聚合物在粘土及钻井液固体颗粒表面的吸附

围绕废弃钻井液的处理,采用非分散红外TOC仪测聚合物吸附量,研究了聚合物PAM、PHP、FA367、CPAM在粘土及钻井液固体颗粒表面的吸附特性,研究结果表明聚合物在粘土颗粒表面的吸附是高度不可逆的,聚合物高分子与粘土因氢键、静电及嵌入三种相互作用方式而吸附,阳离子型聚合物絮凝剂在钻井液固体颗粒表面比阴离子和非离子型絮凝剂有高得多的吸附性能,废弃钻井液的絮凝主要以“吸附架桥”机理为主。     

A respirometric method to measure mineralization of polymeric materials in a matured compost environment

A respirometric method was developed to measure the mineralization of polymeric materials in a matured compost environment. For the purpose of evaluating the method, results obtained for the mineralization of glucose and cellulose are presented. The matured compost, in addition to supplied nutrients, micronutrients, and an inoculum, serves as the matrix which supports the microbial activity. Recovery of the substrate carbon in the form of carbon dioxide from the glucose and cellulose added to test vessels was 68 and 70%, respectively. A statistical evaluation of the results obtained on substrate mineralization was carried out and showed acceptable reproducibility between replicate test vessels and test runs. The testing protocol developed has the following important characteristics: (1) the test reactors are maintained at 53 °C at a high solids loading (60% moisture), which has certain characteristics that are similar to a thermophilic compost environment; (2) the test matrix providing microbial activity is derived from readily available organic materials to facilitate reproducibility of the method in different laboratories; (3) the equipment required to perform this test is relatively inexpensive; and (4) the information obtained on polymer mineralization is vital to the study and development of biodegradable polymeric materials.Guest Editor: Dr. Graham Swift, Rohm & Haas.     

绿色高分子及其发展现状

本文介绍了高分子材料的用途及造成的危害,指出研究和使用绿色高分子材料的紧迫性和重要性,绿色高分子的要求、制造和应用,同时叙述了目前绿色高分子领域取得的进展和成就。     

高分子材料在环境中的危害及其对策

本文综述了高分子材料在生产过程、使用过程及其废弃物所带来的危害,以及解决危 害的对策。     

Synthesis of a block copolymer of poly(3-hydroxybutyrate) and poly(ethylene glycol) and its application to biodegradable polymer blends

A block copolymer {P[(R,S)-HB-b-EG]} of atactic poly[(R,S)-3-hydroxybutyrate] {P[(R,S)-HB]} and poly(ethylene glycol) (PEG) was prepared by the ring-opening polymerization of -butyrolactone in the presence of a macroinitiator (PEG/ZnEt₂/H₂O) which had been produced by the reaction of ,-dihydroxy PEG ( _n=3000) with ZnEt₂/H₂O (1/0.6) catalyst. The block copolymer ( _n=10,500, _w/ _n=1.2) was an A-B-A triblock copolymer comprising atactic P[(R,S)-HB] (A) and PEG (B) segments. The miscibility, physical properties, and biodegradability of binary blends of microbial poly[(R)-3-hydroxybutyrate] {P[(R)-HB]} with the block copolymer P[(R,S)-HB-b-EG] has been studied. The glass-transition temperature (T _g) data showed that the P[(R)-HB]/P[(R,S)-HB-b-EG] blend was miscible in the amorphous state. The P[(R)-HB] film became flexible and tough by means of blending with P[(R,S)-HB-b-EG] block copolymer. The enzymatic degradation of blend films was carried out at 37°C and pH 7.4 in a 0.1M phosphate solution of an extracellular PHB depolymerase fromAlcaligenes faecalis. The enzymatic degradation took place solely on the surface of the blend films.     

浅谈混凝剂在气田水处理中的应用

在重庆气矿气田水处理中加入了聚合氯化铝和聚丙烯酰胺,其应结果表明,这两种絮凝剂配合使用的效果较好,能达到石油企业废水回注指标(pH值为6～9,SS小于30mg/L,石油类物质少于10mg/L)。分析了两者单独使用的处理结果,针对目前使用中存在的问题,指出应注意的事项,并对今后重庆气矿气田水处理运行中混凝剂的使用提出了建议。     

天然有机高分子絮凝剂DXSL-I应用及环境效应的研究

对自制天然有机高分子絮凝剂DXSL-I实际应用和环境生物效应进行初步的实验研究。实验结果表明,DXSL-I对高浓度油污水具有较高的处理效率;当油份浓度大于2000×10-6g/L时,只需要处理10h,处理效率就能达到60％以上,可用于高浓度油污水的快速预处理。通过生物实验可以明显的观察到,孔雀鱼的LD50约为416×10-6g/L,泥鳅的LD50约为870×10-6g/L,因而可以推定其具有相对较高的环境安全性;而且经过DXSL-I常规浓度处理的养殖用水对某些水产养殖生物的生长具有改善促进作用。表明,DXSL-I在水处理中具有较理想的实际应用前景。     

不同交联剂制备的环氧氯丙烷-二甲胺聚合物的结构及脱色性能

以环氧氯丙烷和二甲胺为原料,加入不同的胺类交联剂(乙二胺、二乙烯三胺和三乙烯四胺)合成出一系列环氧氯丙烷-二甲胺聚合物(EPI-DMA).研究了交联剂及用量对产品特性的影响;利用红外光谱(IR)和电子透射电镜(TEM)等现代分析仪器研究了EPI-DMA的结构及在水中的聚集形态;并通过烧杯实验研究了EPI-DMA对染料模拟废水和实际印染废水的处理效果.结果表明,交联剂的加入使EPI-DMA的粘度和阳离子度发生变化;不同交联剂制备的EPI-DMA的IR谱图相差不大,但在水溶液中的结构形貌不相同;EPI-DMA处理模拟活性艳红废水时以电中和和吸附架桥为作用机理,在处理还原大红废水时以电中和作用为主;在用EPI-DMA处理实际废水时脱色率和COD的去除率分别可达80%和60%.     

Preparation and characterization of organic polymer modified composite polyaluminum chloride

Compared with traditional aluminum salts, polyaluminum chloride （PACI） has better coagulation-flocculation performance in turbidity removal. However, it is still inferior to organic polymers in terms of bridging function. In order to improve the aggregating property of PACl, different composite PACl flocculants were prepared with various organic polymers. The effect of organic polymer on the distribution or Al（Ⅲ） species in composite flocculants was studied using ^27TAl NMR and Al-ferron complexation methods. The charge neutralization and surface adsorption characteristics of composite flocculants were also investigated. Jar tests were conducted to evaluate the turbidity removal efficacy of organic polymer modified composite flocculants. The study shows that cationic polymer and anionic polymer have significant influences on the coagulation-flocculation behaviors of PACl. Both cationic and anionic polymers can improve the turbidity removal performancc of PACl but the mechanisms arc much different： cationic organic polymer mainly increases the charge neutralization ability, but anionic polymer mainly enhances the bridging function.     

聚硅酸硫酸铁混凝剂的性能研究

以硅酸钠、硫酸和硫酸铁为原料制备聚硅酸硫酸铁混凝剂（简称ＰＦＳＳ）,考察了ＰＦＳＳ在不同条件下水解产物表面的ζ电位变化情况,研究了Ｆｅ／ＳｉＯ２摩尔比和投加量对ＰＦＳＳ除浊效果的影响,试验了ＰＦＳＳ的最佳混凝ｐＨ范围与Ｆｅ／ＳｉＯ２摩尔比之间的关系,探讨了其混凝机理．结果表明,Ｆｅ／ＳｉＯ２摩尔比对ＰＦＳＳ水解产物的ζ电位、ＰＦ－ＳＳ的混凝效果以及ＰＦＳＳ适宜的最佳ｐＨ值范围都有影响;当Ｆｅ／ＳｉＯ２摩尔比达１．５左右时,ＰＦＳＳ的混凝除浊效果趋于最佳．