥1#数学模型(ASM1)中的组分

活性污泥l#数学模型(AMl)常常用于预测污水处理厂中的生物过程。活性污泥数学模型组分的鉴定对活性污泥l#数学模型的应用具有重要的意义。本文描述了在活性污泥l#模型(ASMl)中污水组分的概念,以及组分鉴定的研究现状。     

气浮--厌氧--生物接触氧化工艺处理屠宰废水

介绍了采用气浮-厌氧-生物接触氧化工艺处理屠宰废水的工程实例。当进水CODcr≤4500mg／L时，出水可达到国家《肉类加工工业污染物排放标准》(GB13457—1992)一级标准。     

化学生物絮凝-悬浮填料移动床组合工艺处理城市污水研究

采用化学生物絮凝和悬浮填料移动床组合工艺处理城市污水。通过改变化学生物絮凝工艺中投加的混凝剂种类和投加量、改变悬浮填料移动床工艺中水力停留时间和气水比取得不同工况条件下各类污染指标的去除效果。采用该组合工艺,当进水COD(89～319)mg/L,TP(1.24～4.26)mg/L,SS(44～240)mg/L,NH4 -N(14.7～36.3)mg/L时,出水可达到COD<50mg/L,TP<0.5mg/L,SS<20mg/L,NH4 -N<5mg/L。     

枣庄市二氧化硫污染现状及对策

枣庄市一次能源消费以煤为主，空气污染为煤烟型污染。因而，必需采取调整产业结构，发展集中供热和联片采暖，开展清洁能源替代等综合措施控制二氧化硫污染。