不同类型活性炭处理废水中重金属离子的研究进展

重金属对人体的显著毒性和难降解的特性,使重金属水体污染成为全球性关注的环境问题。本文综述了重金属废水的危害、来源及常用处理方法,比较了不同类型活性炭处理废水中重金属离子的差异,阐述了不同类型活性炭处理技术的优势和特点,并对今后的重金属废水处理技术研究方向进行了展望。     

环境监测中重金属污染的控制对策分析

在我国社会经济快速发展的过程中,人们对自然资源需求无度,造成生态环境破坏问题非常严重。通过环境监测可以及时分析空气中有毒有害的物质成分,并且对环境污染问题进行及时有效的解决。但是在监测的过程中所采用大量的空气试剂很容易造成环境二次污染等问题,为此必须要积极加强对环境监测中重金属污染的合理控制,对空气试剂产生的大量废弃物进行及时的回收处理,从而有效避免出现二次污染的情况,充分发挥环境监测的作用。     

农田重金属污染修复新技术展望与探索

目前,土壤重金属污染已成为全球各国共同面临的棘手问题。土壤重金属污染具有隐蔽性、滞后性、积累性、持久性等特点,已严重危害到人类的健康。本文在全面了解国内外重金属污染土壤修复研究动态的基础上,对纳米多孔磁性螯合材料用于农田重金属污染土壤修复的新技术进行展望与探索研究,为国内这一领域的工作开展提供借鉴参考。     

蚯蚓-稻壳炭联合堆肥对工业污泥中重金属的影响研究

蚯蚓堆肥相关研究多集中在生活污泥方面,对工业污泥的探索较少。该研究以马鞍山某钢铁污水处理站污泥为例,添加不同比例稻壳炭(2%、4%、8%),设置污泥单独堆肥、稻壳炭与污泥堆肥以及蚯蚓-稻壳炭联合污泥堆肥试验,探索蚯蚓与稻壳炭联合堆肥对工业污泥中重金属形态和生物有效性的影响。研究表明,(1)相比污泥单独堆肥,稻壳炭联合污泥堆肥能增加污泥pH、EC、TP和降低TOC、TN,而蚯蚓联合稻壳炭堆肥污泥可增加TN,并进一步增加污泥EC、TP,显著降低污泥的pH、TOC。(2)稻壳炭堆肥中重金属Zn、Cu、Pb、Cd含量因浓缩效应而上升;而蚯蚓联合稻壳炭堆肥,重金属含量显著下降,添加4%稻壳炭时,重金属Zn、Cu、Pb、Cd质量分数达到最小值,分别为856.64、137.10、158.92、15.48mg·kg-1。(3)重金属形态分析表明,随着稻壳炭比例增加,稻壳炭堆肥中重金属Zn、Cu、Pb、Cd的交换态和碳酸盐结合态转化为残渣态及铁锰氧化态的比例增大,添加8%稻壳炭时DTPA提取的有效态重金属质量分数最低,分别为705.72、47.95、50.43、4.47 mg·kg-1;蚯蚓-稻壳炭联合堆肥会使得污泥中重金属交换态、碳酸盐结合态、铁锰结合态和有机结合态均向残渣态转化,添加4%稻壳炭与蚯蚓的协同转化能力最大,Zn、Cu、Pb、Cd有效态重金属质量分数分别为629.84、38.63、36.76、1.63mg·kg-1,说明稻壳炭添加入蚯蚓堆肥可进一步降低工业污泥中重金属有效性,使重金属钝化。本研究可为稻壳炭联合蚯蚓堆肥处理工业污泥提供参考和科学依据。     

Magnetotactic bacteria: Characteristics and environmental applications

• Magnetotactic bacteria (MTB) synthesize magnetic nanoparticle within magnetosomes. • The morphologic and phylogenetic diversity of MTB were summarized. • Isolation and mass cultivation of MTB deserve extensive research for applications. • MTB can remove heavy metals, radionuclides, and organic pollutants from wastewater. Magnetotactic bacteria (MTB) are a group of Gram-negative prokaryotes that respond to the geomagnetic field. This unique property is attributed to the intracellular magnetosomes, which contains membrane-bound nanocrystals of magnetic iron minerals. This review summarizes the most recent advances in MTB, magnetosomes, and their potential applications especially the environmental pollutant control or remediation. The morphologic and phylogenetic diversity of MTB were first introduced, followed by a critical review of isolation and cultivation methods. Past research has devoted to optimize the factors, such as oxygen, carbon source, nitrogen source, nutrient broth, iron source, and mineral elements for the growth of MTB. Besides the applications of MTB in modern biological and medical fields, little attention was made on the environmental applications of MTB for wastewater treatment, which has been summarized in this review. For example, applications of MTB as adsorbents have resulted in a novel magnetic separation technology for removal of heavy metals or organic pollutants in wastewater. In addition, we summarized the current advance on pathogen removal and detection of endocrine disruptor which can inspire new insights toward sustainable engineering and practices. Finally, the new perspectives and possible directions for future studies are recommended, such as isolation of MTB, genetic modification of MTB for mass production and new environmental applications. The ultimate objective of this review is to promote the applications of MTB and magnetosomes in the environmental fields.     

Utilization of MSWI fly ash as partial cement or sand substitute with focus on cementing efficiency and health risk assessment

• Washed MSWI fly ash was used as partial cement or sand substitute. • Sand replacing is beneficial for strength, while cement replacement reduces strength. • Cementing efficiency factor and mortar pore structure explain the strength results. • Health risk assessment was conducted for MSWI fly ash blended cement mortar. • CR and HI contributed by different exposures and heavy metals were analyzed. The strength of cement substituted mortar decreases with the increase in fly ash amount, whereas the strength increases when the fly ash is blended as sand substitute. A mortar with highest strength (compressive strength= 30.2 Mpa; flexural strength= 7.0 Mpa) was obtained when the sand replacement ratio was 0.75%. The k value (cementing efficiency) of fly ash varied between 0.36 and 0.15 for the fly ash fraction in binder between 5% and 25%. The k values of fly ash used for sand replacement were all significantly above that used for cement substitution. The macropores assigned to the gaps between particles decreased when the fly ash was used as sand replacement, providing an explanation for the strength enhancement. The waste-extraction procedure (toxicity-sulphuric acid and nitric acid method (HJ/T 299-2007)) was used to evaluate metal leaching, indicating the reuse possibility of fly ash blended mortar. For the mortar with the mass ratio of fly ash to binder of 0.5%, the carcinogenic risks (CR) and non-carcinogenic hazard quotient (HQ) in sensitive scenario for blended mortar utilization were 9.66 × 10^-7 and 0.06, respectively; these results were both lower than the threshold values, showing an acceptable health risk. The CR (9.89 × 10^-5) and HQ (3.89) of the non-sensitive scenario for fly ash treatment exceeded the acceptable threshold values, indicating health risks to onsite workers. The main contributor to the carcinogenic and non-carcinogenic risk is Cr and Cd, respectively. The CR and HQ from inhalation was the main route of heavy metal exposure.     

我国高速公路周边土壤重金属污染现状及研究进展

以我国高速公路周边土壤重金属为研究对象,综述了我国高速公路周边土壤重金属污染特征、影响因素、来源、环境风险及其研究进展。高速公路周边土壤主要受Pb、Cd、Cr、Cu、Zn等重金属污染,主要呈现指数分布、偏态分布和两者混合分布等特点,并且受到土地利用、风向、地形、车流量等多种因素的综合影响。土壤重金属的来源除了受成土母质等自然因素影响以外,公路交通和周边工农业活动也会对其来源产生较大影响。传统的土壤重金属评价方法主要采用单因子指数法、地累积指数法、生态风险评价法等对重金属的污染等级和环境风险进行评价。未来的研究应将重金属形态分析、空间和地统计分析、重金属稳定同位素示踪和源解析模型以及预测模型等多种手段相结合,开展高速公路周边土壤重金属的污染特征、时空分布、来源及预测预警研究等,为我国高速公路沿线工农业生产布局及其土壤重金属污染防控提供科学依据和决策支撑。     

土壤中7种重金属和砷测定的精密度控制指标研究

通过对浙江省近700组实际土壤样品进行分析,研究了土壤中铜、铅、锌、铬、镍、镉、砷、汞7种重金属和砷测定的精密度控制指标(实验室内相对偏差和实验室间相对偏差),并与行业标准分析方法和文献进行了比较,旨在为环境监测质量控制与质量保证工作提供参考。经统计分析,建议实验室内相对偏差控制指标如下:铜,≤15%;铅,≤15%;锌,≤15%;铬,≤15%;镍,≤15%;镉,≤20%;砷,≤15%;汞,≤50%。建议实验室间相对偏差控制指标如下:铜,≤25%;铅,≤25%;锌,≤20%;铬,≤20%;镍,≤25%;镉,≤35%;砷,≤25%;汞,≤55%。     

Spatial Characterization and Prioritization of Heavy Metal Contaminated Soil-Water Resources in Peri-Urban Areas of National Capital Territory (NCT), Delhi

Due to rapid industrialization and urbanization during last two decades, contamination of soils by heavy metals is on an increase globally. Lands under peri-urban agriculture are the worst affected. In NCT, Delhi about 14.4% of land area is chemically degraded. In order to take care of this problem, recently the Supreme Court of India ordered to shift various non-confirming (about 39,000 units) industries to regions outside NCT, Delhi. However in spite of this, there have been several reports and parliamentary debates on the phyto-toxicity and extensive accumulation of heavy metals in the region. Literature review revealed that the basis of these debates is a few studies on some point locations in/around Delhi. It was further observed that information on the distribution and extent of heavy metal pollution problem in the region was completely missing. The present study was thus basically aimed at assessing the spatial distribution/extent and type of heavy metal pollution in the study area, for enabling future designing of appropriate site-specific management measures by the decision makers.For this, detailed spatial information on bio-available heavy metal concentrations in the soils and surface/sub-surface waters of NCT (Delhi) was generated through actual soil/water surveys, standard laboratory methods and GIS techniques. The study showed that concentration of all micronutrients (viz. Zn: 0.05–0.18 ppm; Cu: in traces; Fe: 0–0.5 ppm; and Mn: 0–1.2 ppm) and most heavy metals (viz. Ni: 0–0.7 ppm; Pb: 0–0.15 ppm and Cd: in traces) in the surface/sub-surface irrigation waters were well within permissible limits. However Cr concentrations in irrigation waters of Alipur and Shahdara blocks were far above their maximum permissible limit of 1 ppm. It was further observed that Ni and Cr concentrations in the drinking waters of almost entire test area were far above maximum permissible levels of 0.02 and 0.01 ppm, respectively. Bio-available concentrations of several heavy metals (viz. Pb: 0.1–2 ppm; Cd: traces; Ni: 0.05–2 ppm and Cr: 0–0.4 ppm) in the study area soils were also observed to be well within the maximum permissible limits. However there were point Cu contaminations (5–10 ppm) in the sewage-sludge amended soils of vegetable growing areas near south Shahdara block. This was attributed to increased Cu availability due to oxidized acidic conditions generated by over-irrigation of agricultural lands. Available Mn concentrations in Kanjhawala, western Najafgarh and Alipur soils were also observed to be above maximum permissible limit of 10 ppm. This was observed to be mainly due to the geology (i.e. presence of Mn rich sedimentary rocks) and prevalence of reduced acidic conditions, due to paddy cultivation, in these areas. It was further observed that there is acute zinc (Zn) deficiency (< 0.6 ppm) in paddy growing soils of north Kanjhawala, Alipur and some parts of Najafgarh and Shahdara blocks due to extensive leaching of available Zn fractions to lower soil horizons. Similar available Zn deficiencies in high pH (8.5) soils of areas around Bamnoli village in E-Najafgarh block were also observed.     

大型铜尾矿库区节节草(Hippochaete ramosissimum)根际土壤重金属形态分布与影响因素研究

通过野外调查和实验分析,对安徽省铜陵市铜官山铜尾矿库、狮子山铜尾矿库及狮子山铜尾矿库周边农田3处生长的节节草根际与非根际土壤中重金属(Cu、Cd、Pb、Zn)的形态、含量和分布进行了研究.结果表明,节节草根际与非根际土壤重金属的主要形态分布基本一致,均表现为矿物态含量占据了重金属全量的大部分,而交换态含量偏低.与非根际土壤相比较,根际土壤中交换态、有机态重金属所占比例显著增加,其中Cu的有机结合态所占比例增加了53 25%、Cd、Pb的有机结合态所占比例增加超过17%,Zn则增加了5.67%;与此同时,碳酸盐结合态和铁锰氧化物结合态含量有所下降.统计分析表明,Cu、Cd、Pb、Zn在根际土壤中的形态分布与土壤pH值、有机质含量、植物生长等因素密切相关.