单壁碳纳米管材料对水稻幼苗的毒性效应

随着碳纳米管材料(CNTs)被广泛地应用于工业和商业等多个领域,其将不可避免地进入到大气、水和土壤环境中,从而对生态系统结构和功能产生一些负面影响.为明确进入水环境中的碳纳米管材料对农业生产的潜在危险,本实验采用水培法,研究了不同浓度(10、20、40mg·L~(-1))的单壁碳纳米管材料(SWCNTs)对萌发期内水稻的发芽率、根长耐性指数和幼苗生长期内水稻的鲜重、叶绿素和可溶性蛋白的影响,以及单壁碳纳米管材料在水稻根部的累积.结果表明,在萌发期,胁迫处理4 d后,与对照相比,10、20、40 mg·L-1SWCNTs处理组对水稻发芽率没有任何抑制作用,但会延迟种子的发芽时间;水稻根长耐性指数随着单壁碳纳米管材料浓度的增加而下降.在幼苗生长期,胁迫处理30 d后,与对照相比,水稻鲜重随着单壁碳纳米管材料浓度的增加而分别下降14.2%、21.0%和38.8%;与此相类似,水稻叶绿素和可溶性蛋白质含量随着单壁碳纳米管材料浓度的增加而下降;另外,通过透射电镜观察(TEM)发现,SWCNTs颗粒分布在水稻幼苗根尖表皮细胞的细胞壁中.SWCNTs对水稻生长起抑制作用,且随着浓度的增加抑制作用逐渐增强.     

碳排放权初始分配方法与问题分析

为了有效减缓气候变化对人类社会可持续发展的威胁,积极有效控制二氧化碳的排放刻不容缓。排污权交易理论的提出与发展为低成本高效率地解决气候变化问题提供了可能。在深入研究排污权交易理论以及对比初始排污权分配的方法基础上,结合国内排污权交易市场与碳金融市场的发展情况,为国内构建成熟的排污权交易市场提出建议。     

Activated carbon coated palygorskite as adsorbent by activation and its adsorption for methylene blue

An activation process for developing the surface and porous structure of palygorskite/carbon(PG/C) nanocomposite using ZnC l2 as activating agent was investigated. The obtained activated PG/C was characterized by X-ray diffraction(XRD), Fourier transform infrared spectroscopy(FTIR), field-emission scanning electron microscopy(SEM), and Brunauer–Emmett–Teller analysis(BET) techniques. The effects of activation conditions were examined,including activation temperature and impregnation ratio. With increased temperature and impregnation ratio, the collapse of the palygorskite crystal structure was found to accelerate and the carbon coated on the surface underwent further carbonization. XRD and SEM data confirmed that the palygorskite structure was destroyed and the carbon structure was developed during activation. The presence of the characteristic absorption peaks of C_C and C–H vibrations in the FTIR spectra suggested the occurrence of aromatization. The BET surface area improved by more than 11-fold(1201 m2/g for activated PG/C vs. 106 m2/g for PG/C) after activation, and the material appeared to be mainly microporous. The maximum adsorption capacity of methylene blue onto the activated PG/C reached 351 mg/g. The activated PG/C demonstrated better compressive strength than activated carbon without palygorskite clay.     

Heterogeneous oxidation of SO2 by O3-aged black carbon and its dithiothreitol oxidative potential

Ozone (O₃) is an important atmospheric oxidant. Black carbon (BC) particles released into the atmosphere undergo an aging process via O₃ oxidation. O₃-aged BC particles may change their uptake ability toward trace reducing gases such as SO₂ in the atmosphere, leading to different environmental and health effects. In this paper, the heterogeneous reaction process between O₃-aged BC and SO₂ was explored via in-situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). Combined with ion chromatography (IC), DRIFTS was used to qualitatively and quantitatively analyze the sulfate product. The results showed that O₃-aged BC had stronger SO₂ oxidation ability than fresh BC, and the reactive species/sites generated on the surface had an important role in the oxidation of SO₂. Relative humidity or 254 nm UV (ultraviolet) light illumination enhanced the oxidation uptake of SO₂ on O₃-aged BC. The oxidation potentials of the BC particles were detected via dithiothreitol (DTT) assay. The DTT activity over BC was decreased in the process of SO₂ reduction, with the consumption of oxidative active sites.     

Preparation of steel slag porous sound-absorbing material using coal powder as pore former

The aim of the study was to prepare a porous sound-absorbing material using steel slag and fly ash as the main raw material, with coal powder and sodium silicate used as a pore former and binder respectively. The influence of the experimental conditions such as the ratio of fly ash, sintering temperature, sintering time, and porosity regulation on the performance of the porous sound-absorbing material was investigated. The results showed that the specimens prepared by this method had high sound absorption performance and good mechanical properties, and the noise reduction coefficient and compressive strength could reach 0.50 and 6.5 MPa, respectively. The compressive strength increased when the dosage of fly ash and sintering temperature were raised. The noise reduction coefficient decreased with increasing ratio of fly ash and reducing pore former, and first increased and then decreased with the increase of sintering temperature and time. The optimum preparation conditions for the porous sound-absorbing material were a proportion of fly ash of 50% (wt.%), percentage of coal powder of 30% (wt.%), sintering temperature of 1130°C, and sintering time of 6.0 hr, which were determined by analyzing the properties of the sound-absorbing material.     

关于老工业区污染场地管理的探讨

根据在某老工业区第1批28块场地环境调查的实践,对污染场地管理中存在的问题进行了分析并提出了相应改进建议：①获取准确的场地资料难度很大,建议研究制定场地全过程档案管理制度;②工业企业关闭搬迁会产生新的环境污染风险,工业企业关闭搬迁应该成为污染场地管理的重要环节,环保部门应该在工业企业搬迁前介入,严格监管整个过程中的环境污染;③大量区域由于其中污染严重、风险高的场地缺乏修复资金而难以再开发利用,建议结合规划优先启动资金投入低的污染较轻区域修复,并同时对风险较高的污染场地进行风险管控,当区域开发取得一定规模、成就和收益后,可以整合资金力量和资源开展污染较重区域的修复。     

焦化行业环境风险预测应用

以焦化行业中典型企业——徐州某焦化生产企业年产100万t捣固焦生产线项目为例,采用新的评价体系和数学模式对项目环境风险进行定量的预测评价,在环境风险定量预测方面作出了有益的尝试,对同类焦化行业环境风险预测及防范具有很好的借鉴意义.     

珠三角表层沉积物的有机碳及其与卤系阻燃剂的关系

测定了珠江三角洲130个表层沉积物中总有机碳(TOC)和10类卤系阻燃剂(HFRs)的含量,并探讨了TOC与HFRs之间的关系.结果表明:珠三角表层沉积物TOC范围为0.16％～5.76％,平均值为1.25％,呈现明显的空间变化.在工业化程度较高的东莞和广州,沉积物中HFRs与TOC有显著的相关性,而西江和珠江口沉积物中HFRs与TOC的相关性较差,可能与珠江三角洲水动力过程、电子垃圾拆解活动和HFRs不同的来源有关.     

济宁南部区域耕作层土壤有机碳密度及储量研究

济宁市南部区域是著名的国家商品粮、优质大蒜、优质稻米和有机蔬菜生产基地,由于土壤有机碳作为农田生态系统中土壤肥力的重要组成成分之一,在土壤改良、作物质量和产量提高等方面都有十分重要的作用,因此,对济宁南部区域耕作层土壤有机碳密度及储量的研究具有十分重要的意义。本文以济宁南部煤田地区作为典型区域,以耕作层土壤(0~20cm)为研究对象,采集了79件耕作层土壤样品,利用元素分析仪测定了土壤样品中有机碳含量。经统计分析发现,各类型土壤有机碳密度介于1.92~4.83kg/m2之间,有机碳密度的加权平均值为4.03kg/m2,高于中国表层土壤有机碳密度的平均值2.97kg/m2;通过壤质类型分类而估算的有机碳总储量为4.57×109 kg,通过土壤利用方式分类而估算的有机碳总储量为4.53×109 kg,二者基本吻合;济宁南部区域耕作层土壤有机碳富集程度受人类活动影响较大,耕作层土壤中氮含量与有机碳的线性相关系数为0.924 9;另外,有机碳富集程度与秸秆返田规模也有着一定的关联。研究结果不仅为研究区今后开展耕作层土壤环境质量评价提供依据,也为区域生态平衡研究奠定了基础。     

活性炭纤维电吸附法去除饮用水氟离子方法探究

氟是人体必需的元素,对人体有着重要的生理功能。如果人摄入的氟过量,人体将受到较大危害。除氟的方法有很多,电吸附方法是将传统的吸附技术与电化学方法融合,使得电吸附方法与传统的去离子方法相比具有相当的优势：无二次污染,能量利用率高,操作简单,是具有研究和开发价值的清洁型技术。用活性炭纤维做吸附剂对蒸馏水配制成的含氟水去除率显著,为了达到氟离子去除效果,要调节温度、电极电势以及原液浓度,注意电极与吸附材料的选择。