V2O5/TiO2催化剂中毒机理的试验研究

选择性催化还原(SCR)催化剂是SCR烟气脱硝技术的核心,是整个SCR系统脱硝效率和经济性的决定因素.本文工作的主要研究思路是以钒钛SCR催化剂为研究对象,研究了H2O和SO2,以及相同含量下K、Na、Ca、Pb的氧化物对钒钛催化剂NO转化率的影响.H2O的存在会抑制V2O5/TiO2催化剂脱硝活性,而SO2在一定程度上促进(V2O5/TiO2)催化剂的SCR脱硝反应,提高NO转化率;碱金属K对钒钛催化剂的钝化作用都是最强,K2O和Na2O的掺入会抑制钒钛催化剂上V2O5的还原能力,而CaO和PbO的掺入对钒钛催化剂上V2O5的还原能力影响较小.     

Photocatalytic degradation of dye effluent by titanium dioxide pillar pellets in aqueous solution

Photocatalytic oxidation (PCO) process is an effective way to deal with organic pollutants in wastewater which could be difficult to be degraded by conventional biological treatment methods. Normally the TiO2 powder in nanometre size range was directly used as photocatalyst for dye degradation in wastewater. However the titanium dioxide powder was arduous to be recovered from the solution after treatment. In this application, a new form of TiO2(i. e. pillar pellets ranging from 2.5 to 5.3 mm long and with a diameter of 3.7 mm) was used and investigated for photocatalytic degradation of textile dye effluent. A test system was built with a flat plate reactor(FPR) and UV light source(blacklight and solar simulator as light source respectively) for investigating the effectiveness of the new form of TiO2. It was found that the photocatalytic process under this configuration could efficiently remove colours from textile dyeing effluent. Comparing with the TiO2 powder, the pellet was very easy to recovered from the treated solution and can be reused in multiple times without the significant change on the photocatalytic property. The results also showed that to achieve the same photocatalytic performance, the FPR area by pellets was about 91% smaller than required by TiO2 powder. At least TiO2 pellet could be used as an alternative form of photocatalyst in applications for textile effluent treatment process, also other wastewater treatment processes.     

雷达吸波涂层海洋大气环境适用性试验研究

目的 分析一种雷达吸波隐身涂层在海洋大气自然环境下性能的变化规律。方法 对12个月不同阶段涂层的常规物理性能和电性能进行检测,其中常规物理性能包括宏观形貌、金相形貌、微观性能、附着力、抗冲击强度和红外光谱。结果 从宏观形貌看,涂层明度和色差值呈上升趋势,12个月明度增加1.22,色差值增加2.91,颜色向绿色和蓝色发展,失光率先增大、后减小,最大失光率为9个月时的34%。涂层附着力和试验时间呈现非线性关系,6个月时,附着力降低了18%,12个月时增大了24%。涂层在2～18GHz的频率范围内,吸波曲线大体呈“U”形,最低反射率随时间向低频方向偏移。涂层金相形貌、微观性能、抗冲击强度和红外光谱特征总体变化不明显。结论 在1a内,自然海洋大气环境对雷达吸波隐身涂层常规物理性能和电性能产生了一定影响,但在试验时间相对较短情况下,海洋大气环境对涂层老化的影响作用尚未充分显示,需要结合更长周期的试验数据进一步分析。     

用废腈纶制备高分子增稠剂

以废腈纶为原料，经碱法水解反应和扩链反应制取乳液用高分子增稠剂。水解工艺条件为水解温度95℃，水解时间4h；水解配方为m(PAN)：m(NaOH)：m(H2O)=1：0．6：5；扩链反应温度95℃，扩链反应时间约4h。对不同乳液体系进行的增稠性能评价及应用表明，利用该技术制备出的高分子增稠剂性能优良，应用范围广泛。现已建成一套生产能力为1000t/a的工业装置。     

蜂窝状Ce/Cr掺杂Cu基催化剂用于乙烷的催化燃烧

以蜂窝堇青石陶瓷为载体,采用浸渍法负载氧化铝涂层和活性组分,制备了蜂窝状Ce/Cr掺杂Cu基催化剂。运用BET,XRD,XPS,H₂-TPR技术对催化剂进行了表征,并对其乙烷催化燃烧活性进行了评价。表征结果显示,Ce/Cr掺杂提高了催化剂表面化学吸附氧的含量,提升了催化剂在较低温度下的氧化还原性能。实验结果表明：在入口乙烷质量浓度2 000 mg/m³、反应空速20 000 h^-1的条件下,Cu-Ce催化剂较Cu催化剂的T₅₀和T₉₀（乙烷转化率为50%和90%时的反应温度）分别降低了46 ℃和101 ℃,降幅高于Cu-Cr催化剂的38 ℃和78 ℃;较高反应空速（30 000 h^-1）对催化反应不利,乙烷浓度对催化剂活性的影响不明显;550 ℃下Cu-Ce催化剂对乙烷的转化率100 h内保持在99%以上,表现出良好的稳定性。     

GO-TiO2改性中空纤维膜的制备条件及抗污染性能研究

以氧化石墨烯(GO)与纳米二氧化钛(TiO_2)为改性剂,采用界面聚合法与抽滤吸附结合,对聚偏氟乙烯中空纤维超滤膜(简称原膜)进行表面改性,得到新型纳米改性膜(简称GO-TiO_2改性膜).研究改性膜的制备工艺条件及其对腐殖酸(HA)的吸附截留性能与抗污染特性.结果表明:(1)最佳制备工艺条件为:钛酸丁酯2 m L、GO 1 mg、间苯二胺1%(质量分数)、间苯二胺浸泡时间8 min、均苯三甲酰氯0.2%(质量分数)、均苯三甲酰氯浸泡时间10 min;(2)亲水性提高显著,亲水性表面为GO-聚酰胺-TiO_2复合结构,改性膜接触角由80.6°±1.8°下降到38.6°±1.2°;(3)抗污染性能提高明显.改性膜通量总衰减率由改性前的51.2%下降到35.6%,过滤周期约为原膜的2.5倍;反冲洗后膜通量恢复率由69%提高到96%.     

Fe-Mn-sepiolite as an effective heterogeneous Fenton-like catalyst for the decolorization of reactive brilliant blue

A study of the decolorization of reactive brilliant blue in an aqueous solution using Fe-Mn-sepiolite as a heterogeneous Fenton-like catalyst has been performed. The Fourier transform infrared (FTIR) spectra of the catalyst showed bending vibrations of the Fe-O. The X-ray diffraction (XRD) patterns of the catalyst showed characteristic diffraction peaks of α-Fe₂O₃, γ-Fe₂O₃ and MnO. A four factor central composite design (CCD) coupled with response surface methodology (RSM) was applied to evaluate and optimize the important variables (catalyst addition, hydrogen peroxide dosage, initial pH value and initial dye concentration). When the reaction conditions were catalyst dosage= 0.4 g, [H₂O₂]= 0.3 mL, pH= 2.5, [reactive brilliant blue]_o = 50 mg·L⁻¹, and volume of solution= 500 mL at room temperature, the decolorization efficiency of reactive brilliant blue was 91.98% within 60 min. Moreover, the Fe-Mn-sepiolite catalyst had good stability for the degradation of reactive brilliant blue even after six cycles. Leaching of iron ions (<0.4 mg·L⁻¹) was observed. The decoloring process was reactive brilliant blue specific via a redox reaction. The benzene ring and naphthalene ring were first oxidized to open ring; these were then oxidized to the alcohol and carboxylic acid. The reactive brilliant blue was decomposed mainly by the attack of ·OH radicals including surface-bound ·OH radicals generated on the catalyst surface.     

Chemical poison and regeneration of SCR catalysts for NOx removal from stationary sources

Selective catalytic reduction (SCR) of NO_x with NH₃ is an effective technique to remove NO_x from stationary sources, such as coal-fired power plant and industrial boilers. Some of elements in the fly ash deactivate the catalyst due to strong chemisorptions on the active sites. The poisons may act by simply blocking active sites or alter the adsorption behaviors of reactants and products by an electronic interaction. This review is mainly focused on the chemical poisoning on V₂O₅-based catalysts, environmental-benign catalysts and low temperature catalysts. Several common poisons including alkali/alkaline earth metals, SO₂ and heavy metals etc. are referred and their poisoning mechanisms on catalysts are discussed. The regeneration methods of poisoned catalysts and the development of poison-resistance catalysts are also compared and analyzed. Finally, future research directions in developing poisoning resistance catalysts and facile efficient regeneration methods for SCR catalysts are proposed.     

复合金属氧化物Cu-Co-Al低温催化水解HCN

采用共沉淀法制备了Cu-Al、Co-Al和Cu-Co-Al复合金属氧化物催化剂,考察了3种催化剂对HCN的催化水解性能,并通过XRD、BET、XPS和H2-TPR等对催化剂的结构和性能进行表征.结果表明, Cu-Co-Al催化剂展示最高的催化活性. 反应温度200℃,反应180min后, Cu-Co-Al、Cu-Al和Co-Al催化剂对HCN的转化率分别为95%,90%,10%;NH3生成量分别为122,118,18mg/m3.低结晶度、高分散性、高比表面积的催化剂有利于低温HCN水解.适量的表面分子氧含量、较高的Cu2+和Co3+含量、较低的还原温度是Cu-Co-Al催化剂具有较高的HCN低温水解活性的主要原因.     

DOC+CDPF对生物柴油燃烧颗粒排放特性的影响

以一台满足国五排放法规的车用柴油机为样机,研究加装氧化催化转化器DOC与催化型颗粒捕集器CDPF(DOC+CDPF后处理装置)前后,柴油机燃用B20燃料(燃料含20%体积掺混比的生物柴油)的颗粒排放特性.结果表明,在未加装该后处理装置时,该机排气颗粒数量浓度的粒径分布呈双峰形态,B20燃料的排气颗粒数量浓度的峰值粒径在10nm和50nm附近,纯柴油的排气颗粒数量浓度的峰值粒径在50nm和200nm附近.在颗粒粒径小于120nm的区域,该机燃用B20燃料的排气颗粒数量浓度大于纯柴油.加装该后处理装置后,该机排气颗粒数量浓度的粒径分布呈多峰形态,峰值粒径在10nm、20nm和60nm附近.加装DOC+CDPF后,不论是柴油还是B20燃料,与原机相比,柴油机排气颗粒总数量下降明显,其中60~200nm粒径范围的颗粒数量浓度降幅更为显著.在相同工况下,DOC+CDPF对柴油机燃用B20燃料的颗粒总数量净化效率高于纯柴油.