Olive oil mill wastewater for soil nitrogen and carbon conservation

In this work the application of two levels of N fertilizer (NH₄NO₃) dissolved in water or olive oil mill wastewater (OOMW) diluted 10 or 20 times in water, has been studied in relation to the properties of two soils (Loam and Silt-Clay-Loam). Also, the effect of irrigation water bubbled with CO₂ (Dissolved Inorganic Carbon, DIC) was studied. Nitrate N, ammonium N, total N, organic C (OC), and CaCO₃ contents were determined in the soil as well as pH, electrical conductivity (EC), oxidation–reduction potential (ORP), and absorbance at 250 and 360 nm.     

上海郊区小型沼气发展的前景与方向

文章介绍了上海郊区沼气开发利用的发展历程和现状,分析了上海沼气发展萎缩的原因,指出上海在节能减排的大形势、寻找合理的农村生活垃圾处理出路和解决小型禽畜养殖场的环境问题等压力下,对郊区的沼气发展产生了新的需求。而以小型养殖场为中心、吸纳农村有机生活垃圾的小型沼气系统则是上海郊区未来沼气发展的方向,也是新农村环境整治的可行途径。     

Soil and vegetation carbon stocks in Brazilian Western Amazonia: relationships and ecological implications for natural landscapes

The relationships between soils attributes, soil carbon stocks and vegetation carbon stocks are poorly know in Amazonia, even at regional scale. In this paper, we used the large and reliable soil database from Western Amazonia obtained from the RADAMBRASIL project and recent estimates of vegetation biomass to investigate some environmental relationships, quantifying C stocks of intact ecosystem in Western Amazonia. The results allowed separating the western Amazonia into 6 sectors, called pedo-zones: Roraima, Rio Negro Basin, Tertiary Plateaux of the Amazon, Javari-Juruá-Purus lowland, Acre Basin and Rondonia uplands. The highest C stock for the whole soil is observed in the Acre and in the Rio Negro sectors. In the former, this is due to the high nutrient status and high clay activity, whereas in the latter, it is attributed to a downward carbon movement attributed to widespread podzolization and arenization, forming spodic horizons. The youthful nature of shallow soils of the Javari-Juruá-Purus lowlands, associated with high Al, results in a high phytomass C/soil C ratio. A similar trend was observed for the shallow soils from the Roraima and Rondonia highlands. A consistent east–west decline in biomass carbon in the Rio Negro Basin sector is associated with increasing rainfall and higher sand amounts. It is related to lesser C protection and greater C loss of sandy soils, subjected to active chemical leaching and widespread podzolization. Also, these soils possess lower cation exchangeable capacity and lower water retention capacity. Zones where deeply weathered Latosols dominate have a overall pattern of high C sequestration, and greater than the shallower soils from the upper Amazon, west of Madeira and Negro rivers. This was attributed to deeper incorporation of carbon in these clayey and highly pedo-bioturbated soils. The results highlight the urgent need for refining soil data at an appropriate scale for C stocks calculations purposes in Amazonia. There is a risk of misinterpreting C stocks in Amazonia when such great pedological variability is not taken into account.     

Endpoint ‘floating leaves’ of <Emphasis Type="Italic">Potamogeton natans</Emphasis>: A new method to evaluate the development of macrophytes in pond mesocosms

Goal, Scope and Background One of the advantages of long-term mesocosm experiments as compared to short-term standard toxicity tests in the laboratory is the potential for detecting secondary effects due to the interaction of species and recovery with biomass of macrophytes being an important endpoint. However, generating biomass data by harvesting is often laborious, time-consuming, costly and restricted to the end of the experiment. Moreover, valuable information may get lost, in particular in single application studies, since maximal primary effects and secondary effects or recovery occur per se at different times. Potamogeton natans was used as an example in order to test whether number and area of floating leaves can be reliably measured and be used as intermediate and final endpoints in mesocosm effect studies. Methods Digital photos, which were taken of the water surface in the course of an indoor pond mesocosm study on herbicide effects, were subjected to image analysis. The results were compared to wet weight and ash-free dry weight of Potamogeton at the end of the herbicide study. Results and Discussion Both number and area of floating leaves indicated the same herbicide effects as wet weight and ash-free dry weight of Potamogeton. Error introduced by the different work steps is small and can be further minimised by a number of method improvements. Recommendations and Perspectives In indoor mesocosm studies, errors due to the perspective adjustment may be circumvented by taking the photos perpendicular to the water surface. Correction for lens aberration, identical light conditions and the use of fluorescence images are considered promising. Field applications are proposed.     

农林废弃物在去除废水重金属中的环境友好利用

评述了近年来国内外利用廉价农林废弃物去除废水重金属的研究进展.重点论述了化学改性处理的农林废弃物对重金属离子的吸附性能,并详细比较了改性前后及各种改性方法的吸附效率.改性处理明显提高了农林废弃物的吸附性能,一些改性的农林废弃物吸附剂对某些重金属离子具有良好的吸附性能,显示出广阔的应用前景.但在今后的研究中还应强化改性农林废弃物吸附剂表面结构表征、吸附作用机理和动力学的研究,开发新型高效的改性再生方法,并对废水处理成本进行详细评估.     

Effects of bed materials on the performance of an anaerobic sequencing batch biofilm reactor treating domestic sewage

The objective of this study was to determine the best performance of an anaerobic sequencing batch biofilm reactor (AnSBBR) based on the use of four different bed materials as support for biomass immobilization. The bed materials utilized were polyurethane foam (PU), vegetal carbon (VC), synthetic pumice (SP), and recycled low-density polyethylene (PE). The AnSBBR, with a total volume of 7.2L, was operated in 8-h batch cycles over 10 months, and fed with domestic sewage with an average influent chemical oxygen demand (COD) of 358+/-110mg/L. The average effluent COD values were 121+/-31, 208+/-54, 233+/-52, and 227+/-51mg/L, for PU, VC, SP, and PE, respectively. A modified first-order kinetic model was adjusted to temporal profiles of COD during a batch cycle, and the apparent kinetic constants were 0.52+/-0.05, 0.37+/-0.05, 0.80+/-0.04, and 0.30+/-0.02h(-1) for PU, VC, SP, and PE, respectively. Specific substrate utilization rates of 1.08, 0.11, and 0.86mg COD/mgVS day were obtained for PU, VC, and PE, respectively. Although SP yielded the highest kinetic coefficient, PU was considered the best support, since SP presented loss of chemical constituents during the reactor's operational phase. In addition, findings on the microbial community were associated with the reactor's performance data. Although PE did not show a satisfactory performance, an interesting microbial diversity was found on its surface. Based on the morphology and denaturing gradient gel electrophoresis (DGGE) results, PE showed the best capacity for promoting the attachment of methanogenic organisms, and is therefore a material that merits further analysis. PU was considered the most suitable material showing the best performance in terms of efficiency of solids and COD removal.     

生物质热电厂大气影响评价的研究

为确定生物质能发电环境方面的可行性,分析了生物质能发电的工艺流程,相比于火电的优缺点,并进行了生物质能热电联厂的大气环境影响评价研究。结果表明：预测评价的烟尘、SO2和NO2排放浓度分别为11,63mg／m^3、200．3mg／m^3和378．7mg／m^3,均远低于火力发电的排放值;在不同条件下、不同地点SO2和NO2的1小时、日均浓度也均远低于火力发电的浓度值。说明了生物质能发电在环境友好性方面具有明显的优势。     

飞播马尾松林生物产量及生产力研究

湘乡市16年生不同密度的马尾松(Pinus massoniana)飞播林林分单株生物量随密度的增加而明显减小,低密度林分是高密度林分的2 42倍,高出18.33kg;当林分密度一定后,林分生物量同样随密度的增加而减小,低密度林分比高密度林分高出21.81t/hm2。林分各组生物量随密度增大而减小,并出现W>W根>W枝>W皮>W叶的规律。年均净生长量低密度林分是高密度林分的1.40倍。     

剑麻纤维基多孔炭材料的制备及其吸附氯苯的研究

以剑麻纤维为原料,通过简易的一步炭化活化法制备了一系列多孔炭材料,分别探究了3种温和的金属盐活化剂、活化剂与剑麻纤维的质量比和活化温度对炭材料的氯苯吸附量的影响,并通过BET、SEM、XRD、Raman、FT-IR、元素分析等手段表征其物理化学性质.结果表明,当采用CuCl₂为活化剂、CuCl₂与剑麻纤维的质量比为10∶1及活化温度为800℃时,制备得到的剑麻纤维基多孔炭(PCC)吸附性能最佳,其在氯苯浓度为1560 mg·m^-3时,吸附量达到856 mg·g^-1,而未经CuCl₂活化的炭材料(PC)的氯苯吸附量仅为15 mg·g^-1.氯苯吸附性能的提升主要归因于比表面积、孔容、无序性和表面含氧官能团的增加.此外,采用巨正则系综蒙特卡洛(GCMC)方法模拟氯苯分子在制备的多孔炭材料中的吸附行为,结果表明,该材料中孔径为0.5 nm的孔对氯苯分子的吸附能力最强,且对氯苯吸附起主导作用的为苯环中心和Cl原子与炭材料上连接含氧官能团的H原子之间的静电作用力.     

进口含金属物料的固体废物鉴别方法研究

基于已完成的112例进口含金属物料的固体废物鉴别实践,系统地介绍了进口含金属物料的申报品名及各品名所占比例,种类及各种类的特征、固体废物鉴别关键方法和每种鉴别结果所占比例,其中申报品名主要为矿石(砂),所占比例为51.8%;鉴别结果主要为冶炼渣,所占比例为37.5%。提出对于进口的含金属物料,通过测量主要成分和含量、最主要金属元素及典型重金属元素的含量、物相组成、矿相组成,对于极细的粉末等特殊物料,还需要粒度分析等辅助试验,确定其产生来源。如果确定属于金属冶炼过程中产生的副产物、污染控制设施或环境治理过程中产生的物料、含金属废料简单加工处理产物、矿物采选过程中产生的废弃物,那么鉴别物料属于固体废物。