ACCU采样和PIXE技术用于PM10污染溯源的研究

使用美国RP公司生产的多通道自动采样系统(ACCU)在上海吴淞工业区进行冬季3个月8个不同风向的PM10采样；使用质子激发X荧光发射方法(PIXE)测定颗粒物中18个无机元素浓度．结果发现，8个风向的质量浓度分布取决于不同方位的大气质量状况．将大气颗粒物中的元素浓度作为环境污染指纹，8个方位的无机元素浓度分布与采样点周围的居民住宅、道路交通和工矿企业的排放密切相关，表明该方法能准确地确定排放源的范围和污染来源．研究结果表明，ACCU采样系统和PIXE分析技术的优化组合可为大气污染溯源、治理和改善环境空气质量提供一种快速和准确可靠的新方法．     

Solid phase extraction of methomyl and thiodicarb from environmental water with an activated carbon cartridge and their determination by HPLC

ＩｎｔｒｏｄｕｃｔｉｏｎＢｏｔｈｍｅｔｈｏｍｙｌａｎｄｔｈｉｏｄｉｃａｒｂａｒｅＮｍｅｔｈｙｌｃａｒｂｍａｔｅｐｅｓｔｉｃｉｄｅｓ.Ｍｅｔｈｏｍｙｌｉｓｅｆｆｅｃｔｉｖｅｏｎａｗｉｄｅｒａｎｇｅｏｆｉｎｓｅｃｔｓａｓａｎｏｖｉｃｉｄｅ,ｌａｒｖｉｃｉｄ...     

Characteristics of air particulate matter and their sources inurban and rural area of Beijing, China

ＩｎｔｒｏｄｕｃｔｉｏｎＴｈｅｒｅｉｓａｇｒｏｗｉｎｇａｗａｒｅｎｅｓｓｔｏｔｈｅｉｍｐｏｒｔａｎｃｅｏｆａｉｒｐｏｌｌｕｔｉｏｎｉｎｍａｊｏｒｃｉｔｅｓ.Ａｎｕｍｂｅｒｏｆｓｔｕｄｉｅｓｈａｖｅｓｈｏｗｎｔｈａｔｔｈｅｃｏｎｃｅｎｔｒａｔｉｏｎｓｏｆｃｅｒｔａｉｎｔｒａｃｅｅｌｅｍｅｎｔｓｉｎｔｈｅｕｒｂａｎａｔｍｏｓｐｈｅｒｅｈａｖｅｂｅｅｎｅｌｅｖａｔｅｄｂｙ ｐｏｌｌｕｔｉｏｎ ,ａｎｄｔｈｅｒｅｆｏｒｅ ,ｔｈｅｈｉｇｈｅｓｔｃｏｎｃｅｎｔｒａｔｉｏｎｓｏｆｔｈｅｓｅｃｈｅｍｉｃａｌｃｏｎｔ…     

载银活性碳纤维对大肠杆菌吸附作用的研究

以大肠杆菌（Ｅｓｃｈｅｒｉｃｈｉａｃｏｌｉ）为对象，通过细菌吸附实验研究了载银活性碳纤维（ＡＣＦ（Ａｇ））对大肠杆菌的吸附特性．借助扫描电子显微镜（ＳＥＭ）进行细菌分布形态的观察和细菌数量的计算．结果表明，大肠杆菌易分布于ＡＣＦ（Ａｇ）表面的沟槽处；ＡＣＦ（Ａｇ）吸附的细菌数量随银含量、比表面积的增加而增大．此外，细菌吸附量还与ＡＣＦ（Ａｇ）表面银颗粒的大小有关．对吸附细菌的动力学亦进行了研究．     

粉煤灰分选工艺流程的改进

利用闲置设备进行流程改进，提高了粉煤灰的利用率，解决了制砖所需的细骨料。每年节省运灰费用２００多万元，具有良好的经济效益和环境效益     

饮用水中氯化产物水合氯醛、三氯乙酸的活性炭富集顶空分析法研究

以活性炭为富集材料,经酸化和甲酯衍生化后,饮用水中非挥发性的水合氯醛和三氯乙酸可以从活性炭的吸附态定量地释出气体,利用顶空法取样,GC/ECD进行测定。对不同水样检测结果表明,饮用水中水合氯醛、三氯乙酸来自氯化消毒过程。控制水源有机质污染,装置活性炭过滤器,延长烧水煮沸时间,可有效地减少人体对其摄入量。     

Chance-constrained programming (CCP)abatement of SO_2 emission for acid deposition control in Liuzhou City

A deterministic linear programming model which optimizes the abatement of each SO2 emission source, is extended into a CCP form by introducing equations of probabilistic constrained through the incorporation of uncertainty in the source-receptor-specific transfer coefficients. Based on the calculation of SO2 and sulfate average residence time for Liuzhou City, a sulfur deposition model has been developed and the distribution of transfer coefficients have been found to be approximately log-normal. Sulfur removal minimization of the model shows that the abatement of emission sources in the city is more effective, while control cost optimization provides the lowest cost programmes for source abatement at each allowable deposition limit under varied environmental risk levels. Finally a practicable programme is recommended.     

Adsorption performance of CMK-3 and C-FDU-15 in NO removal at low temperature

CMK-3 and C-FDU-15 samples were synthesized using hard-templating and evaporationinduced self-assembly(EISA) methods,respectively.The pore structures of CMK-3 and CFDU-15 as well as commercial activated carbon were characterized by means of X-ray diffraction,field emission scanning electron microscopy,transmission electron microscopy,and N_2 adsorption–desorption.Adsorption of NO was investigated by means of thermogravimetric analysis,temperature-programmed desorption of NO + O_2,and in situ diffuse reflectance Fourier transform infrared spectroscopy.The results show that the CMK-3 and C-FDU-15 materials possessed ordered and uniform structures.The coadsorption capacity of NO and O_2 decreased in the sequence CMK-3(88.6 mg/g) C-FDU-15(71.7 mg/g) AC(25.3 mg/g).There were two main adsorption species on CMK-3 and CFDU-15:nitrite and nitrate.Nitrite is converted to nitrate easily.However,the adsorption species were more complex on AC,with nitrite being the main species.Moreover,CMK-3 and C-FDU-15 exhibit excellent regeneration efficiency compared with AC.The excellent NO adsorption performance of CMK-3 and C-FDU-15 was associated with their ordered mesoporous structures and high surface areas.The research provides more options for NO adsorption in the future.     

生物过滤饮用水深度处理:机遇与挑战

源水水质的恶化给传统的饮用水处理工艺带来了挑战.生物过滤是饮用水消毒输配之前管理、维护及增强颗粒滤料表面生物活性以去除有机和无机物的过程.由于具有高效、低成本等优点，生物过滤在饮用水深度处理工艺中逐渐得到广泛的应用.本文综述了生物过滤在饮用水处理过程中对水中溶解性有机质（消毒副产物前体物）的去除、微量污染物的削减、嗅味化合物及氨氮的去除等.此外，针对生物过滤在水深度处理过程中存在的问题，本文详细讨论了含氮消毒副产物前体物的生成、低温下生物过滤效能下降等挑战，并提出了今后需要研究的问题.     

含油废水深度处理后回用于港区除尘系统的设计与运行

介绍了某港区作业区利用处理后的含油废水深度处理后回用于港口煤炭除尘系统工程的设计、运行和管理。该系统设计处理量为400m^3／d。采用了水解酸化预处理 生物接触氧化 生物活性炭的处理工艺流程，处理后的污水主要用于港区煤炭储存场冲洗地面、洒水抑尘等。