混凝-膜过滤中滤饼层对双酚A的去除强化作用研究

以聚合氯化铝(PAC)和氯化铁(FeCl3)为混凝剂,分析了双酚A(BPA)在1g/L高岭土溶液混凝过程中的特征.并借助循环错流过滤强化污染层累积的方法,评价产生滤饼层的微滤(MF)膜对BPA的截留效果.结果表明:清洁的微滤膜过滤BPA溶液在短时间内达到截留吸附饱和,之后其对BPA的吸附截留作用显著降低;混凝絮体混合液经膜过滤时产生的污染层有利于BPA的去除,且单独混凝对BPA去除率最高的混凝剂投加量下进行膜过滤时的阻力较小.PAC混凝—膜过滤后BPA去除率比单独混凝提高了34.30%;FeCl3混凝—膜过滤后BPA去除率比单独混凝提高了28.38%.初始BPA浓度对混凝-膜过滤去除率有一定影响,BPA浓度为100μg/L时,比BPA浓度为5mg/L时采用2种混凝-微滤膜过滤方式去除率均有提高.     

间距对上保护层开采保护效果影响的相似模拟实验研究

为研究上保护层开采保护效果随层间距的变化规律,以南桐矿区作为实验背景,保持保护层倾向工作面开挖长度、煤层埋深、倾角、岩层物理力学性质相同,将层间多层岩层处理为复合岩层,分别进行近距离、远距离和超远距离上保护层开采相似模拟实验。综合分析被保护层卸压规律及基于被保护层垂直于层面的膨胀变形保护准则所得保护范围可知:上保护层开采被保护层卸压曲线呈“凸形”,且“凸形”中心线偏向下山方向。随层间距增加,“凸形”底部被保护层小于原岩应力的卸压范围与“凸形”顶部卸压曲线顶部较大卸压的范围均呈减小趋势;两者中心位置均向下山方向转移,且后者转移度大于前者;被保护层卸压曲线中卸压范围的卸压程度及应力集中范围的应力集中程度均呈减弱趋势;以垂直层面的膨胀变形量3‰确定的上下边界膨胀变形保护角均小于《防治煤与瓦斯突出规定》中相应条件的卸压角,因此以该方法确定的保护范围相对《防治煤与瓦斯突出规定》偏于安全,且随层间距增加保护范围长度呈加速减小趋势。     

沈阳地区霾的环境特征研究

利用沈阳市1961—2009年的气象资料,分析了霾天气出现的年季特征及其天气形势特征。利用边界层气象资料与污染物质量浓度资料对特定的霾过程从边界层到污染物质量浓度条件进行了分析。结果表明：沈阳地区霾的出现呈现逐年上升的趋势,近5 a平均每年为120 d左右,目前霾天数已经占到了全年的30%~40%。冬秋季节出现霾天气较多,秋冬两季霾日数占全年霾日总数的75%。凌晨到上午是霾出现的高发期,02—08时霾出现频率占总霾数的44.5%。霾的出现主要发生在冬秋季节冷空气势力不强,大气扩散能力较弱,边界层出现逆温时刻。接地逆温层厚度常常稳定在200~300 m高度左右,PM10质量浓度与能见度（霾）呈负相关,相关系数-0.402 7。风速与能见度（霾）呈正相关,相关系数为0.886 4。     

静电除尘器的粉尘非稳态收集过程

为了全面揭示电除尘器粉尘非稳态收集过程,建立完整的非稳态静电收尘理论,根据静电学基本原理,研究了极板粉尘层电荷导人、积累、释放的过程,推导出随粉尘层厚度增长而改变的动态收尘电场强度计算公式,进而得到荷电粒子动态驱进速度公式,最终形成静电除尘非稳态收集理论.研究结果表明,在静电收尘过程中,粒子驱进速度与粉尘比电阻、工作电压、粉尘层厚度等多种因素有关;随粉尘比电阻的升高,收尘效率下降,当供电电压为最佳工作电压时收尘效率最高.针对不同比电阻粉尘进行了多项实验研究,实验结果与理论研究结果吻合.非稳态静电收尘理论成功地解释了实际静电收尘过程中与传统静电收尘理论相矛盾的地方,为静电除尘器的设计及其运行参数的选取提供了更为科学的理论基础.     

Water purification with sintered porous materials fabricated at 400℃ from sea bottom sediments

A sintering technology for preparing porous materials from sea bottom sediments was developed for use in water purification. The purpose of the present study was to develop methods for converting the sea bottom sediments dredged from Ago Bay into value-added recycled products. The sintered products fabricated at 400℃ were found to be very effective adsorbents for the removal of heavy metals.     

Sudden high concentration of TSP affected by atmospheric boundary layer in Seoul metropolitan area during duststorm period

Hourly concentrations of TSP, PM(10), PM(2.5) near the surface at Seoul city were examined from March 20 to March 25, 2001 (duststorm event) in order to investigate the effect of a duststorm generated in China on the local aerosol concentration in Korea, The ratios of fine to coarse particles such as TSP to PM(10), TSP to PM(2.5) and PM(10)-PM(2.5) to PM(2.5) showed that a great amount of dust transported from the origin of the duststorm was remarkable with a maximum ratio of 9.77 between TSP and PM(2.5). Back trajectories every 6 h showed the movement of dust particles in the lower atmosphere near 500 m to 1500 m (atmospheric boundary layer), which implied transport from Baotou in inner Mongolia of northern China to the direction of Seoul city in Korea and then the back trajectories passed near the southern border of Mongolia and Baotou through Zengzhou in the midlevels (3000 m) and low levels (500 m) of China, finally reaching Seoul city. So, the TSP concentration at Seoul city was partially influenced by the duststorm, under the prevailing westerly wind and the transported aerosols could influence high concentrations of pollutants of TSP, PM(10) and PM(2.5) in Seoul. The sudden high concentrations of TSP and PM(10) were found for a few hours, especially at 1500 to 1800 LST, March 22. At 1200 LST, before the passage of a cold front through the Korean peninsula, the convective boundary layer (CBL) near Seoul was not shallow, but at 1500 LST, under the frontal passage, the CBL was remarkably thinner (less than 300 m), due to the compression of the boundary layer by the intrusion of cold air. This resulted in the increase of the TSP concentration, even though the mixed layer above maintained almost the same depth. At 1800 LST shortly after the frontal passage, that is, near sunset, the nocturnal cooling of the ground caused air parcels to cool, thereby enhancing the shallower nocturnal surface inversion layer and producing the maximum concentration of TSP of 1388 microg/m(3) near Seoul city.     

Integrating soil carbon cycling with that of nitrogen and phosphorus in the watershed model SWAT: Theory and model testing

In this paper we describe and test a sub-model that integrates the cycling of carbon (C), nitrogen (N) and phosphorus (P) in the Soil Water Assessment Tool (SWAT) watershed model. The core of the sub-model is a multi-layer, one-pool soil organic carbon (S_C) algorithm, in which the decomposition rate of S_C and input rate to S_C (through decomposition and humification of residues) depend on the current size of S_C. The organic N and P fluxes are coupled to that of C and depend on the available mineral N and P, and the C:N and N:P ratios of the decomposing pools. Tillage explicitly affects the soil organic matter turnover rate through tool-specific coefficients. Unlike most models, the turnover of soil organic matter does not follow first order kinetics. Each soil layer has a specific maximum capacity to accumulate C or C saturation (S_x) that depends on texture and controls the turnover rate. It is shown in an analytical solution that S_x is a parameter with major influence in the model C dynamics. Testing with a 65-yr data set from the dryland wheat growing region in Oregon shows that the model adequately simulates the S_C dynamics in the topsoil (top 0.3 m) for three different treatments. Three key model parameters, the optimal decomposition and humification rates and a factor controlling the effect of soil moisture and temperature on the decomposition rate, showed low uncertainty as determined by generalized likelihood uncertainty estimation. Nonetheless, the parameter set that provided accurate simulations in the topsoil tended to overestimate S_C in the subsoil, suggesting that a mechanism that expresses at depth might not be represented in the current sub-model structure. The explicit integration of C, N, and P fluxes allows for a more cohesive simulation of nutrient cycling in the SWAT model. The sub-model has to be tested in forestland and rangeland in addition to agricultural land, and in diverse soils with extreme properties such high or low pH, an organic horizon, or volcanic soils.     

厚煤层分层综采工作面的瓦斯治理

结合矿井瓦斯管理的实际,介绍了高瓦斯厚煤层分层综采工作面瓦斯治理的技术经验,具有很强的针对性和可操作性,实现了矿井在特殊阶段的安全生产.     

基于在线检测信息的储罐底板腐蚀状态智能评价方法

为了解决利用声发射在线检测技术对储罐底板腐蚀状态进行评价时,主要依赖检测人员经验的问题,使该项技术能更好地推广和应用,利用储罐底板在线检测的声发射信息和外观检查信息,并根据相关标准及专家经验,确定与储罐底板腐蚀状态相关的表征因素。采用遗传算法(GA)改进贝叶斯网络(BN)搜索方法,建立基于GA的BN智能评价方法。针对声发射在线检测信息和外观检查信息,分别建立基于标准用声发射因素、基于声发射因素和综合考虑声发射因素和外观检查因素的基于在线检测信息的储罐底板腐蚀状态评价模型。通过对测试样本的评价,对比声发射检测专家评价结果,其中基于在线检测信息的储罐底板腐蚀状态评价模型的准确率为96%,该模型能够对储罐底板腐蚀状态进行可靠的智能评价。     

保护层分析中独立保护层的识别研究

为阐述保护层分析(LOPA)中独立保护层(IPL)的识别规则,以及这些规则在实际应用中要注意的问题,以生产聚氯乙烯(PVC)的间歇聚合反应为例,对8个不同的LOPA场景进行分析,给出不同场景的IPL和要求时的失效概率(PFD),以及建议增加的IPL。分析结果表明,在进行IPL的识别时,应重点确认IPL的有效性和独立性。在评估IPL有效性时,应关注具有共同元件的IPL,IPL的行动能力、人员行动有效性及IPL的PFD等。在评估独立性时,应确保IPL独立于初始事件和同一场景中的其他IPL的任何构成元件。通过分析,发现PVC工艺中安全阀(PSV)设计、安全仪表功能(SIF)设计和人员行动等IPL中存在的问题,并提出相应的建议。