Factors Affecting Stream Nutrient Loads: A Synthesis of Regional SPARROW Model Results for the Continental United States1

Preston, Stephen D., Richard B. Alexander, Gregory E. Schwarz, and Charles G. Crawford, 2011. Factors Affecting Stream Nutrient Loads: A Synthesis of Regional SPARROW Model Results for the Continental United States. Journal of the American Water Resources Association (JAWRA) 47(5):891‐915. DOI: 10.1111/j.1752‐1688.2011.00577.x Abstract: We compared the results of 12 recently calibrated regional SPARROW (SPAtially Referenced Regressions On Watershed attributes) models covering most of the continental United States to evaluate the consistency and regional differences in factors affecting stream nutrient loads. The models – 6 for total nitrogen and 6 for total phosphorus – all provide similar levels of prediction accuracy, but those for major river basins in the eastern half of the country were somewhat more accurate. The models simulate long‐term mean annual stream nutrient loads as a function of a wide range of known sources and climatic (precipitation, temperature), landscape (e.g., soils, geology), and aquatic factors affecting nutrient fate and transport. The results confirm the dominant effects of urban and agricultural sources on stream nutrient loads nationally and regionally, but reveal considerable spatial variability in the specific types of sources that control water quality. These include regional differences in the relative importance of different types of urban (municipal and industrial point vs. diffuse urban runoff) and agriculture (crop cultivation vs. animal waste) sources, as well as the effects of atmospheric deposition, mining, and background (e.g., soil phosphorus) sources on stream nutrients. Overall, we found that the SPARROW model results provide a consistent set of information for identifying the major sources and environmental factors affecting nutrient fate and transport in United States watersheds at regional and subregional scales.     

Local calibration of coliforms parameters of water quality problem at Igapó I Lake, Londrina, Paraná, Brazil

This article presents results concerning the local calibration of the transport parameters (longitudinal and transversal diffusions and decay coefficient) for a two-dimensional problem of water quality at Igapó I Lake, located in Londrina, Paraná, Brazil, using fecal coliforms as an indicator of water quality. The simulation of fecal coliforms concentrations all over the water body is conducted by means of a structured discretization of the geometry of Igapó I Lake, together with the finite difference and finite element methods. By using the velocity field, modeled by the Navier-Stokes and Poisson equations, the flow of fecal coliforms is described by means of a transport model, which considers advective and diffusive processes, as well as a process of fecal coliforms decay. In the checkpoint, the longitudinal and transversal diffusion coefficients and the coliforms decay coefficient that best fitted the value of the fecal coliforms concentration were D_x = D_y = 0.001 m²/h and k = 0.5 d⁻¹ = 0.02083 h⁻¹. A qualitative and quantitative analysis of the numerical simulations conducted in function of the diffusion coefficients and of the coliforms decay parameter provided a better understanding of the local water quality at Igapó I Lake.     

Inverse calculation approaches for source determination in hazardous chemical releases

Source determination is vital in decision making and emergency planning involving hazardous chemical releases. This work was concentrated on inverse calculation approaches for source determination as well as current trends and future perspectives. In this paper, these different approaches are reviewed by dividing them into two categories: probability modeling methods and optimization modeling methods. The traits of these approaches are comparatively analyzed. Then it is shown how these approaches behave when applied to practical cases, and their feasibility, applicability, stability, and limitation in determining the location and strength are presented. It is argued that when experimenting with potential terrorist attacks involving hazardous chemical releases, observation points should be around the main line of the downwind direction when the source is known; while the uniform distribution of observation points is an efficient solution for unknown incidents. Probability modeling methods are demonstrated to be insufficient during emergency responses due to their lacking of enough prior information of unknown parameters, while optimization modeling methods are efficient and become a new trend in source determination. Findings reflect an urgent need for the development of high-accuracy detectors and further research of data transmission techniques in order to ensure the validity of these approaches.     

中国生活源固体垃圾产生和处理及其N2O排放

核算和评估固体垃圾产生和处理及其N₂O排放具有重要的现实和指导意义.本研究以中国为例（2008—2017年）,建立了固体垃圾产生、处理和N₂O排放核算框架.结果表明,10年间中国固体垃圾产生量上升了34.6%,年均6.13亿t,生活垃圾（48.6%）和工业日用品垃圾（24.6%）是主要贡献源;处理格局仍以填埋为主（占53.0%）,焚烧为辅（25.5%）;堆弃（42.5%）和焚烧（31.2%）是固体垃圾处理中N₂O气体的主要排放源,堆肥占21.9%,填埋处理排放最少（4.4%）;固体垃圾处理产生的渗滤液逐年增加,渗滤液排放的N₂O占固体垃圾处理N₂O排放总量的41.7%,生活垃圾产生的渗滤液是其主要排放源.加大垃圾分类处理和资源化利用力度,加强农村生活垃圾处理处置能力、减少垃圾堆弃量及提高垃圾处理技术对固体垃圾的产生及其N₂O排放减排至关重要.     

有证标准样品的应用及其管理方法探讨

介绍了有证标准样品的定义和主要作用,详细阐述了有证标准样品在检测实验室的7个主要应用领域、正确使用指南和科学管理方法,以保证检测实验室检测结果的准确和量值溯源性。     

焦化废水处理技术的发展

焦化废水主要来自焦化厂和煤气厂，污染物组成复杂，含有挥发酚、许多难以生物降解的芳香族有机物、多环化合物和氧硫氮等杂环化合物，属较难生化降解的高浓度有机工业废水。因此焦化废水的处理难度大，已引起国内外人士的关注，一直是国内外废水处理领域的一大难题。文章阐述了焦化废水的处理技术发展及其近年来发展的新技术。     

建立我国战略环境评价理论与方法体系

战略环境评价是环境影响评价在战略层次上的应用，是具体落实可持续发展战略的重要工具。在分析其现实意义的基础上，提出我国战略环境评价理论与方法体系的主要研究内容，就建立我国战略环境评价理论与方法提出建议。     

Carbon sequestration in soils of SW-Germany as affected by agricultural management—Calibration of the EPIC model for regional simulations

Global emissions trading allows for agricultural measures to be accounted for the carbon sequestration in soils. The Environmental Policy Integrated Climate (EPIC) model was tested for central European site conditions by means of agricultural extensification scenarios. Results of soil and management analyses of different management systems (cultivation with mouldboard plough, reduced tillage, and grassland/fallow establishment) on 13 representative sites in the German State Baden-Württemberg were used to calibrate the EPIC model. Calibration results were compared to those of the Intergovernmental Panel on Climate Change (IPCC) prognosis tool. The first calibration step included adjustments in (a) N depositions, (b) N₂-fixation by bacteria during fallow, and (c) nutrient content of organic fertilisers according to regional values. The mixing efficiency of implements used for reduced tillage and four crop parameters were adapted to site conditions as a second step of the iterative calibration process, which should optimise the agreement between measured and simulated humus changes. Thus, general rules were obtained for the calibration of EPIC for different criteria and regions. EPIC simulated an average increase of +0.341 Mg humus-C ha⁻¹ a⁻¹ for on average 11.3 years of reduced tillage compared to land cultivated with mouldboard plough during the same time scale. Field measurements revealed an average increase of +0.343 Mg C ha⁻¹ a⁻¹ and the IPCC prognosis tool +0.345 Mg C ha⁻¹ a⁻¹. EPIC simulated an average increase of +1.253 Mg C ha⁻¹ a⁻¹ for on average 10.6 years of grassland/fallow establishment compared to an average increase of +1.342 Mg humus-C ha⁻¹ a⁻¹ measured by field measurements and +1.254 Mg C ha⁻¹ a⁻¹ according to the IPCC prognosis tool. The comparison of simulated and measured humus C stocks was r² ≥ 0.825 for all treatments. However, on some sites deviations between simulated and measured results were considerable. The result for the simulation of yields was similar. In 49% of the cases the simulated yields differed from the surveyed ones by more than 20%. Some explanations could be found by qualitative cause analyses. Yet, for quantitative analyses the available information from farmers was not sufficient. Altogether EPIC is able to represent the expected changes by reduced tillage or grassland/fallow establishment acceptably under central European site conditions of south-western Germany.     

Using single- and multi-target regression trees and ensembles to model a compound index of vegetation condition

An important consideration in conservation and biodiversity planning is an appreciation of the condition or integrity of ecosystems. In this study, we have applied various machine learning methods to the problem of predicting the condition or quality of the remnant indigenous vegetation across an extensive area of south-eastern Australia—the state of Victoria. The field data were obtained using the ‘habitat hectares’ approach. This rapid assessment technique produces multiple scores that describe the condition of various attributes of the vegetation at a given site. Multiple sites were assessed and subsequently circumscribed with GIS and remote-sensed data.     

Recruitment and attrition of associated plants under a shading crop canopy: Model selection and calibration

Associated plant and animal diversity provides ecosystem services within crop production systems. The importance of the maintenance or restoration of diversity is therefore increasingly acknowledged. Here we study the population dynamics of associated annual plants (‘weeds’) during the growth of a crop in a season and introduce a minimal model to characterize the recruitment and attrition of the associated plants under the influence of shading by the crop. A mechanistically based, logistic, light interception model was parameterized with light interception measurements in two single crops (barley and rye) and in mixtures of these cereals with peas. Population dynamics data were collected for the annuals Papaver rhoeas, Centaurea cyanus, Chrysanthemum segetum, and Misopates orontium. A minimal population dynamics model was identified for each annual plant species, using system identification techniques as model selection and calibration.