淀粉/凹凸棒粘土复合吸附絮凝材料的研究

采用接枝聚合法在硅烷化凹凸棒粘土(OATP)表面接枝淀粉,制备淀粉/凹凸棒粘土(ATP)复合吸附絮凝材料.采用傅里叶变换红外光谱(FT-IR)、扫描电子显微镜(SEM)对淀粉/ATP进行了表征,并对其制备条件进行了优化.结果表明,当淀粉质量分数(相对OATP质量)为100%,聚合反应时间为3 h,引发剂质量分数为0.003%,反应温度为60℃时,制备的淀粉/ATP对镉离子的最大吸附容量可达到36.78 mg/g.与ATP、OATP相比,淀粉/ATP对镉离子的吸附容量增大了2倍以上.复合材料具有比OATP更强的捕获能力,所形成的絮凝体大而密实,比淀粉絮凝剂具有更好的沉降性能.     

铈插层黏土负载铁催化剂在H2S选择性催化氧化过程中催化性能的研究

合成了铈插层的Laponite黏土材料(Ce-Lap),并以此材料为载体,分别负载质量分数为3%、5%、8%、10%的Fe制备Fe/Ce-Lap催化剂,通过XRD、氮气吸脱附曲线、XRF、TG、FT-IR、O2-TPD、H2-TPR、XPS等手段,对催化剂的物理化学性质进行了表征测试,并考察了催化剂在H2S选择性催化氧化反应过程中的活性.结果表明,5%的Fe/Ce-Lap在180℃时表现出最好的催化活性,能达到96%的硫产率,这归因于Fe与Ce之间的相互作用,改善了Fe3+的氧化还原能力.此外,较高的氧吸附能力及铁物种的高分散度促进了氧化反应的进行.     

Photoassisted Fenton degradation of phthalocyanine dyes from wastewater of printing industry using Fe(Ⅱ)/γ-Al2O3 catalyst in up-flow fluidized-bed

Fe(II)/γ-Al2O3 powders synthesized using the dipping method were produced from a mixed aqueous solution containing aluminium oxide(γ-Al2O3) and iron(II)-precursor(FeSO4), and used for photoFenton degradation of phthalocyanine dyes(PCS) under ultraviolet(UV) irradiation in an up-flow fluidized bed. The catalysts were characterized by XRD, ESCA, BET, EDS and SEM. The results showed that Fe2+ion was compounded on the γ-Al2O3 carrier. The effects of different reaction parameters such as catalyst activity, dosage and solution pH on the decolorization of PCS were assessed. Results indicated that maximum decolorization(more than 95%) of PCS occurred with20 wt% Fe(II)/γ-Al2O3 catalyst(dosage of 60 g/L) using a combination of UV irradiation and heterogeneous Fenton system. The degradation efficiency of PCSincreases as pH decreases, exhibiting a maximum efficiency at pH 3.5. The recycled catalyst was capable of repeating three runs without a significant decrease in treatment efficiency, and this demonstrated the stability and reusability of catalyst.     

Comparison of different disinfection processes in the effective removal of antibiotic-resistant bacteria and genes

This study compared three different disinfection processes(chlorination, E-beam, and ozone) and the efficacy of three oxidants(H2O2, S2O-8, and peroxymonosulfate(MPS)) in removing antibiotic resistant bacteria(ARB) and antibiotic resistance genes(ARGs) in a synthetic wastewater. More than30 mg/L of chlorine was needed to remove over 90% of ARB and ARG. For the E-beam method, only1 dose(kGy) was needed to remove ARB and ARG, and ozone could reduce ARB and ARG by more than 90% even at 3 mg/L ozone concentration. In the ozone process, CT values(concentration × time)were compared for ozone alone and combined with different catalysts based on the 2-log removal of ARB and ARG. Ozone treatment yielded a value of 31 and 33(mg·min)/L for ARB and ARGs respectively. On the other hand, ozone with persulfate yielded 15.9 and 18.5(mg·min)/L while ozone with monopersulfate yielded a value of 12 and 14.5(mg·min)/L. This implies that the addition of these catalysts significantly reduces the contact time to achieve a 2-log removal, thus enhancing the process in terms of its kinetics.     

气相中乙酸乙酯光解的光子效率:波长和催化剂的影响

采用4种不同波长的准分子光源(Xe Cl*、Kr Cl*、Xe Br*和Kr Br*)降解气相的乙酸乙酯.对比了外加3种负载型光催化剂(有机膜负载Ti O2、有机膜负载石墨烯和纱网负载Ti O2)条件下乙酸乙酯的去除率,考察了光源类型、辐射功率和气体初始浓度对去除率的影响.同时,测定了不同光源的辐射光谱和辐射功率,计算了不同反应条件下的光子效率.结果表明,乙酸乙酯去除率按Kr Br*Kr Cl*Xe Cl*Xe Br*依次降低,而Xe Cl*和Kr Br*光源降解乙酸乙酯气体可以得到较高的光子效率;有机膜负载Ti O2比不加催化剂时乙酸乙酯去除率和光子效率都有所提高,但提高幅度不大.气体流速和乙酸乙酯初始浓度升高,光子效率升高.采用Kr Br*准分子灯直接光解乙酸乙酯,实验条件为:辐射功率0.76 W,乙酸乙酯初始浓度946mg·m-3,气体流速600 m L·min-1,光子效率为5.63%.     

改性贵金属催化剂催化还原脱除NO

含有NO的工业废气直接排放会严重污染空气,须对含有NO的工业废气进行净化处理.采用NH3为还原剂贵金属铂催化剂进行了低温还原NO脱除烟气中氮氧化物性能的研究.结果表明:实验室制备的贵金属铂催化剂具有高的低温活性和选择性催化还原脱除NO的性能,但该催化剂易被原料气中少量的硫化物(SO₂)中毒而影响其稳定性;用稀土元素La和Ce对贵金属铂催化剂进行改性,改性后贵金属铂催化剂的稳定性得到了大幅度提高,出口气体中氮氧化物浓度大幅度降低.本实验Pt∶La∶Ce最佳摩尔比为1∶3.78∶3.56.     

Preparation and characterization of Fe2O3-CeO2-TiO2/γ-Al2O3 catalyst for degradation dye wastewater

In order to develop a catalyst with high activity for catalytic wet oxidation （CWO） process at room temperature and atmospheric pressure, Fe2O3-CeO2-TiO2/γ-Al2O3 catalyst was prepared by consecutive impregnation method and the prepared parameters were optimized. The structure of the catalyst was characterized by BET, XRF, SEM and XPS technologies, and the actual wastewater was used to investigate the catalytic activity of Fe2O3-CeO2-TiO2/γ-Al2O3 in CWO process. The experimental results showed that the prepared catalyst exhibited good catalytic activity when the doping amount of Ti was 1.0 wt% （the weight ratio of Ti to carriers）, and the middle product, Fe2O3-CeO2-TiO2/γ-Al2O3, was calcined in 450℃ for 2 h. The CWO experiment for treating actual dye wastewater indicated that the COD, color and TOC of actual wastewater were decreased by 62.23%, 50.12% and 41.26% in 3 h, respectively, and the ratio of BOD5/COD was increased from 0.19 to 0.30.     

沼渣生物炭基Fenton催化剂的制备及其高效降解吡虫啉农药废水的研究

以废弃物沼渣和含铁剩余污泥为原料,采用一步热解法制备沼渣生物炭基Fenton催化剂(以下简称催化剂),构建了非均相Fenton反应体系处理含吡虫啉模拟废水,考察了H2 O2和催化剂用量对吡虫啉去除率的影响.结果表明,非均相Fenton反应体系中,H2 O2最佳投加量为0.50 g/L,催化剂最佳投加量为1.00 g/L...     

废催化剂中金属的回收

简述了含有铂、钒、镍金属组分的废催化剂来源及金属回收工艺，介绍了萃取法在金属回收中的应用。     

从废催化剂中回收钼的新工艺

确定了用新型复合浸取剂从废催化剂中回收钼的最佳工艺条件废催化剂颗粒度１００目焙烧温度７５０℃,焙烧时间１ｈ复合浸取剂中助浸剂质量为５％,浸取固液质量比１：３,浸取温度６０℃,浸取时间６ｈ,在该条件下,钼的浸取率达到９２．７％～９５．５％。