Brominated dioxins and furans in a cement kiln co-processing municipal solid waste

A field study and theoretical calculations were performed to clarify the levels, profiles, and distributions of polybrominated dibenzo-p-dioxins and dibenzofurans(PBDD/Fs) in a cement kiln co-processing solid waste, with a focus on the PBDF formation mechanism.The raw materials contributed greatly to input of PBDD/Fs into the cement kiln. The PBDD/F concentrations in the raw materials were much higher than those in particle samples from different process stages in the cement kiln. The PBDD/F concentrations in the clinkers were1.40% of the concentrations in the raw materials, which indicated that the high destruction efficiencies for PBDD/Fs by cement kiln. PBDD/F distribution patterns in particle samples collected from different process stages indicated the cement kiln backend was a major site for PBDD/F formation. PBDFs with high levels of halogenation, such as heptabrominated furans(Hp BDF), were the dominant contributors to the total PBDD/F concentrations and accounted for 42%–73% of the total PBDD/F concentrations in the particle samples. Our results showed that co-processing of municipal solid waste in a cement kiln may influence the congener profile of PBDD/Fs, especially for the higher halogenated PBDD fraction. In addition, there were significant correlations between the decabromodiphenyl ether and heptabrominated furan concentrations, which is an indicator of transformation from polybrominated diphenyl ethers to PBDD/Fs. Theoretical calculations were performed and demonstrated that elimination of HBr and Br_2 from polybrominated diphenyl ethers were the dominant formation pathways for PBDD/Fs. These pathways differed from that for polychlorinated dibenzo-p-dioxins and dibenzofurans(PCDD/Fs).     

重庆市新型干法水泥厂汞排放特征

以重庆市3个新型干法水泥厂为研究对象,分析典型水泥厂输入输出物料汞含量,探讨水泥厂中汞的来源和去向,研究重庆市典型新型干法水泥厂汞的排放特征,估算其大气汞排放量和排放因子.结果表明,3个水泥厂的汞主要来源为石灰石,其次为煤.石灰石汞含量为(0.025±0.001)~(0.032±0.002)mg·kg~(-1),煤汞含量为(0.080±0.002)~(0.110±0.012)mg·kg~(-1).脱硫石膏汞含量较高,为(0.447±0.007)~(0.525±0.009)mg·kg~(-1),其余原料的汞含量均较小.3个水泥厂排放的汞主要进入了烟气,脱硫石膏中的汞主要进入了水泥产品.3个水泥厂的大气汞排放量为(73.42±8.10)~(215.18±10.75)g·d-1,大气汞排放因子(EF熟料、EF水泥)分别为(0.016±0.001)~(0.049±0.001)g·t-1和(0.011±0.000)~(0.036±0.001)g·t-1,明显低于以往水泥行业采用的国外汞排放因子.     

生活垃圾焚烧飞灰固化体力学及重金属浸出特性

以苏州七子山生活垃圾焚烧厂产生的飞灰为研究对象,采用水泥作为固化剂,研究水泥飞灰固化体的应力应变特征及重金属浸出特性,并探讨了水泥飞灰配合比、养护时间等关键性因素对这些特性的影响。实验结果表明:较养护3 d的样品,其余养护时间的样品强度平均增长了约96.2%,而其破坏应变平均减小了56%。随着水泥含量和养护时间的增加,飞灰固化体的强度上升,而其破坏应变减小,该趋势主要归因于钙矾石(AFt)的形成促进了飞灰固化体强度的发展。较飞灰原样,飞灰固化体的重金属浸出浓度随着水泥含量、养护时间的增加而降低了38%~99%,重金属的迁移被限制,主要归因于水化硅酸钙(C—S—H)和钙矾石(AFt)的形成,以及飞灰和水泥水化反应创造的强碱性环境。     

Effectiveness of novel and traditional methods to incorporate industrial wastes in cementitious materials—An overview

Sustainable development and eco-efficiency are urgent and imperative demands for the well-being of our planet, continued growth of a society, and human development. Traditional Portland cement production seems unsustainable due to consumption of huge natural resources and energy and significant CO₂ emissions. The volume of industrial wastes is increasing significantly, leading to a number of economical and ecological problems. Although industrial wastes can be incorporated in cementitious materials by various traditional methods, the substitution ratio of industrial wastes in cementitious materials is relatively low to avoid unacceptable performance loss. Novel methods, such as improving hydraulic activities of metallurgical slags by adding composition adjusting material at high temperature, improving surface cementitious properties of fly ashes by dehydration and rehydration treatment, and arranging cement clinker and industrial wastes in the particle size distribution of blended cements according to their hydraulic activities, are reviewed. These methods provide more effective approach to prepare high performance blended cements with larger amount of industrial wastes, leading to a very significant role in CO₂ emissions reducing, resources and energy conservation of the cement industry.     

复合多管除尘器在湿法水泥回转窑除尘中的应用

把具有惯性沉降除尘、旋风子除尘两级一体功能的复合多管除尘器用于带湿式蒸发器的湿法水泥回转窑尾气除尘，替换原“旋风除尘器＋电除尘器”除尘系统中的多筒旋风器。运行测试表明，它的除尘效率达到９４６％，确保了窑尾排放烟尘浓度达到国家标准。     

大型回转窑托轮轴疲劳断裂分析与防治

回转窑由于其支承载荷分配不均 ,托轮轴疲劳断裂现象频繁 ,这就严重影响了生产的正常进行 ,造成重大的经济损失。笔者通过对回转窑的托轮轴进行力学分析 ,导出托轮轴等效对称循环应力幅的计算方法 ;对现场回转窑进行分析计算 ,得出该窑托轮轴危险截面等效应力幅与所受载荷的线性关系 ,从而得到托轮轴疲劳极限对应的载荷值和一些重要结论 ;提出通过轴线检测和调整来控制托轮所受载荷 ,使托轮轴处在疲劳极限下运行 ,从而减少托轮断轴事故带来的重大损失 ,有着较好的经济效益     

废物水泥窑共处置产品中Ni释放的pH影响

通过模拟煅烧实验制取水泥熟料,并制取混凝土样品。参照NEN7375浸出方法,设定5种不同pH值的浸取液,研究了pH值对混凝土块中重金属Ni释放的影响.结果表明,浸取液的pH=2.00、3.50、5.00、7.35和10.0时,混凝土中Ni的累积释放量分别为1.64、0.167、0.038、0.019和0.025mg/kg;酸性范围内,累积释放量随着pH值的增大而减小,并在弱碱性条件下达到最小值,碱性范围内,随pH值的增大而呈增加的趋势。pH值对Ni的释放过程有影响,pH=3.50和7.35的浸取液中,混凝土中Ni的释放机理为扩散控制,释放曲线与斜率为0.5的直线拟合较佳,且不同区间浸出量曲线的斜率均在0.35～0.65范围内;pH=2.00和5.00的溶液中,Ni的释放在前、中期为扩散控制,后期发生了耗竭作用;pH为10.0条件下,Ni的释放在前期发生了延滞现象,中期为扩散控制,而后期发生了耗竭。     

BP模型在水泥行业清洁生产评价案例中的应用

基于BP神经网络的原理与算法,建立清洁生产多指标综合评价模型,采用隶属度函数对评价指标进行描述。以避免评价过程中的人为失误,达到客观评价的目的。用该模型对重庆某水泥厂进行清洁生产评价,结果表明：该评价方法操作性强、准确性高、可为实现清洁生产的客观评价提供科学依据和技术方法。     

辽阳市水泥产业环境污染防治对策分析

分析了辽阳市水泥产业发展现状,提出辽阳水泥产业存在污染严重、破坏生态、工艺落后等问题,结合现实,提出调整结构、制订政策、加强监管、依靠科技等环境污染防治对策。     

基于技术的水泥工业大气颗粒物排放清单

针对我国水泥工业的生产技术及生产过程中的大气颗粒物排放控制技术分类,建立了一个基于技术、自下而上的大气颗粒物排放模型.通过分析我国水泥工业不同生产工艺所占比重的历史变化趋势,以及不同时期水泥工业大气颗粒物控制标准的影响,利用此模型计算了1990-2004年全国水泥工业大气颗粒物的排放系数和排放量.我国水泥工业的大气颗粒物的排放系数由1990年的27.9 kg·t-1水泥下降至2004年的8.05 kg·t-1水泥;大气颗粒物排放量自1990年起逐年增加,于1997年达到最高值l 044×104t,其中PM10排放量为716 X 104 t,PM2 5排放量为436×104t;此后逐年降低,到2001年后又有缓慢增加.我国水泥工业大气颗粒物排放量的地理分布很不均衡,山东、广东、河北、江苏、浙江和河南的排放量超过了全国总排放量的50%.新型干法水泥生产线替代立窑生产线的进程以及2004年<水泥工业大气污染物排放标准>的颁布将很可能大幅降低我国水泥工业的大气颗粒物排放量,从而在很大程度上影响我国的大气颗粒物污染特征.