水中氯离子的测定方法及其研究进展

离子是水体中常见的阴离子之一,其含量的测定是水质监测的一项重要指标.其浓度过高会使水质变差、危害身体健康、妨碍植物生长、腐蚀管道和设备.随着环境及环保法规要求的日益严格,水中氯离子的测定也越来越受到重视.综述了近年来水中氯离子的测定方法,主要包括滴定法、离子色谱法、分光光度法、电位滴定法、浊度法.介绍了上述方法的测定原理、特点、应用,并对各种方法进行了对比分析.     

The use of ionic liquids based on choline chloride for metal deposition: A green alternative?

Ionic liquids are studied intensively for different applications. They tend to be denoted as “green solvents”, largely because of their low vapour pressure. In recent years toxicity and biotoxicity of ionic liquids have also been investigated, which proved that not all of these are “green”. In this paper the use of ionic liquids based on choline chloride and ethylene glycol in electrochemistry is discussed in the context of their use as green solvents. Due to their low toxicity and ready biodegradability, these deep eutectic solvents are promising for the electrodeposition of metals. The influence of the use of these liquids as metal deposition baths on the waste water is investigated. Drag-out was found to be the most influencing parameter on the environmental impact of the process, as it is three times higher compared to classical solutions due to the higher viscosity of the ionic liquid. There are no major changes needed in the rinsing configuration of classic electroplating plants, and ion exchange to remove the metal out of the waste water was not hindered by the presence of the ionic liquid. The formation of by-products during the deposition of metals has to be further investigated and evaluated in consideration of the environmental impact.     

Are calcareous soils in uplands less prone to damage from road salting than acidic soils?

Previous studies of upland roadside soils in Cumbria, that would normally be naturally acidic, have highlighted that (a) runoff from roads subjected to long-term road salting can dramatically raise soil pH down slope in upland areas; (b) the soil pH increase dramatically changes N cycling in soils down slope, increasing mineralisation of organic matter, ammonification, ammonium leaching down slope and nitrification and nitrate leaching; (c) the increase in nitrification substantially increases nitrate leaching to down-slope rivers, and this is readily detectable in field studies; and (d) loss of soil organic matter over decades of salting is so great that organic matter is no longer substantially solubilised by high salt concentrations found in soil solution below road drains. This paper tests and supports the hypothesis that such effects are minimal for more calcareous soil ecosystems. It examines the soil and soil solution chemistry on another Cumbrian upland highway, the A686 near Leadgate, Alston. Sodium % of soil CEC values for soil transects affected by spray containing road salt are similar at both the A6 and A686 sites. However, spatial trends in calcium, magnesium, ammonium, and nitrate concentrations as well as pH differ, as a direct result of the higher weathering rate of parent material and possibly also the presence of limestone walls above both spray-affected and control transects at the A686 site.     

High efficiency chlorine removal from polyvinyl chloride (PVC) pyrolysis with a gas–liquid fluidized bed reactor

In this research a gas–liquid fluidized bed reactor was developed for removing chlorine (Cl) from polyvinyl chloride (PVC) to favor its pyrolysis treatment. In order to efficiently remove Cl within a limited time before extensive generation of hydrocarbon products, the gas–liquid fluidized bed reactor was running at 280–320 °C, where hot N₂ was used as fluidizing gas to fluidize the molten polymer, letting the molten polymer contact well with N₂ to release Cl in form of HCl. Experimental results showed that dechlorination efficiency is mainly temperature dependent and 300 °C is a proper reaction temperature for efficient dechlorination within a limited time duration and for prevention of extensive pyrolysis; under this temperature 99.5% of Cl removal efficiency can be obtained within reaction time around 1 min after melting is completed as the flow rate of N₂ gas was set around 0.47–0.85 Nm³ kg^?1 for the molten PVC. Larger N₂ flow rate and additives in PVC would enhance HCl release but did not change the final dechlorination efficiency; and excessive N₂ flow rate should be avoided for prevention of polymer entrainment. HCl is emitted from PVC granules or scraps at the mean time they started to melt and the melting stage should be taken into consideration when design the gas–liquid fluidized bed reactor for dechlorination.     

Hg0 removal from flue gas over different zeolites modified by FeCl3

The elemental mercury removal abilities of three different zeolites(Na A, Na X, HZSM-5)impregnated with iron(Ⅲ) chloride were studied on a lab-scale fixed-bed reactor. X-ray diffraction, nitrogen adsorption porosimetry, Fourier transform infrared spectroscopy,X-ray photoelectron spectroscopy, and temperature programmed desorption(TPD) analyses were used to investigate the physicochemical properties. Results indicated that the pore structure and active chloride species on the surface of the samples are the key factors for physisorption and oxidation of Hg0, respectively. Relatively high surface area and micropore volume are beneficial to efficient mercury adsorption. The active Cl species generated on the surface of the samples were effective oxidants able to convert elemental mercury(Hg0)into oxidized mercury(Hg2+). The crystallization of Na Cl due to the ion exchange effect during the impregnation of Na A and Na X reduced the number of active Cl species on the surface, and restricted the physisorption of Hg0. Therefore, the Hg0 removal efficiencies of the samples were inhibited. The TPD analysis revealed that the species of mercury on the surface of Fe Cl3–HZSM-5 was mainly in the form of mercuric chloride(Hg Cl2), while on Fe Cl3–Na X and Fe Cl3–Na A it was mainly mercuric oxide(Hg O).     

Hg removal from flue gas over different zeolites modified by FeCl3

The elemental mercury removal abilities of three different zeolites (NaA, NaX, HZSM-5) impregnated with iron(III) chloride were studied on a lab-scale fixed-bed reactor. X-ray diffraction, nitrogen adsorption porosimetry, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and temperature programmed desorption (TPD) analyses were used to investigate the physicochemical properties. Results indicated that the pore structure and active chloride species on the surface of the samples are the key factors for physisorption and oxidation of Hg⁰, respectively. Relatively high surface area and micropore volume are beneficial to efficient mercury adsorption. The active Cl species generated on the surface of the samples were effective oxidants able to convert elemental mercury (Hg⁰) into oxidized mercury (Hg^2 +). The crystallization of NaCl due to the ion exchange effect during the impregnation of NaA and NaX reduced the number of active Cl species on the surface, and restricted the physisorption of Hg⁰. Therefore, the Hg⁰ removal efficiencies of the samples were inhibited. The TPD analysis revealed that the species of mercury on the surface of FeCl₃–HZSM-5 was mainly in the form of mercuric chloride (HgCl₂), while on FeCl₃–NaX and FeCl₃–NaA it was mainly mercuric oxide (HgO).     

电位滴定法测定水中氯化物的不确定度评定研究

根据《测量不确定度评定与表示》（JJF 1059.1-2012）,建立了实验室电位滴定仪测定水中氯化物不确定度数学模型,分析了整个过程各种不确定度的影响因素,量化各不确定度分量,计算合成不确定度和扩展不确定度.本次测量结果为（110±6.18） mg/L,合成相对不确定度值为0.028 1,扩展不确定度为6.18 mg/L.电位滴定仪测定氯化物的不确定度主要来源是样品重复测定和滴定终点体积读数.     

Color removal from dye-containing wastewater by magnesium chloride

Color removal by MgCl(2) when treating synthetic waste containing pure dyes was studied. The color removal efficiency of MgCl(2)/Ca(OH)(2) was compared with that of Al(2)(SO(4))(3), polyaluminum chloride (PAC) and FeSO(4)/Ca(OH)(2). The mechanism of color removal by MgCl(2) was also investigated. The experimental results show that the color removal efficiency of MgCl(2) is related to the type of dye and depends on the pH of the waste and the dosage of the coagulants used. Treatment of waste containing reactive dye or dispersed dye with MgCl(2) yielded an optimum color removal ratio when the pH of the solution was equal to or above 12.0. For both the reactive and dispersed dye waste, MgCl(2)/Ca(OH)(2) was shown to be superior to MgCl(2)/NaOH, Al(2)(SO(4))(3), PAC and FeSO(4)/Ca(OH)(2) for color removal. A magnesium hydroxide precipitate formed at pH values greater than 12.0, which provided a large adsorptive surface area and a positive electrostatic surface charge, enabling it to remove the dyes through charge neutralization and an adsorptive coagulating mechanism. So, the MgCl(2)/Ca(OH)(2) system is a viable alternative to some of the more conventional forms of chemical treatment, especially for treating actual textile waste with high natural pH.     

Removal of phenol from aqueous solution by adsorption onto OTMAC-modified attapulgite

The potential of octodecyl trimethyl ammonium chloride (OTMAC)-modified attapulgite (AT) for phenol adsorption from aqueous solutions was studied. The comparison of natural AT and modified AT showed that it is possible to utilize the sonication-modified OTMAC-AT in the treatment of phenol-contaminated wastewaters. Batch sorption studies were carried out to evaluate the effect of contact time, shaking frequency, temperature and the amount of AT. The results showed that in a lab-scale reactor, at room temperature, with an amount of the modified AT added (2.5 g), and a shaking frequency of 140 rev/min, the adsorption rate of phenol could be 60.4% for a duration of 60 min. The sorption kinetics were described by a pseudo-second-order model, and the values of k and q(e) were 1.367 mg/ig min and 0.7901 ig/mg, respectively. The analysis of equilibrium data showed that the Freundlich isotherms were found to be applicable for the adsorption equilibrium data. K and 1/n were estimated to be 14.53 and 0.8438, respectively.     

水中氯化物测定的不确定度评定

根据硝酸银滴定法测定水中氯化物的含量，分析了该方法测量不确定度的来源，评定了水中氯化物的测量不确定度，在各不确定度中，以标准溶液配制与样品分析时滴定消耗的硝酸银体积引入的不确定度较大。