淀粉改性混凝剂复合硅酸盐对微污染水强化混凝性能研究

传统混凝工艺对微污染地表水净化效果有限,此外,近年来淀粉等天然高分子混凝剂由于绿色环保等特点而备受关注.本研究采用一种阳离子改性淀粉材料(淀粉-3-氯-2-羟丙基三甲基氯化铵,St-CTA)为混凝剂,分别与实验室自制的聚硅酸(PSA)及聚硅酸钛锌(PSTZ)进行复合强化混凝,应用于处理微污染水体.首先以高岭土-腐殖酸(HA)混合液为模拟水样,基于表观混凝性能、絮体特征及混凝后上清液ζ电位等,详细考察了强化混凝工艺的净水效果及混凝机制.结果表明,St-CTA分别复合两种不同硅酸盐的强化混凝工艺均对模拟水样具有良好的净水效果;St-CTA与PSTZ复合优于其与PSA组合工艺的混凝性能,且St-CTA/PSTZ复合工艺能缓解St-CTA过量引起的再稳定效应,具有较宽的有效混凝范围.St-CTA通过电中和作用与污染物结合,可有效压缩表面双电层;而带正电性的PSTZ,相比于负电性的 PSA,不仅具有粘结架桥强化效应,还具有电中和作用,且与HA可形成Zn-HA复合物,实现高效净水效果.除模拟水样外,还考察了两种强化混凝工艺对实际微污染地表水的混凝效果,其均表现出良好的混凝性能,有效弥补单一混凝剂对有机微污染水体混凝效率较低的不足,进一步证实了该强化混凝工艺的有效性.此外,与处理模拟水样效果一致,St-CTA复合PSTZ的净化效果更佳,但PSA具有更低的应用成本.本研究提供了一种绿色环保的强化混凝工艺,可有效净化微污染水体,具有良好的应用前景.     

不同氧化法对模拟聚合物驱废水降黏效果的影响

分别采用UV-Fenton试剂氧化法、次氯酸钙氧化法和二氧化氯氧化法处理模拟聚合物驱废水,考察了各工艺条件对废水降黏效果的影响。实验结果表明:在初始废水pH为7、反应温度为50℃、反应时间为20 min的条件下,UV-Fenton试剂氧化法适宜的H2O2加入量为1 mmol/L,n(H2O2)∶n(Fe2+)=10,处理后废水降黏率达65.7%;次氯酸钙氧化法适宜的次氯酸钙加入量为500 mg/L,处理后废水降黏率达81.7%;二氧化氯氧化法适宜的二氧化氯加入量为100 mg/L,处理后废水降黏率为40.9%。3种氧化法对模拟聚合物驱废水的降黏率大小顺序为:次氯酸钙氧化法>UV-Fenton试剂氧化法>二氧化氯氧化法。     

异烟酸铜磁力搅拌微固相萃取-气相色谱法测定土壤中多环芳烃

建立了膜保护异烟酸铜微固相萃取的样品前处理方法,并采用气相色谱氢火焰离子化检测器对土壤中的痕量荧蒽(Flt)、苯并［b］荧蒽(BbF)、苯并［k］荧蒽(BkF)、苯并［a］芘(BaP)进行了测定. 考察了水温、萃取时间和超声洗脱时间等对萃取效果的影响. 结果表明:在最佳试验条件下,Flt的检出限为1.0 ng/g;BbF,BkF和BaP的检出限为2.5 ng/g. Flt的线性范围为2.5～500.0 ng/g;BbF,BkF和BaP的线性范围均为12.5～500.0 ng/g. 相对标准偏差(RSD)为4.4%～13.7%(n9). 采用该方法分析了2种实际土壤中的4种多环芳烃,回收率为34%～90%.      

接枝羧基淀粉对贵金属离子吸附性能研究

研究了接枝羧基淀粉（ＩＳＣ）对贵金属离子Ａｇ（Ⅰ）,Ｐｄ（Ⅱ）、Ｐｔ（Ⅳ）的静态吸附性能和选择性及介质的ＰＨ对其吸附性能的影响,利用接枝羧基淀粉与Ａｇ（Ⅰ）形成螯合物的红外光谱和Ｘ－射线光电子能谱数据（ＸＰＳ）探讨了其吸附作用机理。     

不同交联剂制备的环氧氯丙烷-二甲胺聚合物的结构及脱色性能

以环氧氯丙烷和二甲胺为原料,加入不同的胺类交联剂(乙二胺、二乙烯三胺和三乙烯四胺)合成出一系列环氧氯丙烷-二甲胺聚合物(EPI-DMA).研究了交联剂及用量对产品特性的影响;利用红外光谱(IR)和电子透射电镜(TEM)等现代分析仪器研究了EPI-DMA的结构及在水中的聚集形态;并通过烧杯实验研究了EPI-DMA对染料模拟废水和实际印染废水的处理效果.结果表明,交联剂的加入使EPI-DMA的粘度和阳离子度发生变化;不同交联剂制备的EPI-DMA的IR谱图相差不大,但在水溶液中的结构形貌不相同;EPI-DMA处理模拟活性艳红废水时以电中和和吸附架桥为作用机理,在处理还原大红废水时以电中和作用为主;在用EPI-DMA处理实际废水时脱色率和COD的去除率分别可达80%和60%.     

Preparation and characterization of organic polymer modified composite polyaluminum chloride

Compared with traditional aluminum salts, polyaluminum chloride （PACI） has better coagulation-flocculation performance in turbidity removal. However, it is still inferior to organic polymers in terms of bridging function. In order to improve the aggregating property of PACl, different composite PACl flocculants were prepared with various organic polymers. The effect of organic polymer on the distribution or Al（Ⅲ） species in composite flocculants was studied using ^27TAl NMR and Al-ferron complexation methods. The charge neutralization and surface adsorption characteristics of composite flocculants were also investigated. Jar tests were conducted to evaluate the turbidity removal efficacy of organic polymer modified composite flocculants. The study shows that cationic polymer and anionic polymer have significant influences on the coagulation-flocculation behaviors of PACl. Both cationic and anionic polymers can improve the turbidity removal performancc of PACl but the mechanisms arc much different： cationic organic polymer mainly increases the charge neutralization ability, but anionic polymer mainly enhances the bridging function.     

Synthesis of core-shell magnetic molecular imprinted polymer by the surface RAFT polymerization for the fast and selective removal of endocrine disrupting chemicals from aqueous solutions

In this study, we present a general protocol for the making of surface-imprinted core-shell magnetic beads via reversible addition-fragmentation chain transfer (RAFT) polymerization using RAFT agent functionalized iron oxide nanoparticles as the chain transfer agent. The resulting composites were characterized by X-ray diffraction (XRD) and Fourier transform infrared (FT-IR) analysis, thermogravimetric analysis (TGA), vibrating sample magnetometer (VSM), and scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The surface-imprinted magnetic beads were demonstrated with a homogeneous polymer films (thickness of about 22 nm), spherical shape, and exhibited magnetic property (Ms = 0.41 mA m² g⁻¹) and thermal stability. Rebinding experiments were carried out to determine the specific binding capacity and selective recognition. The as-synthesized surface-imprinted core-shell magnetic beads showed outstanding affinity and selectivity towards bisphenol A over structurally related compounds, and easily reach the magnetic separation under an external magnetic field. In addition, the resulting composites reusability without obviously deterioration in performance was demonstrated at least five repeated cycles.     

Application of nanobalance technique and principal component analysis for detection of the soil fumigant Telone residues in the air

Quartz crystal nanobalance (QCN) technique is considered as a powerful mass sensitive sensor for monitoring of materials in the sub-nanogram level. In the current study, a method based on QCN technique developed to determine Telone in air. Various coating materials including methyl phenyl silicon, 75% phenyl (OV25) and molecularly imprinted polymer (MIP) were employed. The frequency shift of OV25-modified quartz crystal was found to be linear against organohalogen compounds [Telone (soil fumigant), Koril (Herbicide), Endosulfan (organochlorine insecticide) and Chloroform (solvent)] concentrations in the range of 2.4 to 48 mg L^?1 for Telone vapor and 4.8–24 mg L^?1 for three other vapors. The correlation coefficients for Telone, Koril, Endosulfan and Chloroform were 0.992, 0.996, 0.989 and 0.991, respectively. The principal component analysis was also utilized to process the frequency response data of the organic vapors. Using principal component analysis, it was found that more than 93.85% of the data variance could still be explained by use of two principal components (PC1 and PC2). Subsequently, the successful discrimination of Telone and other compounds was quite possible through the principal component analysis of the transient responses of the OV25-modified electrode. In the second method, a molecularly imprinted polymer-coated sensor for Telone was developed. Molecularly imprinted polymer coated quartz crystal (MIP-QCN) showed a selective response to Telone and gave a linear relationship between frequency shift and amount of Telone from 1 to 48 mg L^?1. In this investigation, the proficiency of MIP-QCN and OV25-modified QCN sensors were compared.     

大豆膳食纤维改性及其对阳离子染料吸附特性

对大豆膳食纤维进行了羧甲基化改性,并利用红外光谱(FT-IR)和扫描电镜(SEM)对其结构进行了表征.研究了羧甲基化大豆膳食纤维用量、吸附时间、吸附温度、溶液pH值等因素对其吸附亚甲基蓝、结晶紫和品红效果的影响.结果表明,当吸附温度为25℃、羧甲基化大豆膳食纤维浓度为20 mg/L、溶液pH值为6.8和吸附时间为60 min时,羧甲基化大豆膳食纤维对亚甲基蓝、结晶紫和品红的去除率分别达到96.4％、95.6％和94.7％.另外,此吸附过程较好地符合Langmuir和Freundlich等温吸附模型.     

高强钢绞线-聚合物砂浆加固低强度砖砌体的试验研究

提出了采用高强钢绞线-聚合物砂浆技术对低强度砖墙进行抗震加固的方法,通过一片采用高强钢铰线-聚合物砂浆面层加固的墙体和一片未加固的对比墙体的低周反复荷载试验,对该加固方法进行了检验。详细地分析了这两片墙体的破坏形态、极限承载力、滞回特性、耗能能力及刚度退化等抗震性能,并提出了加固墙体的抗剪承载力计算公式。研究结果表明,高强钢绞线-聚合物砂浆加固方法能有效地提高墙体的极限承载力,改善墙体的延性和刚度退化,并提高墙体的能量消耗能力,从而提高墙体的抗震性能。