PDMDAAC系列絮凝剂的脱色性能研究

研究了二甲基二烯丙基氯化铵聚合物（PDMDAAC）系列絮凝剂对活性染料废水和分散染料废水的脱色效果，考察了絮凝剂的特性粘度、阳离子度及结构等因素对脱色效果的影响，探讨了其脱色机理，并试验了与PAC复配的脱色效果。实验结果表明：絮凝剂的特性粘度越高，阳离子度越高，脱色效果越好；絮凝剂结构中引入乙烯基三甲氧基硅烷（VTMS）可使脱色效果胡所提高；PDMDAAC系列絮凝剂处理活性染料废水的机理是通过电中和作用，使染料分子从水中析出，然后通过吸附架桥作用使之聚集、沉降除去；PDMDAAC系列絮凝剂在处理分散染料废水时，吸附架桥为主导作用；PDMDAAC系列絮凝剂与PAC复配可使脱色效果更佳而且可以降低处理成本。     

一种新型阳离子复合磁絮凝剂的合成及其应用

在二甲基二烯丙基氯化铵和丙烯酰胺单体共聚反应中,引入经过油酸改性的Fe_3O_4颗粒,合成一种新型阳离子复合磁絮凝剂CMF。FTIR,XRD,TG和SEM分析表明,Fe_3O_4以磁核的形式均匀地分散在CMF中,且CMF中含有DMDAAC和AM特征官能团,有机物质量分数为62%。在高岭土模拟废水的混凝沉淀试验中,使用CMF作为絮凝剂相对于聚丙烯酰胺和聚合氯化铝,在较短的沉淀时间内取得了较高的浊度去除率。     

Nitrate removal from aqueous solutions by magnetic cationic hydrogel: Effect of electrostatic adsorption and mechanism

Excessive nitrate(NO_3~-) is among the most problematic surface water and groundwater pollutants.In this study,a type of magnetic cationic hydrogel(MCH) is employed for NO_3~-adsorption and well characterized herein.Its adsorption capacity is considerably pHdependent and achieves the optimal adsorption(maximum NO_3~--adsorption capacity is95.88±1.24 mg/g) when the pH level is 5.2-8.8.The fitting result using the homogeneous surface diffusion model indicates that the surface/film diffusion controls the adsorption rate,and NO_3~-approaches the center of MCH particles within 30 min.The diffusion coefficient(D_s) and external mass transfer coefficient(k_F) in the liquid phase are1.15 × 10~(-6) cm~2/min and 4.5 × 10~(-6) cm/min,respectively.The MCH is employed to treat surface water that contains 10 mg/L of NO_3~-,and it is found that the optimal magnetic separation time is 1.6 min.The high-efficiency mass transfer and magnetic separation of MCH during the adsorption-regeneration process favors its application in surface water treatment.Furthermore,the study of the mechanism involved reveals that both-N~+(CH_3)_3 groups and NO_3~-are convoluted in adsorption via electrostatic interactions.It is further found that ion exchange between NO_3~-and chlorine occurs.     

城市河道表层水及沉积物中微塑料的污染现状与污染行为

河流是微塑料从陆地向海洋传输的关键路径,在近年来得到了越来越多的研究重视.但实际上,目前关于城市不同区域河道表层水及沉积物中微塑料的污染现状及污染行为研究仍十分有限,相关问题依然不甚清晰.本文以上海市中心城区及郊区城镇区域的8条河道作为研究对象,共采集16个河道表层水及沉积物样品,采用高速摄像仪和傅立叶红外变换光谱仪鉴定样品中微塑料的丰度、尺寸、颜色、形状和类型等特征.结果表明,上海市城市河道表层水中微塑料的平均丰度为(7.5±2.8)个·L~(-1),而沉积物中微塑料的平均丰度(以湿重计)则达到了(1 575.5±758.4)个·kg~(-1).微塑料尺寸越小丰度越高.其中,低于500μm、纤维状、透明色和聚酯类的微塑料始终在上海市城市河道中占据主导地位,但沉积物中的微塑料分布更具多样性.相对于国内外其他城市河道中的微塑料污染,上海市城市河道中的微塑料污染较为严重.不同城市河道中,微塑料的形状和聚合物类型分布受到来源(主要为洗衣废水、个人护理产品和塑料废弃物等)、水动力学条件和本身理化性质等各种因素的较大影响.还进一步讨论了城市河道中微塑料的污染行为(来源、传输与归趋),并解析了各种环境因子对其造成的潜在影响.     

Preparation and characterization of a novel hybrid chelating material for effective adsorption of Cu(Ⅱ) and Pb(Ⅱ)

The discharge of heavy metal ions such as Cu~2+and Pb~2+poses a severe threat to public health and the environment owing to their extreme toxicity and bioaccumulation through food chains Herein, we report a novel organic–inorganic hybrid adsorbent, Al(OH)_3-poly(acrylamide dimethyldiallylammonium chloride)-graft-dithiocarbamate(APD), for rapid and effectiv removal of Cu~2+and Pb~2+. In this adsorbent, the "star-like" structure of Al(OH)3 poly(acrylamide-dimethyldiallylammonium chloride) served as the support of dithiocarbamat(DTC) functional groups for easy access of heavy metal ions and assisted development of larg and compact floccules. The synthesized adsorbent was characterized by scanning electron microscopy(SEM), transmission electron microscopy(TEM), Fourier transform infrared spectroscopy(FTIR), and thermogravimetric analysis(TGA). APD was demonstrated to hav rapid adsorption kinetics with an initial rate of 267.379 and 2569.373 mg/(g·min) as well a superior adsorption capacities of 317.777 and 586.699 mg/g for Cu~2+and Pb~2+respectively. Th adsorption process was spontaneous and endothermic, involving intraparticle diffusion and chemical interaction between heavy metal ions and the functional groups of APD. To assess it versatility and wide applicability, APD was also used in turbid heavy metal wastewater, and performed well in removing suspended particles and heavy metal ions simultaneously through flocculation and chelation. The rapid, convenient and effective adsorption of Cu~2+and Pb~2+give APD great potential for heavy metal decontamination in industrial applications.     

以可生物降解固体为碳源的城市污水厂尾水反硝化脱氮研究

针对城市污水厂尾水氮排放不达标的现象,提出以可生物降解聚合物作为固体碳源的反硝化生物滤池技术。研究结果表明,尾水中氮的去除率会随水力停留时间(HRT)的延长而增加,HRT≤8 h时,去除率增长速度较快;HRT>8 h时,脱氮效率增长趋于平缓。选用聚羟基丁酸戊酸共聚酯(PHBV)为碳源,HRT为8 h时脱氮效果最佳,连续稳定运行30 d,出水硝态氮的去除率达96.1%~97.4%,出水中总氮浓度达GB 3838—2002《地表水环境质量标准》Ⅴ类水标准。     

阳离子聚丙烯酰胺复配钠基膨润土处理模拟苯酚废水

将阳离子聚丙烯酰胺与钠基膨润土进行复配,制备出复合吸附剂,并将其用于模拟苯酚废水的处理。采用XRD和FTIR技术对复配前后的钠基膨润土进行了表征。表征结果显示:阳离子聚丙烯酰胺附着在钠基膨润土的表面,对钠基膨润土的表面具有改性作用,使其由亲水性变为疏水性。实验结果表明:在阳离子聚丙烯酰胺与钠基膨润土的复配比例为200 mg/g、反应时间为40 min、复合吸附剂投加量为6 g/L、废水p H为11的最佳条件下,于25℃处理苯酚质量浓度为50 mg/L的模拟苯酚废水,苯酚去除率达89.5%。     

不同类型清水剂处理油田含聚污水的效果对比

考察了阳离子型CWC-14、非离子型NQS-01和阴离子型AQS-08 3类清水剂对油田含聚污水的处理效果,对比了它们的作用特点和絮体性能。实验结果表明:在清水剂加入量350 mg/L、处理温度65℃、搅拌转速300 r/min、搅拌时间5 min的条件下,CWC-14、NQS-01和AQS-08对含聚污水的除油率分别为98.8%、98.0%和99.4%;NQS-01受处理温度、搅拌条件影响较大;CWC-14受污水中聚合物质量浓度影响最大。清水剂的絮体特点与其作用机理有关,CWC-14的絮凝速率最快,起效时间最短,絮体呈黏性大块状;NQS-01的絮凝速率最慢,起效时间最长,絮体呈浮油状;AQS-08的絮凝速率和起效时间适中,絮体呈松散状、流动性好。对比结果表明,非阳离子型清水剂可有效避免油田含聚污水处理过程中的黏性油泥问题。     

不饱和季铵盐的合成及其聚合物在化工及环保领域的应用

按不饱和基团的类型对不饱和季铵盐进行了分类,并综述了其合成方法。介绍了其聚合物在含油污水处理、抗菌、纺织品、新材料等领域的应用。阐述了在不饱和季铵盐的开发及其聚合物的应用方面存在的问题。指出了今后的发展方向:应该加大科研投入,加快新型不饱和季铵盐的研发进程,特别是在主结构设计、纯度提高以及新型絮凝剂单体的多样性方面,以制备出多功能性的单体和聚合物。     

Biodegradability,hydrolytic degradability,and builder performance in detergent formulations of partially dicarboxylated alginic acid

Partially dicarboxylated alginic acids with degree of dicarboxylations from 13 to 61 mol% were prepared and their biodegradability, hydrolytic degradability, and builder performances in detergent formulations were measured. Also, the correlations between biodegradability and hydrolytic degradability were examined with respect to the degree of dicarboxylation. The biodegradability of dicarboxylated alginic acid sodium salt (DCAa), evaluated by biochemical oxygen demand with activated sludge, depended on the degree of dicarboxylation. DCAa containing more than 75 mol% remaining uronide residues in the polymer chain showed excellent biodegradation. Hydrolytic degradation of DCAa depended on the degree of dicarboxylation and the pH of the incubation media. After 30-day incubation at 30°C at pH 4–6, a significant molecular weight reduction by hydrolytic degradation was observed for highly dicarboxylated alginic acid. DCAa with a high degree of dicarboxylation showed excellent builder performance in detergent formulations based on the detergency and calcium sequestration capacity.