Geochemical Characteristics of the Acid Mine Drainage in the Water System in the Vicinity of the Dogye Coal Mine in Korea

This study investigated geochemical characteristics of the acid mine drainage (AMD) discharged from the abandoned mine adits in the vicinity of the Dogye coal mine in Korea. Acid mine drainage discharged from Jeoncha pit adit of the Dogye coal mine, which is the main source of the AMD in the study area, had a pH value of 3.0 and concentrations of 2148mg SO₄ ^2– L^–1, 229mg Fe L^–1, 71mg A1 L^–1 and 11mg Mn L^–1. The reduction of some metal concentrations downstream from the discharge point could be explained on the basis of dilution and precipitation. The order of removal of metal ions downstream from the discharge point was Fe>A1, Cu>Zn, Mn. Acidity could be used as a good determining factor offering comprehensive and quantitative values for the polluting extent of acid mine drainage. The acidities existing in all acidic water samples in the Gunahan district originated primarily from mineral acidity, especially in the upper Nahan Creek from dissolved Fe and Al and in the middle and down Nahan Creek from dissolved Al. From the application of the WATEQ4F program, it was determined that predominant species of dissolved Fe in all water samples was Fe²⁺, and those of dissolved Al were AlSO₄ ⁺ and Al³⁺ except for IW2 sample which was associated with white precipitates. The species of dissolved Al in IW2 sample include also AlOH²⁺ and Al(OH)₂ ⁺. The saturation indices of goethite and haematite were positive in the water samples associated with ochrous precipitates (usually called Yellow Boy), therefore these solids might be precipitated. For the IW2 sample, the saturation indices of amorphous Al(OH)₃ and gibbsite were positive, so theoretically these solids might also be precipitated. By XRD analysis, it was found that goethite occurs in ochrous precipitates, and gibbsite in white precipitates.     

复杂环境下浅埋大跨地铁渡线隧道施工地层沉降控制方法研究

以北京地铁4号线白石桥至学院南路区间渡线隧道作为工程背景,阐述在复杂环境下浅埋大跨隧道施工的地层沉降控制方法。该隧道具有"隧道跨度大(最大跨度22.1 m),埋深浅,断面类型多、结构复杂"等特点,隧道上方有雨水管等市政管线,地层沉降控制难度极大。首先介绍了渡线隧道总体施工顺序安排、超前加固方案和各断面施工方法,并利用FLAC3D三维数值模拟程序,对最大断面开挖支护过程进行了模拟计算,研究了地表沉降规律和塑性区分布情况,用于指导施工。在施工期间对地表沉降进行监测,其结果表明:渡线隧道施工方法是合理的,地表沉降在控制范围内,确保了隧道周边环境的安全。     

Simulation analysis of environmental risk accident and management of high-sulfur gas field development in complex terrain

Environmental risk of high sulfur gas field exploitation has become one of the hot spots of environmental management studies. Severe gas H₂S blowout accidents in recent years have shown that poor understanding and estimates of the poisonous gas movement could lead to dangerous evacuation delays. It is important to evaluate the real concentration of H₂S, especially in complex terrain. Traditional experiential models are not valid in the case of rough terrain, especially in low-lying areas where the gas accumulates. This study, using high sulfur content gas field of Sichuan “Pu Guang gas field” as study object and adopting objective diagnosis of wind field of land following coordinate three dimensions, applied Lagrangian Puff Model and breaking up technique of puffs to simulate the H₂S diffusion condition of blowout accidents produced in the high sulfur content gas field of complex terrain area. The results showed that the H₂S distribution did not occur mainly in low wind direction, and due to the obstruction of the mountain’s body, it accumulated in front of mountain on produced turn over, flowed around submitted jumping type distribution. The mountain waist near the hilltop and low hollow river valley site rapture points simulating contrast showed that the higher the rapture point, the better the diffusing condition of pollutant, the distribution of risk sensitive point decided piping rupture environmental risk size combining the H₂S diffusion result and residential area dispersing in the study area, synthetic judge located in the high rapture point environmental risk was smaller than the low hollow point, thus it was suggested to carryout laying of lining build of equal high line of higher terrain. According to simulation results, the environmental risk management measures aimed at putting down adverse effects were worked out.     

电力系统的污闪问题及防护

重点介绍了有关防污闪机理,深入研究并探讨了四种防污闪的常用技术和方法,分析了绝缘子从积污、湿润到闪络的详细过程,并通过附盐密度法绘制了盐密与闪络电压的关系,为防污闪工作提供理论指导。     

A new report of mesomelic camptomelia,polydactyly and Dandy–Walker complex in siblings

Two male siblings with several malformations are reported. The anomalies detected in both fetuses were mesomelic camptomelia, postaxial hexadactyly and Dandy–Walker complex. There was only one similar previous report in the literature. This combination could represent a specific pattern of malformation or a new syndrome, with different variants. The parents' consanguinity and the recurrence in a subsequent pregnancy suggest an autosomal recessive inheritance pattern. Copyright © 2003 John Wiley & Sons, Ltd.     

拉深件产生破裂、皱折原因及消除方法

如何消除制件在拉深过程中出现的破裂、皱折是生产中经常遇到的难题。因为造成拉深件破裂、皱折的原因是复杂多样的,而且解决问题的根本方法正是目前研究的焦点。为满足实际需要根据拉深件上常出现的破裂和皱折的形式,分析产生的原因及消除的方法。     

纳米TiO2-Al2O3负载CuMnOx对甲苯的催化燃烧

研究采用改进的溶胶-凝胶法制备了TiO2-Al2O3复合载体,并用浸渍法制备CuMnOX/TiO2-Al2O3催化剂,通过对甲苯废气催化燃烧的实验,分别考察了Cu-Mn负载量、Cu/Mn摩尔比、焙烧温度及载体对催化剂制备过程及催化剂活性的影响。实验结果表明:活性组分负载量25%,铜锰活性组分的配比Cu:Mn=1:2,焙烧温度500℃是浸渍法制备CuMnOX/TiO2-Al2O3催化剂较佳的工艺条件;XRD衍射图谱表明,500℃下铜锰尖晶石的存在是催化剂催化活性优良的主要原因;由复合载体制备的CuMnOX/TiO2-Al2O3催化剂比单一载体制备的CuMnOX/Al2O3催化剂具有更高的甲苯转化率,其T99比单一载体要低20℃以上。     

边坡爆破高度对边坡稳定性的影响

为了解爆破后由急倾斜且具有水平裂隙发育岩体组成的边坡稳定性及其内部破坏规律,最终总结出爆破高度对边坡稳定性的影响特征,使用基于颗粒流理论的PFC3D进行该工况模拟。利用PFC3D中的JSET和Bonds模拟非连续和连续性的岩体构造形式,以对实际的岩体中岩块和裂隙发育进行模拟。针对存在该类型构造发育边坡的实际工况,设置了13个爆破点的6个爆破方案进行模拟。研究了模拟结果表现出的边坡内部裂隙和位移随爆破高度的变化规律。其表明了对于同时起爆各爆破点而言,爆破高度越高爆破后边坡越稳定的结论,并分析了出现该现象的原因。说明了结论的普适性,同时该边坡实际的爆破情况也支持了该结论。     

十六烷基三甲基季铵盐-乙硫醇铵盐复合改性膨润土吸附性能研究

用十六烷基三甲基季铵盐(HDTMA)和乙硫醇铵盐(AET)双阳离子同时复合改性内蒙钙基膨润土(NMB),制得新型吸附材料HDTMA-AET-NMB.利用X射线衍射(XRD)、热分析(TG-DTA)、红外光谱(FT-IR)及N2-BET等测定发现,复合改性膨润土的表面性质和层间结构已发生显著改变.对重金属离子Cd2+和对硝基苯酚(PNP)的吸附研究表明,HDTMA-AET-NMB能协同吸附混合水溶液中的目标污染物,对水中重金属离子的吸附机理是膨润土层间的AET与被吸附的Cd2+形成了稳定的配合物;对水中对硝基苯酚的吸附源于其在长碳链疏水介质中的分配.复合改性膨润土可望应用于重金属-有机物混合废水的处理.     

Preparation of rare-earth metal complex oxide catalysts for catalytic wet air oxidation

Catalytic wet air oxidation (CWAO) is one of the most promising technologies for pollution abatement. Developing catalysts with high activity and stability is crucial for the application of the CWAO process. The Mn/Ce complex oxide catalysts for CWAO of high concentration phenol-containing wastewater were prepared by coprecipitation. The catalyst preparation conditions were optimized by using an orthogonal layout method and single-factor experimental analysis. The Mn/Ce serial catalysts were characterized by Brunauer-Emmett-Teller (BET) analysis and the metal cation leaching was measured by inductively coupled plasma torch-atomic emission spectrometry (ICP-AES). The results show that the catalysts have high catalytic activities even at a low temperature (80°C) and low oxygen partial pressure (0.5 MPa) in a batch reactor. The metallic ion leaching is comparatively low (Mn<6.577 mg/L and Ce<0.6910 mg/L, respectively) in the CWAO process. The phenol, COD_Cr, and TOC removal efficiencies in the solution exceed 98.5% using the optimal catalyst (named CSP). The new catalyst would have a promising application in CWAO treatment of high concentration organic wastewater. Translated from Techniques and Equipment for Environmental Pollution Control, 2005, 6(2): 40–44 [译自: 环境污染治理技术与设备]