新型封孔材料的性能研究及封孔长度计算

研究聚氨酯硬泡材料的渗透性能和粘结性能,旨在为煤矿瓦斯抽放和煤层注水工艺提供本质安全型的封孔材料,从而提高瓦斯抽放和煤层注水的效果,做好瓦斯、煤尘灾害的预防工作。根据达西定律设计材料渗流量的测试实验,将测定的数据进行线性拟合后,得出聚氨酯硬泡材料的渗透系数为1.00546×10-6cm/s;通过材料的抗压剪切力测试,得出聚氨酯硬泡与煤的粘结强度为387.95kPa;根据封孔模拟实验结果,选择压注药液法作为封孔方法,并根据钻孔受力平衡原则,计算得出由聚氨酯硬泡作为封孔材料的封孔长度至少为0.967m。     

Effect of saline water ionic strength on phosphorus recovery from synthetic swine wastewater

Declining worldwide phosphate rock reserves has driven a growing interest in exploration of alternative phosphate supplies. This study involved phosphorus recovery from swine wastewater through precipitation of struvite, a valuable slow-release fertiliser. The economic feasibility of this process is highly dependent on the cost of magnesium source. Two different magnesium sources were used for phosphorus recovery: pure magnesium chloride and nanofiltration(NF) saline water retentate. The paper f...     

金属-复合材料胶接结构老化脱黏行为研究进展

从加速老化试验方法、胶接结构老化规律研究以及界面脱黏数值模拟3个方面回顾了过去对于胶接结构老化脱黏行为的相关研究。重点介绍了模拟老化的各类人工加速试验方法,常用的针对老化加速试验的寿命评估模型,以及胶接结构老化后材料性能退化的规律研究。还介绍了采用虚拟裂纹闭合技术（VCCT）、内聚力模型（CZM）以及渐近损伤方法（PDM）模拟结构脱黏行为的研究现状。最后,对胶接结构老化脱黏行为的研究进行了总结与展望。     

日本标准贯入试验方法及其N值在岩土工程中的应用

标准贯入试验是国际上普遍采用的一种简单、快捷、经济的原位动力触探技术,在日本岩土工程勘察中是必做的现场试验,所得的标准贯入击数N值可以客观地确定土的软硬、密实程度等,并可通过数据的积累和回归分析,利用N值推求土的物理力学参数和进行地基评价.本文重点介绍了日本最新标准贯入试验方法的修订要点,以及N值与砂性土、黏性土和软岩...     

Operation of three parallel AN/AO processes to enrich denitrifying phosphorus removing bacteria for low strength wastewater treatment

Three parallel anaerobic-anoxic/anaerobic-aerobic （AN/AO） processes were developed to enrich denitrifying phosphorus removal bacteria （DPB） for low strength wastewater treatment. The main body of the parallel AN/AO process consists of an AN （anaerobic-anoxic） process and an AO （anaerobic-aerobic） process. In the AO process, the common phosphorus accumulating organisms （PAOs） was dominate, while in the AN process, DPB was dominate, The volume of anaerobic zone（Vana）：anoxie zone（Vano） ： aerobic zone （Vaer） for the parallel AN/AO process is 1：1：1 in contrast with a Vana：Vaer and Vano：Vaer of 1：2 and 1：4 for a traditional biological nutrient removal process （BNR）. Process 3 excels in the 3 processes on the basis of COD, TN and TP removal. For 4 month operation, the effluent COD concentration of process 3 did not exceed 60 mg/L; the effluent TN concentration of process 3 was lower than 15 mg/L; and the effluent TP concentration of process 3 was lower than 1 mg/L.     

Quantification of sources of PCBs to the atmosphere in urban areas: A comparison of cities in North America, Western Europe and former Yugoslavia

We present estimated emission source strengths of seven polychlorinated biphenyl (PCB) congeners for Banja Luka, a city that was affected by the civil war in Bosnia and Hercegovina (former Yugoslavia) in the 1990s. These emission estimates are compared to PCB emission rates estimated for the cities of Zurich, Switzerland, and Chicago, USA using an approach that combines multimedia mass balance modeling and measurement data. Our modeled per-capita emission estimates for Banja Luka are lower by a factor of ten than those for Zurich and Chicago, which are similar. This indicates that the sources of PCB emissions in Banja Luka are likely to be weaker than in the Western European and North American cities which show relatively high PCB emissions. Our emission rates from the three cities agree within a factor of ten with emission estimates from a global PCB emission inventory derived from production and usage estimates and emission factors.     

Food web structure affects the extinction risk of species in ecological communities

This paper studies the effect of food web structure on the extinction risk of species. We examine 793 different six-species food web structures with different number, position and strength of trophic links and expose them to stochasticity in a model with Lotka–Volterra predator–prey dynamics. The characteristics of species (intrinsic rates of increase as well as intraspecific density dependence) are held constant, but the interactions with other species and characteristics of the food web are varied.     

污泥渗水砖的制备研究

结合压制成型和传统的烧结砖工艺,实验以城市生活污泥、黄河淤泥、煤矸石及砂为原料,制备渗水铺地砖。通过正交试验得到最优工艺参数为w_{(黄河淤泥)}∶ww_(煤矸石)∶w_(污泥)∶w_(砂)＝33％∶22％∶15％∶30％、成型压力为20 MPa、烧结温度为1 100℃、保温时间为1.5 h,骨料砂的粒径为1～2 mm。制备的成品抗压强度为21.8 MPa,渗水系数为1.03×10^－2 cm/s。并对成型压力及烧结温度对渗水砖抗压强度及渗水系数的影响进行了讨论。     

Colloid transport in unsaturated porous media: the role of water content and ionic strength on particle straining

Packed column and mathematical modeling studies were conducted to explore the influence of water saturation, pore-water ionic strength, and grain size on the transport of latex microspheres (1.1 microm) in porous media. Experiments were carried out under chemically unfavorable conditions for colloid attachment to both solid-water interfaces (SWI) and air-water interfaces (AWI) using negatively charged and hydrophilic colloids and modifying the solution chemistry with a bicarbonate buffer to pH 10. Interaction energy calculations and complementary batch experiments were conducted and demonstrated that partitioning of colloids to the SWI and AWI was insignificant across the range of the ionic strengths considered. The breakthrough curve and final deposition profile were measured in each experiment indicating colloid retention was highly dependent on the suspension ionic strength, water content, and sand grain size. In contrast to conventional filtration theory, most colloids were found deposited close to the column inlet, and hyper-exponential deposition profiles were observed. A mathematical model, accounting for time- and depth-dependent straining, produced a reasonably good fit for both the breakthrough curves and final deposition profiles. Experimental and modeling results suggest that straining--the retention of colloids in low velocity regions of porous media such as grain junctions--was the primary mechanism of colloid retention under both saturated and unsaturated conditions. The extent of stagnant regions of flow within the pore structure is enhanced with decreasing water content, leading to a greater amount of retention. Ionic strength also contributes to straining, because the number of colloids that are held in the secondary energy minimum increases with ionic strength. These weakly associated colloids are prone to be translated to stagnation regions formed at grain-grain junctions, the solid-water-air triple point, and dead-end pores and then becoming trapped.     

城市河涌受污染底泥的固化/稳定化处理

为了给河涌疏浚底泥的资源化提供技术支持,以广州市车陂涌表层受污染底泥为研究对象,用水泥、石灰、粉煤灰、膨润土等材料对底泥进行固化/稳定化处理实验。通过无侧限抗压强度、污染物在模拟自然条件下(中性)的释放特征、毒性浸出实验(酸性条件)对固化/稳定化处理效果进行综合分析。结果表明:经合适的处理后,固化体抗压强度能高于300 kPa;固化体自然条件下重金属的释放量明显减少,固化/稳定化处理能够有效减缓和减少固化体的二次污染;毒性浸出实验结果表明,河涌底泥经固化/稳定化处理后其重金属浸出能力显著降低。