上海市能源利用碳排放足迹研究

能源利用是人类生存的基础和前提,对其碳足迹及生态压力进行研究具有重要意义.本文运用碳排放足迹的相关含义及研究方法,计算得出1995-2006年上海市能源利用的总碳足迹、各能源类型和产业类型的碳足迹、碳足迹的产值和生态压力值.并以此为基础,利用岭回归函数进行STIRPAT模型拟合,进一步研究经济发展与碳排放足迹之间的关系,最后提出适应性的管理策略.研究结果表明:①总碳足迹从1995年的1.05 hm~2/人上升到2006年的1.36 hm~2/人,呈现波动上升的趋势;②1995-2006年各能源利用的碳足迹及其分配率均以煤炭最大,石油次之,天然气最小,且煤炭利用的碳足迹分配率逐年下降,石油与天然气与之相反;③2001-2006年第一、二产业的碳足迹变化不明显,而第三产业与产业总碳足迹呈明显上升趋势;④能源利用的碳足迹产值从1995年的1.79万元/hm~2增加至2006年的3.79万元/hm~2,碳足迹的生态压力也从1995年的129.6上升至2006年的231.8;⑤能源利用碳足迹与经济增长关系的模型拟合研究结果中没有出现环境库兹涅茨曲线,进一步证实能源利用对环境所造成的压力增大.     

武汉城市圈制造业集聚的实证研究

采用调整后的产业集聚EG指标,结合产业集中度指数,对武汉城市圈2000～2007年制造业19个行业的集聚程度进行了精确的测度,并分别从制造业集聚度变动趋势、产业集聚度特征、产业集聚空间分布特征、增长集聚弹性等角度进行了详细的分析。结果表明：考察期间武汉城市圈制造业的区域集聚度较高,而且中高技术行业集聚特征十分明显,资源性和低技术行业较为分散;从行业的区域集聚空间分布特征来看,产业集中度较高,主要集中在武汉、黄石、孝感和黄冈4市,其它5个城市产业集中度较低,城市上榜次数较少,且上榜行业主要集中在资源性和低技术行业,形成了以武汉等4市为中心,其它5市为外围的“中心 外围”结构;构建的产业集聚弹性模型计算结果表明,整体上城市圈制造业集聚弹性较大,但不同行业间的弹性值差距明显。     

Phytotoxicity of atrazine and alachlor in soil amended with sludge,manure and activated carbon

Abstract

Greenhouse studies were conducted to determine the influence of waste‐activated carbon (WAC), digested municipal sewage sludge (DMS), and animal manure on herbicidal activity of atrazine [2‐chloro‐4‐(ethylamino)‐6‐(isopropylamino)‐s‐trazine] and alachlor [2‐chloro‐2’,6'‐diethyl‐N‐(methoxymethyl)acetanilide] in a Plainfield sandy soil. Amendments generally reduced bioactivity against oat (Avena sativa L.) and Japanese millet (E. crus‐galli frumentacea). The extent to which herbicide phytotoxicity was inhibited depended upon the application rate and the kind of soil amendment. WAC, applied at the loading rate of 2.1 mt C/ha, showed a significant inhibitory effect on both herbicides. In DMS‐ and manure‐amended soil, the reduction of atrazine activity was not significant at the rate of 8.4 mt C/ha, but reduction of alachlor activity was significant at the rate of 4.2 mt C/ha. Despite inhibition of herbicidal activity, the ED₅₀ of atrazine and alachlor was below 2 ppm in most of the amendment treatments. Before adopting carbon‐rich waste amendments as management practices for controlling pesticide leaching in coarse‐textured soils, further studies are needed to characterize how alterations in sorption, leaching and degradation may affect herbicidal activity.     

EFFECT OF SOIL STERILIZATION BY MERCURIC CHLORIDE ON HERBICIDE SORPTION BY SOIL

Microbial inhibitors such as mercuric chloride are frequently used to sterilize soil or soil–water slurries in experimental studies on the fate of xenobiotics in the environment. This study examined the influence of mercuric chloride additions to soil–water slurries on the sorptive behaviour of a phenoxy herbicide (2,4-D) in soil. The results demonstrated that mercuric chloride strongly decreased the capacity of the soil to retain herbicides, and that the interference of mercuric chloride with herbicide sorption increased with increasing soil organic carbon contents. Because of the competitive sorption between mercuric chloride and the phenoxy herbicide, we conclude that mercuric chloride may not be a good soil sterilization procedure for use in xenobiotic fate studies.     

Toxicological characterization of the landfill leachate prior/after chemical and electrochemical treatment: A study on human and plant cells

In this research, toxicological safety of two newly developed methods for the treatment of landfill leachate from the Piškornica (Croatia) sanitary landfill was investigated. Chemical treatment procedure combined chemical precipitation with CaO followed by coagulation with ferric chloride and final adsorption by clinoptilolite. Electrochemical treatment approach included pretreatment with ozone followed by electrooxidation/electrocoagulation and final polishing by microwave irradiation. Cell viability of untreated/treated landfill leachate was examined using fluorescence microscopy. Cytotoxic effect of the original leachate was obtained for both exposure periods (4 and 24 h) while treated samples showed no cytotoxic effect even after prolonged exposure time. The potential DNA damage of the untreated/treated landfill leachate was evaluated by the comet assay and cytokinesis-block micronucleus (CBMN) assay using either human or plant cells. The original leachate exhibited significantly higher comet assay parameters compared to negative control after 24 h exposure. On the contrary, there was no significant difference between negative control and chemically/electrochemically treated leachate for any of the parameters tested. There was also no significant increase in either CBMN assay parameter compared to the negative control following the exposure of the lymphocytes to the chemically or electrochemically treated landfill leachate for both exposure periods while the original sample showed significantly higher number of micronuclei, nucleoplasmic bridges and nuclear buds for both exposure times. Results suggest that both methods are suitable for the treatment of such complex waste effluent due to high removal efficiency of all measured parameters and toxicological safety of the treated effluent.     

Risk assessment of xenoestrogens in a typical domestic sewage-holding lake in China

Release of domestic sewage leads to accumulation of xenoestrogens in holding waters, especially in closed or semi-enclosed waters such as lakes. In the study, the occurrence, distribution, estrogenic activity and risk of eight xenoestreogens were evaluated in Lake Donghu, China. Nonylphenol (NP), octylphenol (OP), and bisphenol A (BPA) were identified as the main xenoestrogens ranging from tens of ng L⁻¹ (in the surface water) or ng g⁻¹ dw (in the suspended particles and sediment) to tens of μg L⁻¹ or μg g⁻¹ dw. The sum of 17β-estradiol equivalents (∑EEQs) ranged from 0.32 to 45.02 ng L⁻¹ in the surface water, 0.53 to 71.86 ng g⁻¹ dw in the suspended particles, and 0.09 to 24.73 ng g⁻¹ dw in the sediment. Diethylstilbestrol (DES) was determined as the main contributor to ∑EEQs followed by NP. The risk assessment showed a higher risk in the surface water than in the suspended particles and sediment in such domestic sewage-holding lake.     

多孔镁铝复合氧化物对水溶液中Cr（VI）的吸附性能

摘要以镁盐、铝盐、纯碱和烧碱为原料制备了一种多孔镁铝复合氧化物（P—Mg3.1AlO4.6）,其比表面积、平均孔径和总孔容分别为206．3m2／g、8．961nm和0．4208cm3／g。研究了这种多孑L材料对水溶液中cr（VI）的吸附性能,在25～45qC时,静态吸附量为82．32～141．7mg／g;当初始浓度100mg／L、流速5mL／min、床层高度10cm和pH=6时,半穿透时间、半穿透吸附量和饱和吸附量分别为406rain、49．28ing／g和51．30Ing／g;拟合参数及误差分析表明,cr（Ⅵ）在P—M敬。AIO4.6上的静态吸附过程符合Freundlich等温方程式和伪二级动力学方程,Yoon·Nelson模型能很好地预测cr（Ⅵ）在P—Mg3.1A104.6上的动态穿透曲线。     

饮用水源突发性苯胺污染应急处理技术研究

分别从水样浓度、pH、反应时间、药剂投加量以及两者联用时的投加顺序等方面研究了粉末活性炭、高锰酸钾以及两者联合使用时对苯胺的去除效果.结果表明,当污染发生时,高锰酸钾和粉末活性炭联用处理技术是可行的;先投加粉末活性炭再加高锰酸钾处理比先投加高锰酸钾再投加活性炭的去除效果好;当水样pH在中性条件下,粉末活性炭和高锰酸钾联用处理技术的去除效果好;应急处理的反应时间是30 min.     

废LCD面板有机材料水热资源化产乙酸

LCD面板主要由附着偏光片及液晶等有机材料的玻璃面板构成。有机材料的去除及资源化利用是废LCD面板处理的第一步。在水热条件下对废LCD面板进行了降解产酸研究。研究考察了反应温度、反应时间、氧化剂用量、水用量及pH值等对水热产乙酸产率及选择性的影响。通过正交实验确定了水热产乙酸的最佳操作条件：反应温度325℃,反应时间5min,氧化剂（30％H2O2）0．6mL,用水量2mL,近中性环境（pH6-6．5去离子水）。此条件下,乙酸产率及选择性分别为68．83％及70．56％。结果表明,以废LCD面板有机材料为原料,采用水热技术进行产乙酸反应,可实现其资源化再利用。