Resistance and biosorption mechanism of silver ions by Bacillus cereus biomass

Biosorption of silver ions onto Bacillus cereus biomass was investigated. Overall kinetic experiments were performed for the determination of the necessary contact time for the attainment of equilibrium. It was found that the overall biosorption process was best described by pseudo second-order kinetic model. The crystals detected by scanning electron microscope and X-ray photoelectron spectroscopy suggested the precipitation was a possible mechanism of biosorption. The molecular genetics of silver resistance of B. cereus biomass was also detected and illustrated by a whole cell sensor tool.     

响应面法优化复合微生物吸附剂对低浓度Cr3+的吸附

根据已有4种微生物吸附剂的吸附基团存在的差异特征,将其复配成复合吸附剂,借助统计学方法研究其对低ρ(Cr3+)废水的吸附性能.在单因素试验基础上,利用P-B(Plackett-Burman)法筛选出吸附过程4个主要影响因素分别为pH,初始ρ(Cr3+)及微生物吸附剂XB和TQ的投加量,应用最陡爬坡试验接近主要因素最优水平,采用Box-Behnken试验设计和响应面分析得到对低浓度Cr3+吸附过程的二阶模型.结果表明,最优吸附条件为pH 4.0,初始ρ(Cr3+)为4.86mg/L,XB和TQ的投加量分别为0.20和0.13 g/L,实际吸附率达到87.54%,与理论预测值(87.68%)接近,且高出单一吸附剂吸附率7.79%～17.35%.FT-IR扫描显示,复合微生物吸附剂性能提高与表面基团增多有关.通过响应面分析法优化复合微生物吸附,吸附性能明显提高.     

酵母融合菌对Cr的吸附性能及机理分析

研究了酵母融合菌R32对Cr的吸附性能及机理.结果表明,该菌对Cr(Ⅵ)有着很好的吸附效果,最佳吸附条件为pH≤3,投菌量为l0g/L(含水率(78±2)%),吸附温度30～35℃,Cr(Ⅵ)的初始浓度≤20mg/L.当Cr(Ⅵ)的初始浓度为10mg/L时,总铬及Cr(Ⅵ)的去除率达93.7%和96.5%,总铬的残留浓...     

水华蓝藻生物质对Cu~(2+)的吸附动力学及吸附平衡研究

文章初步研究了水华蓝藻生物质对重金属离子Cu2+的吸附特性,包括生物吸附动力学和吸附等温线。生物吸附动力学结果表明,Cu2+的生物吸附可分为两个阶段,第一个阶段能较快地达到平衡,而之后的阶段进行缓慢。透析袋处理的蓝藻生物质在不同pH(3,4,5,6)的铜离子溶液条件下,吸附效率依次为62.4%,78.1%,71.2%,60.35%,吸附最大值为7.81 mg/g。水华蓝藻生物质对Cu2+的生物吸附平衡等温线可以用Freundlich模型精确拟合。水华蓝藻生物质在处理低浓度的含Cu2+废水方面有潜力。湖泊富营养化的优势在于产生低成本的、大量的、可收集的水华,这说明自然环境中的藻类资源如蓝藻水华生物质,可能作为商业中使用的生物吸附剂。     

Effect of a high strength chemical industry wastewater on microbial community dynamics and mesophilic methane generation

A high strength chemical industry wastewater was assessed for its impact on anaerobic microbial com- munity dynamics and consequently mesophilic methane generation. Cumulative methane production was 251 mL/g total chemical oxygen demand removed at standard temperature and pressure at the end of 30 days experimental period with a highest recorded methane percentage of 80.6% of total biogas volume. Volatile fatty acids （VFAs） analysis revealed that acetic acid was the major intermediate VFAs produced with propionic acid accumulating over the experimental period. Quantitative analysis of microbial communities in the test and control groups with quantitative real time polymerase chain reaction highlighted that in the test group, Eubacteria （96.3%） was dominant in comparison with methanogens （3.7%）. The latter were dominated by Methanomicrobiales and Methanobacteriales while in test groups increased over the experimental period, reaching a maximum on day 30. Denaturing gradient gel electrophoresis profile was performed, targeting the 16S rRNA gene of Eubacteria and Archaea, with the DNA samples extracted at 3 different time points from the test groups. A phylogenetic tree was constructed for the sequences using the neighborhood joining method. The analysis revealed that the presence of organisms resembling Syntrophomonadaceae could have contributed to increased production of acetic and propionic acid intermediates while decrease of organisms resembling Pelotomaculum sp. could have most likely contributed to accumulation of propionic acid. This study suggested that the degradation of organic components within the high strength industrial wastewater is closely linked with the activity of certain niche microbial communities within eubacteria and methanogens.     

Potential bioremediation of mercury-contaminated substrate using filamentous fungi isolated from forest soil

The use of filamentous fungi in bioremediation of heavy metal contamination has been developed recently. This research aims to observe the capability of filamentous fungi isolated from forest soil for bioremediation of mercury contamination in a substrate. Six fungal strains were selected based on their capability to grow in 25 mg/L Hg2+-contaminated potato dextrose agar plates. Fungal strain KRP1 showed the highest ratio of growth diameter, 0.831, thus was chosen for further observation.Identification based on colony and cell morphology carried out by 18S rRNA analysis gave a 98%match to Aspergillus flavus strain KRP1. The fungal characteristics in mercury(Ⅱ) contamination such as range of optimum pH, optimum temperature and tolerance level were 5.5–7 and 25–35℃ and 100 mg/L respectively. The concentration of mercury in the media affected fungal growth during lag phases. The capability of the fungal strain to remove the mercury(Ⅱ) contaminant was evaluated in 100 mL sterile 10 mg/L Hg2+-contaminated potato dextrose broth media in 250 mL Erlenmeyer flasks inoculated with 108spore/mL fungal spore suspension and incubation at 30℃ for 7 days. The mercury(Ⅱ) utilization was observed for flasks shaken in a 130 r/min orbital shaker(shaken) and nonshaken flasks(static) treatments. Flasks containing contaminated media with no fungal spores were also provided as control. All treatments were done in triplicate. The strain was able to remove 97.50%and 98.73% mercury from shaken and static systems respectively. A. flavus strain KRP1 seems to have potential use in bioremediation of aqueous substrates containing mercury(Ⅱ) through a biosorption mechanism.     

锌铜胁迫对Bacillus vallismortis EPS组分变化特征及其吸附性能的影响

近年来,微生物胞外聚合物(EPS)在吸附重金属方面的潜能引起了人们的广泛关注,但关于重金属对微生物及其EPS特性的影响鲜有报道.Bacillus vallismortis对锌铜矿捕收剂苯胺黑药具有良好的降解能力.为了解重金属对菌株的胁迫影响,探讨二者之间的相互作用,研究了Zn(Ⅱ)、Cu(Ⅱ)胁迫对菌株EPS产量、组分变化特征及其吸附性能的影响.结果表明,在Zn(Ⅱ)胁迫下,菌株培养至稳定期产生的EPS最多,当Zn(Ⅱ)为12 mg·L~(-1)时EPS产量翻倍,达到100.84 mg·g~(-1)(以VSS计),Zn(Ⅱ)能刺激菌株产生更多富含—COOH和—OH的胞外多糖;菌株在Cu(Ⅱ)胁迫下需培养至对数期产生的EPS最多,在Cu(Ⅱ)为6 mg·L~(-1)情况下EPS产量最高为60.65 mg·g-1(以VSS计),Cu(Ⅱ)的胁迫作用提高了菌株EPS中富含N—H和C—N的蛋白质含量;吸附实验结果表明,2种金属能通过胁迫菌株产生特异性EPS,为金属离子提供大量适用性结合点位,显著提高对重金属的去除能力.研究结果对应用生物法处理同时含有重金属和有机物的复合型选矿废水具有一定的指导意义.     

L形和U形三维钝体结构绕流的数值模拟研究

采用大涡模型对L形和U形三维钝体建筑物的绕流特性和风压分布特性进行数值研究.考虑平均和脉动速度入口边界,在雷诺数为1.5×105～7×105条件下,对2种钝体的9种分析工况进行瞬态动力分析,并将计算结果与已有研究进行对比.研究表明,钝体绕流对周围流场影响的强弱程度依次为尾流区、屋顶区、来流区,影响大小随着流场与钝体之间...     

热阻力概念的修正及计算方法

以隧道火灾为背景,对一维加热管流中的热阻力进行了研究。通过压力场数值模拟与理论分析,直接证实了热阻力的存在,并表明传统概念上的热阻力明显大于实际的能量损失。根据能量方程提出水平无粘管流的热阻力应等于气流经过加热区的全压力降,而非静压力降;等截面管流的热阻力大小应为传统热阻力值的1/2。这一修正使热阻力概念具有了严格的流体力学意义。在定义新的热阻力系数基础上,建立了2个热阻力系数表达式及低马赫数条件下热阻力的近似表达式。将该近似表达式与热损失方程进行对比,表明两者在低马赫数条件下具有一致性。研究成果进一步发展了热阻力理论体系,对隧道火灾及其它相关工程热物理问题的研究与应用都具有重要价值。     

变压器油池火燃烧规律的实验研究*

为对变压器油池火灾进行准确有效的灭火,研究不同尺寸和不同厚度下变压器油的火灾动力学特征和基本燃烧特性,具体分析变压器油的燃烧过程和变压器油燃烧速率、火焰温度以及辐射热流随油池直径以及厚度的变化规律。结果表明:整个油品的燃烧过程分为预热燃烧阶段、稳定燃烧阶段和火焰熄灭阶段。对于厚度大于10 mm的油池燃烧,稳定阶段的燃烧速率与油层厚度无关,稳定阶段的燃烧速率随着油池直径的增加而增加。同时,变压器油火灾连续火焰区温度接近750 ℃。对于稳定燃烧阶段下的变压器油燃烧,基于辐射通量可得出在燃烧过程中,辐射热量占总燃烧热的占比约为1/3。研究结果可丰富变压器油燃烧的基础数据,为变压器火灾的灭火提供参考。