矿山酸性废水中和渣制备建筑砌块

为了实现矿山酸性废水中和渣资源化,采用硅酸盐水泥(32.5R和42.5R)、铝酸盐水泥3种胶凝材料固化中和渣制备建筑砌块。在抗压强度和浸出毒性测定的基础上,通过X-射线衍射分析、热重分析等实验手段,探究了水泥矿物水化及其与中和渣中主要物质作用机理。研究结果表明,当m(水泥)∶m(干污泥)∶m(水)=1∶0.5∶0.75时,3种胶凝材料制备免烧砖的抗压强度均达到25 MPa以上,明显高于普通黏土烧结砖。     

碳质材料和溶解性有机质对沉积物中全氟化合物在摇蚊幼虫体内富集的影响

全氟化合物(PFASs)是一类具有疏水基团和亲水基团的新型污染物.目前,在环境条件对PFASs生物富集影响方面已开展了诸多研究,但有关碳质材料(CMs)和溶解性有机质(DOM)共存对PFASs在生物体内富集的影响还未见报道。为探讨这一问题,研究了沉积物-水体系中2种碳质材料木炭(W400)、多壁碳纳米管(MWCNT10)和4种DOM(丹宁酸、富里酸、蛋白胨和腐殖酸)对6种典型PFASs在摇蚊幼虫体内生物富集的影响。结果表明,暴露10 d后(已达到富集平衡状态),无论体系中是否存在CMs,添加1~50 mg C·L-1不同类型的DOM对PFASs在摇蚊幼虫体内生物富集的影响不显著。无论体系中是否存在DOM,添加CMs均能降低摇蚊幼虫体内PFASs的含量,且MWCNT10对PFASs生物富集的降低比例显著高于W400。与对照相比,添加0.4%的MWCNT10对摇蚊幼虫体内PFASs含量的降低比例为21%~56%,而同等添加量的W400对其降低比例均低于20%。这表明,在沉积物-水体系中,当CMs和DOM共存时,CMs是影响PFASs在摇蚊幼虫体内富集的主要因素,而少量DOM的引入对其影响不大。     

Copolyester-coated mineral fertilizers – preparation,characterization, and nutrient release

Two different copolyesters, aliphatic poly(butylene succinate-co-dilinoleate) and aliphatic-aromatic poly(ethylene succinate-co-terephthalate), were used in the preparation of controlled-release fertilizers (CRFs). The properties of the resulting polymer-coated materials were examined via scanning electron microscopy and strength testing machinery, whereas nutrient release was measured in water and soil with the use of photometric method. Both polymer-coated materials meet the criteria of CRFs when their polymer content is higher than 18 wt %. Differences in the results of the experiments performed in soil and water were explained by the discrepancies in the structure and composition of both copolymers and their degradation tendencies. Both polymer-coated materials were proven to be more resistant toward crushing strength than the initial fertilizer. For interpretation of the experimental kinetic data, a sigmoidal equation was successfully applied.     

Determination of traces of fluorine,chlorine, bromine,cadmium and lead in plastic materials

This paper describes the quantitative determination of F, Cl, Br, Cd and Pb in plastic materials. The concentration of the elements Cl, Br, Cd and Pb is first semiquantitatively measured by X‐ray fluorescence spectrometry (XRF) directly in the solid sample with a detection limit of approximately 10 μg/g. Afterwards, F and any of the other elements which exceed the limit values for materials which are disposable without special precautions are measured after the digestion of the material. The samples are digested either under pressure in an oxygen atmosphere for F, Cl and Br or under pressure with nitric acid for Cd and Pb. The digestion converts the halides to the anions which are measured potentiometrically (F^‐, Br^‐) or with ion chromatography (Cl^‐). Cd and Pb are measured by graphite furnace atomic absorption spectrometry (GF‐AAS). The determination limits achieved are 20 μg/g for F and Br, 250 μg/g for Cl, 0.01 μg/g for Cd and 0.2 μg/g for Pb, all below the limit values set by current regulations in Switzerland.     

Pulmonary inflammation induced by office dust and the relation to 1 → 3-β-glucan using different extraction techniques

It is observed that 1?→?3-β-glucan, a major cell wall component of fungi, induces pulmonary inflammation. There is inconsistency in determining the correlation between the levels of glucan measured by current extraction methods and the respiratory inflammation observed in individuals or lab animals exposed to environmental dust samples. The glucan-specific limulus amebocyte lysate (G-LAL) method was used after extraction with dimethyl sulfoxide (DMSO) or sodium hydroxide (NaOH) to analyze the glucan content of office dust samples collected from a water-damaged building. C3HeB/FeJ mice, an endotoxin-sensitive strain, were treated with different dust samples (2.5?mg?kg^?1 body weight) or saline (vehicle control) by pharyngeal aspiration. At 1?day after aspiration, bronchoalveolar lavage (BAL) was performed, and lung inflammation and injury were assessed by measuring: (1) neutrophil (PMN) infiltration, (2) inflammatory cytokine (IL-6, IL-10, MCP-1, IFN-γ, TNF-α, and IL12-p70) levels, and (3) albumin and lactate dehydrogenase in recovered BAL fluid. Both DMSO and NaOH extraction increased the detection of glucan by approximately 20-fold compared to water extraction. However, only the DMSO extraction method showed a statistically significant positive correlation between 1?→?3-β-glucan and albumin levels, total numbers of BAL, polymorphonuclear leukocytes (PMNs) cells recovered, levels of TNF-α, MCP-1, and IL-6. In conclusion, 1?→?3-β-glucan is a potent inflammatory agent in dust samples and DMSO extraction for glucan analysis may prove useful in understanding the impact of environmental contamination by glucans on lung disease.     

Accounting for Cadmium: Tracking Emissions of Cadmium From the Global Economy

This paper examines the flow of cadmium through the global economy, with the aim of quantifying emissions of cadmium into the environment as a result of anthropogenic activities. First, a materials balance methodology is presented as the most appropriate means of assessing cadmium emissions from a wide range of anthropogenic sources. This is then applied to the best available data, from a variety of sources, to arrive at estimated flows of cadmium. Results are presented for 10 geo-political world regions and for a range of economic activities including non-ferrous metals production, iron and steel production, combustion of fossil fuels, fertilizer manufacture and use, cement production and the manufacture, use and disposal of cadmium containing products. Initially, this analysis partitions the total flow of cadmium into three major categories: atmospheric emissions, water-borne effluents and solid or bulked waste arisings. the paper then suggests a probable further partition of the initial emissions into different environmental media.     

菜籽油直接胺解法制备咪唑啉衍生物的缓蚀性能研究

为了降低原料成本,减少三废污染,以菜籽油和羟乙基乙二胺为原料,采用潜溶剂法合成咪唑啉中间体IM-1,再分别与氯化苄和氨基磺酸进行改性,得到阳离子咪唑啉衍生物IM-2和两性咪唑啉衍生物IM-3。应用红外光谱和核磁共振氢谱对合成产物进行鉴定。从中优选出1种与助剂KI(20∶1)复配,得到复配缓蚀体系IM-4。利用挂片法评价了该复配体系IM-4的缓蚀性能,并探究了其在A3钢表面的成膜性能。利用扫描电镜观察了加入IM-4前后A3钢的表面形貌,并与常用缓蚀剂进行了缓蚀性能的比较。结果表明,该缓蚀体系IM-4在盐酸溶液中对A3钢具有较强的缓蚀性能,静态缓蚀率为88.62%~98.98%,动态缓蚀率为86.76%~95.85%。     

区域危险品道路运输网络双层反馈规划模型及算法

为通过运输网络规划方式降低区域路网危险品运输风险,根据危险品道路运输网络规划中存在监管者路网规划和运输者路线选择的双层约束特征,在假设监管者网络规划目的为总运输风险最小,运输者选线目的为总运输成本最小的基础上,建立区域危险品道路运输网络双层规划模型。进一步提出能求解得到稳定运输网络的双层反馈式算法,即在传统模型算法中增加稳定性检验和反馈调整算法,进而保证运输者在监管者规划路网中所选路线运输成本最小的同时运输风险也尽可能小。最后,通过实例分析检验模型和算法的有效性。计算结果显示,反馈式算法求得的运输网络更稳定,总运输风险值也比传统模式和算法的低。     

网状铝合金抑爆材料抑爆性能研究

为评价网状铝合金材料的阻隔防爆性能,基于多孔材料的阻隔防爆机理,采用抑爆材料抑爆性能测试装置和可燃气体爆炸箱及高速摄像机,研究材料在不同填充密度、不同留空率下对液化石油气的燃爆压力的影响,及液化石油气火焰在填充材料的爆炸箱中的传播过程。试验结果表明:填充密度为35 kg/m3、留空率为5%时,材料抑爆性能最好;当抑爆材料在容器内的填充密度一定时,其燃爆压力随留空率增加而增加;与未填充材料相比,填充材料后火焰衰减;此外,得到填充密度、留空率和燃爆压力间的数学拟合公式。降低留空率、增加填充密度能够更好地提高阻隔防爆性能。     

防刺防弹复合材料的技术状况探讨

本文论述了防弹防刺复合材料的国内外发展状况、目前国内外所普遍采用的防刺防弹材料状况、防弹防刺复合材料所采用的材料状况、防弹防刺复合材料工艺状况、防弹防刺复合材料结构状况、防弹防刺复合材料的测试技术状况、防弹防刺复合材料的性能状况。