废旧阴极射线管(CRT)显示器玻壳中铅浸出特性研究

CRT显示器玻壳中含有大量的铅,废旧CRT显示器玻壳被列为危险废物。采用4种浸提方法(水平振荡法(GB5086.2-1997)、翻转法(GB5086.1-1997)、硫酸硝酸法(HJ/T299-2007)、醋酸缓冲溶液法(HJ/T300-2007))研究CRT显示器玻壳中铅的浸出特性。同时探讨浸提液pH和pH缓冲能力、振荡方式、CRT玻壳颗粒粒径、液固比、浸提时间对CRT玻壳颗粒中的Pb浸出的影响。结果表明:上述4种方法浸提液中Pb的平均浓度分别为0.07、0.69、1.64、11.33 mg/L。随着醋酸缓冲液初始pH值从4.0升高到7.0,其浸提的Pb的含量呈现出逐渐下降的趋势。而去离子水的pH值低于5时,其浸提的Pb的含量才明显升高。Visual MINTEQ模型计算结果表明:在去离子水和硫酸硝酸混合液浸提过程中,主要以酸碱反应为主;而在醋酸缓冲液浸提过程中,以酸碱反应和络合反应为主。前3种浸提方法使用的浸提液类似于天然水环境或降水,其浸提的Pb浓度高于地下水环境质量III标准。第4种浸提方法模拟垃圾填埋场环境,其浸提的Pb的浓度高于工业固废最高容许浸出浓度。因此,废旧CRT玻壳无论填埋处置或直接进入土...     

生活垃圾分类背景下对广州市废玻璃回收利用的思考

废玻璃是一种载能节能、低碳环保、可重复利用和再生利用的再生资源,广州市通过补贴政策、两网融合等手段,促进废玻璃回收利用,随着生活垃圾分类纵深推进,为了进一步提高废玻璃回收利用,从废玻璃回收利用现状入手,对比了北京、上海生活垃圾中废弃玻璃的占比情况,针对目前存在问题,提出废玻璃回收利用分析与建议.     

Real time alteration of a nuclear waste glass and remobilization of lanthanide into an interphase

The development of predictive models for the long term evolution of nuclear waste glass requires the complete knowledge of the glass dissolution at the laboratory scale. A new approach was developed to determine the initial reaction during the first steps of experience, a new concept was developed, based on the combination of dynamic leaching test and the characterization of the altered materials. With this experimental set-up it is possible to follow in real time the glass alteration process at a fine temporal scale. The results put in evidence a singular behaviour of the lanthanide, shown by a concentration peak of La, Nd and Ce after 2 h and a quick decrease of their concentration measured on line in the solution during the leaching test. This fact is directly linked to the development of an interphase (altered layer which differs from the initial solid by its texture, structure and chemical composition) at the interface of the glass surface and the leaching solution. This work is an attempt to integrate the formation of the alteration products (here the interphase) during leaching into the dissolution mechanisms of a nuclear waste glass. A model is proposed and discussed.     

玻璃纤维-铝合金层合板氙灯老化性能研究

目的研究氙灯环境对玻璃纤维-铝合金层合板性能的影响。方法通过研究玻璃纤维-铝合金层合板在氙灯老化后的力学性能、基体红外光谱、铝合金表面形貌及元素变化,分析层合板的氙灯老化机理。结果随氙灯老化时间的延长,树脂基体老化降解程度越高,树脂与纤维、铝合金的界面强度下降,使材料拉伸及弯曲性能降低,拉伸强度受老化影响最为显著的是正交结构层合板,老化84 d后强度降低13.7%,正交结构0°方向层合板的弯曲强度受氙灯老化影响降低4.6%,其他试样的弯曲强度降幅均低于5%,氙灯老化后的铝合金层表面的微凹坑数量及尺寸无明显变化,但凹坑氧元素随老化周期延长略微增加。结论氙灯环境主要影响玻璃纤维-铝合金层合板中的复合材料层及各界面,树脂基体的降解导致力学性能的衰退,而对于铝合金的影响并不明显。     

Test for the effects of three surfactants on the penetration ability of the calcium chloride and water glass solutions in dust

１ＩｎｔｒｏｄｕｃｔｉｏｎＣａｌｃｉｕｍｃｈｌｏｒｉｄｅｉｓｏｆｔｅｎｕｓｅｄｉｎｔｈｅｆｉｅｌｄｏｆｓｏｉｌｓｔａｂｉｌｉｚａｔｉｏｎａｎｄｒａｉｓｉｎｇｄｕｓｔｃｏｎｔｒｏｌｂｅｃａｕｓｅｉｔｃａｎｒｅａｃｔｗｉｔｈｗａｔｅｒｇｌａｓ（Ｗｕ，１９...     

叠氮增塑剂/硝化棉共混物的分子动力学模拟

目的 揭示叠氮增塑剂与硝化棉的相互作用机理,探索叠氮类增塑剂结构与性能间的关系,筛选能量性能和稳定性均较好的叠氮化合物。方法 建立硝化棉(NC)、1,3–二(叠氮乙酰氧基)–2–甲基–2–硝基丙烷(DAMNP)、1,3–双(叠氮乙酰氧基)–2–乙基–2–硝基丙烷(ENPEA)和1,8–二叠氮基–3,6–氧杂辛烷(AZTEGDN)纯物质模型以及NC/DAMNP、NC/ENPEA、NC/AZTEGDN共混物体系的微观分子模型,利用分子动力学模拟(MD)方法,对叠氮增塑剂/硝化棉的微观性质进行预测。分析共混体系的溶度参数、MSD值、结合能、径向分布函数、力学性能和玻璃化转变温度等性能。结果 DAMNP、ENPEA、AZTEGDN与NC之间的溶度参数差值较小。ENPEA与NC的结合能最大,DAMNP次之,AZTEGDN最小。3种增塑剂与NC的相互作用主要为vd W相互作用。加入增塑剂分子可以改善NC的运动能力,由于AZTEGDN的分子结构体积小,改善效果明显。径向分布函数分析结果进一步证明,NC与增塑剂分子间存在较强的氢键作用。结论 添加叠氮增塑剂可以改善NC的运动能力、力学性能,降低NC的玻璃化转变温度,起到了良好的增塑效果。     

Experimental study of recycling lightweight concrete with aggregates containing expanded glass

The focus is on the issue of waste management when constructing and recycling lightweight concrete (LWC) with aggregates containing expanded glass. The paper analyses the recycling of concrete from lightweight aggregates, and on the important issue of environmental and waste management. The characteristics of recycling LWC such as density, compressive strength and thermal conductivity are investigated, and compared with normal existing concrete from lightweight aggregates. The results indicate that it is possible to recycle lightweight concrete construction waste. The described method shows great possibilities for increasing the use of construction waste materials from LWC containing expanded glass, in order to benefit from better use of the available capacity from existing construction waste. The characteristics of density, compressive strength and thermal conductivity from the new recycled material were compared with normal existing concrete from lightweight aggregates, such as changes in dependency on the type and parts of waste as well as its new binding components. Thus, a new recycled material has been created with new characteristics of density, compressive strength and thermal conductivity, which is conform to the compressive strength class and rules on heat protection and energy efficiency use in buildings (SI OJ RS No. 42/2002). Laboratory density, compressive strength, and thermal conductivity tests results showed that LWC can be produced by the use of waste LWC with aggregates containing expanded glass. However, the use of waste LWC with aggregates containing expanded glass seems to be necessary for the production of cheaper and environmentally friendly LWC.     

过滤捕集法处理含DEP雾废气的研究

为了探讨玻璃纤维过滤器处理含DEP雾废气的效率问题,在实验室进行了DEP雾去除实验。考查了不同气体入口浓度、过滤流速下玻璃纤维过滤捕集装置对含DEP雾废气的净化能力,结果表明:利用玻璃纤维过滤器去除DEP雾,在DEP雾粒径主要分布为0.48～3.4μm之间,DEP雾浓度小于220 mg/m3,过滤流速小于10 cm/s情况下,玻璃纤维过滤器对DEP雾的去除率大于99%,最大气体流量下的压力降小于1610Pa;同时对含油(酸)雾废气除雾效果好,特别是对于粒径特别细微的油(酸)雾,捕集效率也很高,还可回收利用,不会产生二次污染。     

玻璃熔窑SCR烟气脱硝设计的影响因素分析

对影响玻璃熔窑SCR烟气脱硝设计的几个主要因素,如烟气条件（烟气量和NOx初始浓度）、还原剂、催化剂、SCR反应器布置方式及催化剂吹灰方式等进行了分析与讨论,指出在对玻璃熔窑进行SCR烟气脱硝设计时应根据燃料情况、烟气条件、生产工艺、环保法规及污染物减排要求等合理进行选择,以确保玻璃熔窑SCR烟气脱硝系统安全运行及工程投资、运行费用的经济合理性。     

Solar driven nitrous acid formation on building material surfaces containing titanium dioxide: A concern for air quality in urban areas?

The photoenhanced uptake of nitrogen dioxide (NO₂) to the surface of commercially available self-cleaning window glass has been studied under controlled laboratory conditions. This material is one of an array of modern building products which incorporate titanium dioxide (TiO₂) nanoparticles and are finding increasing use in populated urban areas. Amongst the principal drivers for the use of these materials is that they are thought to facilitate the irreversible removal of pollutants such as NO₂ and organic molecules from the atmosphere and thus act to remediate air quality. While it appears that TiO₂ materials do indeed remove organic molecules from built environments, in this study we show that the photoenhanced uptake of NO₂ to one example material, self-cleaning window glass, is in fact accompanied by the substantial formation (50–70%) of gaseous nitrous acid (HONO). This finding has direct and serious implications for the use of these materials in urban areas. Not only is HONO a harmful respiratory irritant, it is also readily photolysed by solar radiation leading to the formation of hydroxyl radicals (OH) together with the re-release of NO_x as NO. The net effect of subsequent OH initiated chemistry can then be the further degradation of air quality through the formation of secondary pollutants such as ozone and VOC oxidation products. In summary, we suggest that a scientifically conceived technical strategy for air quality remediation based on this technology, while widely perceived as universally beneficial, could in fact have effects precisely opposite to those intended.