CFCs生产企业废水及产品成分快速检测分析

采用车载GC-MS技术,建立了顶空-GC-MS方法对CFCs产品组分及排污废水中三氯一氟甲烷、二氯二氟甲烷、四氯化碳等成分进行监测分析,实现了快速鉴定企业是否违规生产CFCs相关产品,对于判定企业是否违规提供技术依据。同时,采用顶空-GC/ECD方法对废水中的四氯化碳进行定量分析,以排查企业是否超标排污。     

空气湿度对低浓度有机蒸气在活性炭上吸附平衡的影响

采用吸附柱穿透曲线法测定了30℃不同相对湿度（RH）下4种低浓度有机蒸气（VOC）在活性炭上的等温吸附量，结果表明，水蒸汽对VOC吸附平衡的抑制作用。随着RH的增大，VOC浓度的降低而增大，且随着VOC分子极性的增强则有所增大；VOC水蒸汽吸了平衡的抑制作用，随着VOC分子极性的增强是有所减弱，提出一个基于竞争吸附机理的olanyi-Dubi-min方程，解释空气湿度对低浓度VOC在活性炭吸附平衡的影响。     

Impact of density of coating agent on antibacterial activity of silver nanoparticle impregnated plasma treated activated carbon

To use stabilized nanoparticles(NPs) in water as disinfectants over a very long period, the amount of coating agent(for NP stabilization) needs to be optimized. To this end, silver nanoparticles(Ag-NPs) with two different coating densities of tri-sodium citrate(12.05 and46.17 molecules/nm~2, respectively), yet of very similar particle size(29 and 27 nm, respectively)were synthesized. Both sets of citrate capped NPs were then separately impregnated on plasma treated activated carbon(AC), with similar Ag loading of 0.8 and 0.82 wt.%, respectively. On passing contaminated water(containing 10~4 CFU Escherichia coli/m L of water) through a continuous flow-column packed with Ag/AC, zero cell concentration was achieved in 22 and 39 min, with Ag-NPs(impregnated on AC, named as Ag/AC) having lower and higher coating density, respectively. Therefore, even on ensuring similar Ag-NP size and loading, there is a significant difference in antibacterial performance based on citrate coating density in Ag/AC.This is observed in lower coating density case, due to both:(i) higher Ag~+ ion release from Ag-NP and(ii) stronger binding of individual Ag-NPs on AC. The latter ensures that, Ag-NP does not detach from the AC surface for a long duration. TGA-DSC shows that Ag-NPs with a low coating density bind to AC with 4.55 times higher adsorption energy, compared to Ag/AC with a high coating density, implying stronger binding. Therefore, coating density is an important parameter for achieving higher antibacterial efficacy, translating into a faster decontamination rate in experiments, over a long period of flow-column operation.     

活性炭纤维去除水中有机微污染物的效果

采用 4种活性炭纤维 (ACF)作为吸附剂 ,对水中 CHCl₃、CCl₄、高锰酸钾指数 COD_Mn、紫外吸光值 E_UV254等有机微污染物的去除进行了初步研究 ,并与 ZJ-15型颗粒活性炭 (GAC)进行了对比 .吸附等温线的结果表明 ,ACF3对 CHCl₃的去除效果最好 ,当 CHCl₃的平衡浓度为 60μg· L^-1 时 ,ACF3对 CHCl₃的吸附容量为 212μg·g^-1 ;GAC对 CCl₄的去除效果最好 ,当 CCl₄的平衡浓度为 3μg· L^-1时 ,GAC对 CCl₄的吸附容量为 0.83μg·g^-1;GAC及 ACF1对 COD_Mn、E_UV254有较好的去除效果 ,当COD_Mn的平衡浓度为 2.5mg·L^-1 时 ,GAC及 ACF1对 CODMn的吸附容量分别为 2.16mg·g^-1 和 1.98mg·g^-1 ,当 E_UV254的平衡浓度为 0.05时 ,GAC及 ACF1对 E_UV254的吸附容量分别为 0.32 g^-1和 0.15g^-1.     

大气总悬浮颗粒中有机碳的测定

本文提出一种新的高灵敏度测定总悬浮颗粒中有机碳的方法一元素分析法。该方法是在氧化炉最佳温度为６００℃时,一步测定出样品中有机碳的含量,并成功地对齐齐哈尔市大气总悬浮颗粒中的有机碳进行了连续的监测。结果表明,总悬浮颗粒中有机碳的含量有较明显的变化规律。     

分子筛孔结构对CO_2吸附性能的影响

采用巨正则蒙特卡罗方法模拟了CO_2在FAU分子筛上的吸附情况,比较了不同CO_2逸度下,CO_2在分子筛模型上的吸附位、吸附量的变化,拟合了其吸附等温线。结果表明:在吸附饱和状态下,分子筛的孔结构越大,对CO_2的吸附量越大,对于比CO_2分子更小的微孔结构,吸附几乎不发生;在低逸度下,CO_2的吸附主要发生在小孔内,随着逸度的提高,CO_2的吸附量迅速上升;在高逸度下,吸附量的提高主要发生在大孔内;FAU分子筛吸附CO_2的过程符合Ⅰ型Langmuir吸附等温线,在高压下对CO_2的吸附能力远大于低压下的吸附能力。     

颗粒状污泥活性炭流化床吸附处理含铜矿山废水

以城市污水处理厂活性污泥为原料,通过高温热解制备了颗粒状污泥活性炭吸附剂。在自制的流化床吸附装置上研究了该吸附剂对含铜矿山废水的吸附处理效果。实验结果表明：在初始废水pH6、吸附剂加入量15g/L、废水循环流量6.0L/min、吸附时间120min的最佳吸附条件下,废水中Cu²⁺去除率达98.2%。     

中原城市群区域碳储量的时空变化和预测研究

为了有效评估中原城市群碳储量,运用灰色预测模型获取动态碳密度数据,结合Dyna-CLUE模型和InVEST模型,动态评估2005~2030年土地利用变化下不同情景的碳储量演变特征,以及城市发展对碳储量的影响.结果表明,2005~2020年中原城市群碳储量分别为1689.59×10⁶t、2035.36×10⁶t、2066.34×10⁶t和2093.05×10⁶t,呈现持续增加趋势;2030年经济发展情景、生态保护情景和经济生态协调发展情景下碳储量分别为2162.45×10⁶t、2179.39×10⁶t和2174.28×10⁶t,经济发展情景下碳储量最低,生态保护情景下碳储量最高.碳储量变化与土地利用面积变化密切相关,主要表现为耕地面积的下降导致其碳储量减少约250×10⁶t,林地面积的扩张导致其碳储量增加约103.4×10⁶t,建设用地的扩张导致其碳储量增加约87.77×10⁶t;耕地和草地面积与总碳储量呈较弱的负相关关系,林地、水域、建设用地和未利用地面积与总碳储量呈较强的正相关关系.2005~2030年中原城市群30个城市的碳储量分别为11.38×10⁶t~214.24×10⁶t,碳储量的变化反映出城市土地碳排放在2030年之前已经达到峰值,且经济生态协调发展情景可能更适合未来城市发展的目标.     

产品碳足迹评价中不确定度与敏感度相结合的数据质量分析

产品碳足迹评价中,数据种类、来源、获取途径和量化方法的选择不同将直接影响到评价结果的可靠与否.本文建立了结合敏感度和DQI-Monte Carlo不确定度分析的产品碳足迹评价数据质量分析模型.首先通过敏感度分析识别出产品碳足迹评价中的主要数据,再采用DQI-Monte Carlo不确定度分析方法对主要数据进行数据质量判定,甄选出影响评价结果可靠性的关键数据,并由此有针对性地提出数据质量改进意见,从而有效地优化数据收集方案,减少碳足迹评价结果的不确定度.建立的方法应用于我国某塑料软包装印刷企业的印刷前阶段碳足迹评价中.     

Absorption characteristics of new solvent based on a blend of AMP and 1,8-diamino-p-menthane for CO2 absorption

Aqueous 1,8-diamino-p-menthane (KIER-C3) and commercially available amine solutions were tested for CO₂ absorption. A 2-amino- 2-methyl-1-propanol (AMP) solution with an addition of KIER-C3 showed 9.3% and 31.6% higher absorption rate for CO₂ than the AMP solution with an addition of monoethanolamine (MEA) and ammonia (NH₃), respectively. The reaction rate constant for CO₂ absorption by the AMP/KIER-C3 solution was determined by the following equation: k_2,AMP/C3 = 7.702×10⁶ exp (-2248.03/T). A CO₂ loading ratio of the AMP/KIER-C3 solution was also 2 and 3.4-times higher than that of the AMP/NH3 solution and the AMP/MEA solution, respectively. Based on the experimental results, KIER-C3 may be used as an excellent additive to increase CO₂ absorption capability of AMP.